Used Key-way milling machines for sale
5
x-travel 500 mm
table size 300 x 900 mm
Bfeke9xggt
weight of the machine ca. 1,5 t
groove width:16 mm
x-travel:1000/1500 mm
throat:200 mm
y-travel:150 mm
z-travel:150 mm
spindle taper ISO:40
spindle motor:3 kW
spindle turning speed range:300 - 3600 U/min
quill stroke:150 mm
diameter of quill:100 mm
table surface area:1800 x 250 mm
total power requirement:9,5 kW
weight of the machine ca.:2,7 t
dimensions of the machine ca.:3,5 x 2,7 x 2,5 m
CNC SIEMENS 810 M
Indexing head with tailstock
Fkytawfge
4-fold toll changer table mounted
6
x-travel: 400 mm
S8zbdl2ay
y-travel: 100 mm
z-travel: 100 mm
electrics - voltage/frequency: 380/50 V/Hz
total power requirement: 0,8 kW
machine weight approx.: 80 kg
space requirements of the machine approx.: 1,6 x 0,6 x 1,4 m
This milling machine is ideally suited for window.
- long hole milling machine for aluminium
- pneumatic tool clamping
- feeder: hand lever operation
- safety device: 2,2 V
8
groove width 16 mm
x-travel 400 mm
table length 1260 mm
table width 375 mm
Nlpcl
total power requirement 4 kW
weight of the machine ca. 3 t
dimensions of the machine ca. 1,8 x 1,4 x 1,8 m
2
Milling machine with horisontal axe for planning and grooving
X= 600 mm
Y= 400 mm
B28xyzza9o
Z= 300 mm
3
x-travel:250 mm
spindle speed::450 - 1930 U/min
Mezcn
dimensions of the machine ca.:1,40 x 1,40 x 2,10 m
5
1 branded groove milling machine make: HURTH , type:LFV 1 table size 875 mm x 270 mm, speed 180 - 2800 rpm in 9 steps, stroke max.180 mm depth adjustment max 100 mm, collet chuck holder with collet chuck set operating key, operating instructions.
Dimensions: , width 1150 mm, depth 1300 mm, height 1750 mm.
Weight: approx. 1100Kg
The machine is visually and technically in good condition and functions perfectly. Gladly you can visit the machine in our warehouse under power and test to convince them...
6
HURTH KF32A Twin Spindle Automatic Spline Milling Machine or key way millling machine
New 1989
EQUIPPED WITH:
New 1980’s, machine table size (clamping standard) 1,500mm x 375mm, max cutter diameter 95mm, cutter spindle taper ISO 40, distance spindle axis to table min 150mm max 250mm, spindle head travel 400mm, vertical adjustment (hand) 100mm, AMT – 150 twin spindle automatic indexing head, HRK hydraulic tailstocks.
Muy2ic
6
x-travel: mm
y-travel: mm
z-travel: mm
table surface area: 1970 x 400 mm
distance between table/spindle: min./max. 150 / 250 mm
rapid traverse: 1 / 2 m/min
revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min
milling spindle taper: DIN 2019 = Nr. 40 (SK40)
axial adjustment: manuell = 150 mm
quill feed: 0,012 / 0,025 / 0,05 mm/U
feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min
total power requirement: ca. 8,4 (10,5 kVA) kW
machine weight approx.: 3000 kg
dimension ma...
1
Grooving machine Fab. HURTH Type LFV 3
Machine # 3566 estimated year of manufacture 1963
Technical data:
Slot width max. 30.35 mm
Travel X 550 mm
Naa8wrjo3
Travel Y 300 mm
Travel Z 400 mm
Spindle mounting ISO SK 40
carriage travel 240 mm
Depth feed spindle stroke 0-110 mm
Table size 300 x 1200 mm
table width 350 mm
Projection 415 mm
8 spindle speeds 90-1000 rpm
9 Crank feeds 1.4-22.4 p. min.
9 table feeds length 10,9-163 mm/min
Table drive 0,37 kW
spindle drive approx. 2,5 kW
spindle throat 410...
12
Used grooving machine
Internal machine number m3154
B3h0tfwdlj
Manufacturer BUSCH
Type NF 1 / REP
year of manufacture 1969/89
Ma. No. 1 / 615
clamping surface 600 x 250 mm
groove length up to 200 mm
slot width up to 30 mm
Groove depth up to 100 mm
Drive power 1.4/2.2 kW
Speeds from 350 to 3,500 rpm.
Weight approx. 950 kg
Item location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tested under power.
We will gladly send you more photos by e-mail.
A forklift / crane for loading is avai...
15
Manufacturer: Hurth
Model : LF 00
Machine No. : 719
Year of manufacture : ca.1960
Weight: ca. 400 KG
General / technical data:
used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment
groove width for cutter Ø: from 2 to 10mm
length of grooves in one cut: from 0 to 60mm + cutter diameter
10 depth feeds feeds: 0,03 to 0,3 mm
milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4...
1
Aut. keyway and slot milling machine make RUWO HAHNDORF
Type AF 56 Machine. # 63/2445/1 Year of construction 1963
M9wrqoxt8
Technical data:
Slot length 350 / 400 mm
Groove width up to 50 mm
Groove depth 15 - 40 mm
depth feed 0,1 - 0,5 mm
Infeed pitch 0.1 mm
Form feed 50 / 80 / 120 mm/min
7 spindle speeds 180 - 1000 rpm.
large shaft diameter 170 / 330 mm
tool holder MK 2
drive power 1,1 / 0,6 PS
Drive power of the side feed 0.17 HP
Dimensions L x W x H 1000 x 500 x 1100 mm
Weight approx. 270 kg
...
1
Slot milling machine make BUSCH type NF 1
machine. # 1/494 Year of manufacture 1963
technical data:
throat 200 mm
spindle length 250 mm
table size 250 x 610 mm
4 spindle speeds 380-1500 rpm.
drive power 9,8 kW
2mmsrse2
outer dimensions 1050 x 900 x 1800 mm
used, in good condition
