Mora Staender measuring machine

Mora

Condition: new, Year of construction: 2025, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Design Design: Bridge measuring machine Guidance system: High-precision air bearing guides Measuring range X-axis: 700 mm Y-axis: 1000 mm Z-axis: 700 mm Accuracy: 1.7 + l/300 Vectorial acceleration: 1732 mm/s² Vectorial velocity: 519 mm/s Nodpfxozf H Eus Ah Sscu Probing system Measurement technology: Tactile Type: PH10M / TP20 Equipment Probe changing system: Included

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 8,289 h, load capacity: 7,000 kg, lifting height: 3,200 mm, fuel type: gas, mast type: simplex, construction height: 2,750 mm, fork carriage width: 1,600 mm, fork length: 1,600 mm, empty load weight: 10,700 kg, total length: 3,450 mm, drive type: Treibgas, construction width: 1,550 mm, Compact forklift - LPG Ncjdpfxou Dztxe Ah Sju Load center of gravity: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 355-65-15 Rear tires type: Superelastic Rear tires size: 2.50-15 Description: In addition to this Mora model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this M70C P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Heating, full cabin,

Condition: used, Technical details: Ncsdpsval Iujfx Ah Ssu floor-plate length: 3500 mm plate width: 1500 mm plate height: 345 mm weight of the machine ca.: 3,7 / pro Platte t transport dimensions LxWxH: ca. 3,5 x 1,5 x 0,35 / pro Platte m Es stehen 4 Aufspannplatten zum Verkauf. There are 4 clamping plates for sale. Manufacturer: MORA-Meuselwitzer Guss Material cast steel T-slot according to DIN 650: a=13.5; h=24; b=24.5; c=11mm one long side surface finely milled 2x plates are equipped with guide rails *

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DATA Accuracy: from 3.0 + L/250 µm Measuring range X-axis: 3,500 mm Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Ncedpfeyr Simex Ah Sou Type of input current: Three-phase Equipment: Lighting, documentation/manual, nameplate available Details of the offer Description Portal measuring machine Manufacturer: Mora Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, Type MS10 Control panel on wheels Measuring and evaluation unit 2 PCs, Manufacturer HP, Type XW4300/Z220 2 monitors, 19/24", Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, W 1,000 mm, 7 drawers. Contents: Infrared measuring probe, Manufacturer Renishaw, Type PH10M, Calibration mandrel, accessories

Year of construction: 2000, condition: used, Spare parts for measuring machine MORA Mü-Tos. Includes: 2 measuring stands, 2 measuring control units, and various other parts. Nsdpfxjiuiaus Ah Sjcu

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 4,278 h, load capacity: 10,000 kg, lifting height: 5,400 mm, free lift: 1,710 mm, fuel type: diesel, mast type: triplex, construction height: 3,008 mm, fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Mast Type: Triplex Ncodpfxev R Nmco Ah Sju Transmission: Hydrostatic Condition: Ready for use and fully functional Technical Condition: Normal Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Super Elastic Rear Tires Condition: 60 - 80% Sideshift, Fork Positioner, 3rd Valve, 4th Valve

Condition: used, Diesel-powered forklift, compact forklift, MORA Type M80CS Manufacturer's No. 20087, Year of Manufacture 2006 Rated load capacity: 8 tons Lifting height: 3800 mm Fork length: 1800 mm Fork carriage width: 1460 mm Overall height: 3030 mm Overall width: 1460 mm Overall length without forks: 3350 mm Self-weight: 12740 kg - Duplex mast with 1950 mm free lift - 4-cylinder PERKINS diesel engine - Fully enclosed cab with heater - Electro-hydraulic tilting mechanism for the cab - Hydraulic power steering - 2 work lights at the front, 1 work light at the rear Nsdpfx Ahjitv Rdj Socu - Yellow warning flashing light on the protective roof - Solid rubber tires (front: 28 x 10 x 22, rear: 250/70 - 16) - 9646 operating hours recorded - New UVV/TÜV inspection passed Good condition Rental available upon request.

Condition: ready for operation (used), Year of construction: 2019, total height: 4,125 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, overall weight: 5,530 kg, table load: 4,500 kg, number of axes: 3, This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Additional equipment Ncsdpfxeyaacqe Ah Seu • 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) • Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller • Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) • Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters • FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system • Ø 30 mm reference sphere • INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) • Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer Machine Benefits Qualitative Machine Benefits • Condition: new, factory-sealed, immediate availability Technical Machine Benefits • Accuracy (iso 10360, typical with sp25m): mpee 3. 0 + l/300 µm | mpep 3. 0 µm | mpe_thp 4. 4 µm / 68 s • Dynamics: up to 519 mm/s | 1,732 mm/s² • Probing/scanning: renishaw ph10m + sp25m (sm25-1…-5), fcr25/fcr25-tc (temperature-controlled) • Software: inca3d premium (iges/step, scan options) • Operating conditions: 20 °c ±2 °c; temperature gradients ≤ 1 °c/h and ≤ 1 °c/m • Pneumatics: 6 bar, dry and oil/particle-free • Power (controller): 90–240 v, 50/60 hz, 16 a; approx. 600 va (psu up to 2,000 va) Dimensions Machine Depth 2505 mm

Condition: good (used), Year of construction: 2007, 2nd unit MORA-GEMODEK Type: MICROSPEED 10 Year 2007 Measuring machine control cabinet with remote control. Nsdpfx Ahjr Igwnj Secu

Condition: used, CNC 3D coordinate measuring machine, MORA type Pico 0245.04.05.06 Machine No. Year of manufacture 2005 Measuring range X = 600 mm, Y = 500 mm Measuring height Z-axis 400 mm Machine table = granite slab 1250 x 1200 mm Nodordlrxepfx Ah Sjcu Slab thickness 200 mm Clearance in machine column 720 mm Axis travel speed - setup max. 65 mm/sec. Axis travel speed - rapid traverse max. 250 mm/sec. Mains connection: 400 volts, 50 Hz - Granite worktop with 200 mm threaded grid - RENISHAW PH10T motorized rotary/tilt head with interchangeable TP20 measuring probe - 1 probe head holder with manual adjustment - Various probe heads - Gemodek Microspeed 10 axis control in adjacent control cabinet - Manual control via handheld control panel with joystick and LCD display - Reference sphere on the table - PC for measuring software: Intel Pentium 4, 512 MB RAM, mounted in the machine base - 22-inch TFT monitor - Windows XP operating system - INCA 3D measuring software (license expired) The measuring machine was operated with a rental license and maintenance contract. Measuring machine footprint: W x D x H 1950 x 1800 x 2450 mm Measuring machine weight: 1250 kg Control cabinet weight: 120 kg Very good condition