Used Degra for sale (29)

Condition: ready for operation (used), power: 134.102 kW (182.33 HP), empty load weight: 21,000 kg, total length: 5,000 mm, total width: 2,120 mm, total height: 2,140 mm, load capacity: 400,000 kg, operating speed: 15 mm/s, reverse speed: 49 mm/s, Richtpers voor balken en andere Elektrische aanpassing voor slag (voor repeterend werk) Handmatige aanpassing voor het openen van de buigmatrijs Aangedreven rollen om het werkstuk in te voeren Ijdpev Rwfgsfx Ad Nsht Max ram adjustment: 620 mm Max distance between table -- ram: 600 mm (1020 mm without tools)

Condition: excellent (used), Technical specifications: Ihjdpfexgbllsx Ad Nst Pressing force: 500 tons Distance between uprights: 4,300 mm Dimensions (length x width x height): approx. 5,100 x 900 x 4,300 / 5,600 mm For transport (in two parts): Dimensions: 2 x 5,100 x 900 x 3,050 mm Weight: 1x 15,700 kg – 1x 13,200 kg (total 28,900 kg) The seller assumes no liability for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, total height: 3,500 mm, total width: 2,800 mm, total length: 1,200 mm, pressing force: 300 t, ID105830 Hydraulic press Brand: Van De Graaf Type: HVK-300 Capacity: 300 tons Iedpfxswhc H Aj Ad Noht

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 500 h, load capacity: 200 kg, fuel type: diesel, empty load weight: 2,700 kg, drive type: Diesel, arm reach: 3,600 mm, working height: 9,650 mm, Dual-mode work platform Technical condition: Good Isdpfxew N Tv No Ad Njht Description: Diesel engine 18.8 kW, Stage V emissions, crawler chassis for road, rail chassis with 1,435 mm track gauge, ÖCU compartment, key safe, 2x fire extinguishers, towing bar, first aid kit, measurement device for height and lateral position of the catenary, biodegradable Panolin hydraulic oil, rail grounding equipment, towing earth cable, wind gauge, 2x wheel chocks, sound insulation for paneling, rubber mat for basket, toolbox including tandem trailer.

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 Ijdpfxex R Uw Ss Ad Noht * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, This listing is for a Millipore Progard TS2 Pretreatment Pack. The unit is in full working condition and is ready for immediate release. The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features: - Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes. - Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage. - Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality. Iedoxxyigepfx Ad Nsht - Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring: - e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Benefits: - Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system. - Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes. - Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime. - Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Year of construction: 2012, condition: ready for operation (used), This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, it's designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, it's ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine. Ijdpfxsx D Dxpj Ad Nsht Application Types Extrusion

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We deliver the perfect vacuum suction system for your application! - Delivery worldwide / Dealer inquiries welcome! Internal Number: #570 Images shown are sample photos. Actual equipment and color may differ. STS V-1.5 Vacuum Tank Trailer Tank: • 1,500-liter tank capacity • Tank hot-dip galvanized • Tank is slightly inclined to the rear for easier cleaning • Side cleaning opening in the tank to remove contaminants or blockages without opening the tank lid • Tank lid opens fully toward the passenger side and is secured with hook bolts • Standard dual safety system installed to prevent compressor damage • Siphon separator • Overflow with dual ball system and sight glass • Vacuum gauge on suction unit with protective frame • Mechanical level indicator with color scale Engine and Compressor: • MEC 3000 vacuum compressor with 3,500 L/min air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda industrial engine GX 390 • Electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose to prevent damage to the engine unit • Silencer for vacuum compressor with oil catch • Stainless steel heat shield above the exhaust • 1 liter biodegradable compressor oil stored in oil bottle holder • 5L fuel canister in holder • Standard funnel with long neck for convenient engine oil changes and refilling • All engine components and accessories housed in a lockable motor box • Aluminum motor box powder-coated in desired color Chassis: • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis, 2.7t • Track width matching passenger cars and Sprinters for optimal driving • Lowest possible center of gravity for the vacuum tank • 2 axles with 1,350 kg load capacity each and independent suspension from a renowned manufacturer • Continuous welded V-drawbar • Robust metal fenders with integrated lamp housing • Stanchion holders for quick and secure hose fastening with rubber bands • Storage options for tools and accessories Vacuum Tank Unit: • Overrun brake with automatic reversing function Ihodpjxffwvofx Ad Net • Self-locking ball coupling • Reinforced jockey wheel • 13-pin cable connection Connections and Hoses: • 2x 5m suction hoses (3”) with Perrot couplings • 1x 3” suction lance (1500 mm length) • 1x 3” Perrot connection on lower part of tank lid • 1x 3” Perrot connection, right side in direction of travel Custom builds and special equipment available upon request – Check it out: For more detailed information or images, please contact us directly. You’ll find a wide selection of other vehicles for SALE or RENT at: Subject to changes, prior sale, and errors. The buyer is required to independently verify the condition and features of the goods. Sale is made exclusively according to our terms and conditions and with the exclusion of any warranty.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DMN-WESTINGHOUSE PTD plug-type deflectors are specially designed for conveying powder and pellets with minimal degradation in pneumatic conveying systems. PTD plug type baffle is used in chemical, pharmaceutical, plastic, food and other related industries. The smooth passage of products is guaranteed by precision machining, good sealing and completely unobstructed passage. The user-friendly, foolproof design enables quick in-situ internal inspection, cleaning and replacement of seals if necessary. The PTD design complies with all applicable workplace safety legislation. Consequently, there are no moving parts on the outside. Pressure up to 3 bar g with static seals PTD 80 Aluminum housing, tube stainless steel Ø 76.1 x 2.0 mm Pneumatic operation 5/2 with two-way valve 2 coils 24 V DC Ihedpfxomgb Hhe Ad Njt With 2 inductive limit switches

Condition: good (used), Year of construction: 2013, Manufacturer / Model: ASAHI DEGRAF AFP 912 EH QDLF Type: Flexographic Plate Processor (Exposure – Heating – Drying – Light Finishing) Year of Manufacture: 2013 Location: Germany _____ Technical Data Model: AFP 912 EH QDLF Serial No.: 362.068 Electrics: 400 V 3 PH + N / 230 V 3 PH – 50/60 Hz Power: 9.5 kW Amperage: 15 / 28 A Weight: 720 kg _____ Iodpfoxq A Iijx Ad Njht Machine Description • Combined exposure, drying, and light-finishing system for flexographic plates • Suitable for Asahi AFP series plates (solvent and water-wash types) • Top-loading design with UV exposure and integrated heating unit • Touchscreen control panel with process parameter management • Compact all-in-one design for plate exposure, post-exposure, and light finishing • Stainless steel internal structure with advanced temperature control • CE certified – built by Degraf S.p.A., Italy • High-quality UV system for uniform and stable exposure • Machine complete and operational _____ General Condition The unit is in good working condition, complete and well-maintained. It is currently installed in production and can be inspected in operation upon prior appointment. All components and drawers are intact and original. _____

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side Ihedpfxed Hbp Ae Ad Nst - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Iodpfx Aoxhgawed Noht Efficient homogenisation for biochemical and biophysical research

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #575 The images shown are sample images. Actual features and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank • Tank capacity: 1,500 liters • Tank hot-dip galvanized • Tank slightly inclined to the rear for easier cleaning • Side cleaning port in the tank for removing contamination or blockages without opening the tank lid • Tank lid opens fully towards the passenger side and is secured with clamping screws • Equipped with 2 safety levels as standard to protect the compressor from damage • Syphon separator • Overflow with 2 balls and inspection glass • Pressure gauge on suction assembly with protective bracket • Mechanical level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 l air capacity • Max. vacuum: -0.8 bar (continuous operation at -0.5 bar) • Max. overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda GX 390 industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery and tank • Internal suction hose to prevent damage within the engine unit • Silencer with oil collector for vacuum compressor • Stainless steel heat shield above the exhaust • 1 liter of biodegradable compressor oil in holder • 5l fuel canister in holder • Standard long-neck funnel for changing and refilling engine oil • All engine components and accessories stored in lockable motor box • Aluminum motor box, powder coated in your chosen color Chassis Ijdpfx Adoxffw Ae Noht • Self-supporting chassis, fully hot-dip galvanized • Low-bed tandem chassis, 2.7t • Track width identical to car and Sprinter for optimal handling • Lowest possible center of gravity for the suction tank • 2x axles, each 1,350 kg load capacity, independent suspension from a renowned manufacturer • Continuous welded V-drawbar • Robust metal fenders with lamp housings • Stanchion holders for quick securing of suction hoses with rubber bands • Storage options for tools and accessories Suction Tank • Overrun brake with reverse-automatic • Automatically securing ball hitch • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5 m long with Perrot couplings • 1x suction lance 3" (1,500 mm long) • 1x Perrot connection (3") at the bottom of tank lid • 1x Perrot connection (3") side-mounted, right in direction of travel Custom builds and special equipment available on request - Check it out: For more detailed information and/or pictures, please contact us directly. A large selection of further vehicles for PURCHASE or RENTAL can be found at: Modifications, prior sale, and errors excepted. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is subject exclusively to our terms and conditions and excludes any warranty.

Condition: good (used), Year of construction: 2011, Manufacturer / Model: ASAHI DEGRAF AWP 1116 PD with AWP FILTER Type: Water-wash flexographic plate processor with filtration unit Year of Manufacture: 2010 / 2011 Location: Germany _____ Technical Data Unit Model Serial No. Year Electrics Power Amperage Main Processor ASAHI DEGRAF AWP 1116 PD 830 010 03-2011 400 V 3PH + N 50/60 Hz 19 kW 28 / 48.5 A Filter Unit ASAHI DEGRAF AWP FILTER FJD 383 011 10-2010 230 V 3PH 50 Hz 2 kW 6 / 10.5 A Iedpfx Ajxq A Icod Nsht _____ Machine Description • Automatic Asahi water-wash flexographic plate processor for AWP plates • Integrated drying, washout, and filtration sections • Touchscreen control panel with display for speed, temperature, and plate length • Adjustable washout speed and bath temperature • Separate AWP Filter unit for closed-loop water recycling • CE-certified, stainless steel construction • Compact and reliable design for continuous operation • Machine currently installed and operational _____ General Condition The equipment is in good working condition, complete and well-maintained. It can be inspected in operation at its current location by prior arrangement. All parts and panels are original and fully functional. _____

Condition: new, ESP Top Loading Spray Washing Machines Isdpfx Adot Rrko Njht ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #565 Please note: images are sample pictures. Actual equipment and color may vary. STS VR-2.0 Tank - 2,000-liter tank capacity - Hot-dip galvanized tank - Tank tilted slightly to the rear for easier cleaning - Hydraulic rear tipping approx. 20° for emptying via electro-hydraulic unit - Side flush opening in the tank to remove contamination or blockages without opening the tank lid - Tank lid opens fully to the passenger side and is secured with hook bolts - Equipped as standard with 2 safety levels to prevent compressor damage - Syphon separator – overflow with 2 balls and sight glass - Manometer on suction fitting with protective bracket - Mechanical fill level indicator with color scale Engine and Compressor - MEC 3000 vacuum compressor with 3,500 L/min air flow - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda GX 390 industrial engine – electric start, oil sensor, control panel with ignition lock, battery and tank - Internal suction hose to protect the motor unit - Muffler for the vacuum compressor with oil catch - Stainless steel heat deflector above muffler - 1 liter of biodegradable compressor oil stored in an oil bottle holder - 5-liter fuel canister in holder - Standard funnel with long neck for changing and refilling engine oil - All engine components and accessories stored in a lockable aluminum engine box, powder-coated in your preferred color Chassis - Fully self-supporting hot-dip galvanized chassis - Electrohydraulics with wired remote control Ihodpfx Aow Ehfxjd Not - Low-bed tandem chassis 3.5 t - Track width identical to car and Sprinter for optimal handling - Lowest possible center of gravity for the suction tank - 2 axles, each with 1,750 kg load capacity and single wheel suspension from a reputable manufacturer - Continuous welded V-drawbar - Sturdy metal fenders with integrated lamp housings - Stake brackets for quick securing of suction hoses using rubber bands - Storage options for tools and accessories Suction Tank - Overrun brake with reverse automatic - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses - 2x suction hoses (3") 5m long with Perrot couplings - 1x suction lance 3" (1,500mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right-hand side in the direction of travel Custom solutions and special equipment available on request - Check it out: For further details and/or images, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to verify the condition and equipment of the goods independently. Sales are made exclusively subject to our general terms and conditions and under exclusion of any liability for defects.

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system Isdpfx Aod Hbp Ejd Noht - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We provide you with the perfect vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #510 The images are sample images. Actual equipment and color may vary. STS VR-2.0 Tank: - 2,000-liter tank capacity - Galvanized steel tank - Tank slightly inclined backwards for easier cleaning - Hydraulic rear tipping with approx. 20° angle for emptying via electro-hydraulic unit - Lateral rinsing opening in the tank to remove contamination or blockages without opening the tank lid - Tank lid opens fully to the passenger side and is secured with hook bolts - Two safety stages standard to prevent compressor damage - Siphon separator – overflow with 2 balls and viewing glass - Vacuum gauge on suction equipment with protective bracket - Mechanical level indicator with color scale Engine and Compressor: - MEC 3000 vacuum compressor with 3,500 l/min air output - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery, and tank - Internal suction hose to prevent damage in the engine unit - Silencer for vacuum compressor with oil catch - Stainless steel heat shield above the exhaust - 1-liter biodegradable compressor oil stored in oil bottle holder - 5l petrol canister in holder - Standard funnel with long neck for engine oil changes/refill Iodpfx Aoxd Nt Ssd Njht - All engine-related components and accessories are housed in a lockable engine box - Engine box made of aluminum, powder-coated in desired color Chassis: - Self-supporting, fully galvanized chassis - Electro-hydraulics with wired remote control - 3.5t tandem low loader chassis - Track width identical to car and Sprinter for optimal driving characteristics - Lowest possible center of gravity for the vacuum tank - 2 axles with 1,750kg capacity each and independent suspension from a reputable manufacturer - Continuous welded V-drawbar - Robust fenders with metal lamp housings - Stake brackets for quick securing of suction hoses with rubber bands - Storage capability for tools and accessories Vacuum Tank: - Overrun brake with reversematic - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses: - 2x suction hoses (3”) 5m each with Perrot couplings - 1x suction lance 3” (1500mm length) - 1x Perrot connection (3”) in the lower part of the tank lid - 1x Perrot connection (3”) on the right side in driving direction Special builds and equipment available by request. Take a look: For further detailed information and/or photos, please contact us directly. A broad selection of other vehicles for PURCHASE or RENT is available at: Subject to changes, prior sale, and errors. The buyer is responsible for independently checking the condition and equipment of the goods. Sale is exclusively subject to our general terms and conditions and with any warranty excluded.

Condition: new, MSP – Manual Hand Spray Systems Isdpeh E Szmofx Ad Njht The MSP range of manual hand operated washing systems are made entirely from high quality stainless steel 304 and can be supplied high-pressure ump option achieving pressures of up to 60 bar. Thanks to a specially designed heavy-duty washing chamber the MSP range washes parts within a closed sealed envireonment ensuring the surrounding workplaces is kept clean, tidy and dry from pressurised water. The MSP range is enviromentally friendly by utilising alkaline aqueous biodegradable detergents and allows for effective energy consumption using a foot pedal operation that oprates the pump only when pressed. This makes the MSP a very capability unit and a must have for any workshop enviroments cleaning heavy soiled contaminants.

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries are welcome! Internal number: #514 The images are sample images. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank: - 1,500-liter tank capacity - Fully hot-dip galvanized tank - Tank slightly inclined to the rear for easier cleaning - Side rinsing port in the tank for removal of dirt or blockages without opening the tank lid - Tank lid opens completely to the passenger side and is secured with hook bolts - Equipped as standard with two safety stages to prevent compressor damage - Siphon separator - Overflow with two balls and sight glass - Pressure gauge on suction unit with protective shroud - Mechanical level indicator with colored scale Engine and Compressor: - MEC 3000 vacuum compressor with 3,500 l/min air capacity - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for vacuum compressor Ihjdpfx Adoxffwie Net - Honda industrial engine GX 390 - Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank - Internal intake hose to prevent damage to engine components - Silencer for the vacuum compressor with oil catchment - Stainless steel heat deflector plate above the exhaust - 1-liter bottle of biodegradable compressor oil stored in a dedicated bracket - 5-liter petrol canister in holder - Standard funnel with long neck for engine oil changes and refilling - All engine tech components and accessories stored securely in lockable aluminum engine box, powder-coated in the color of your choice Chassis: - Fully self-supporting chassis, completely hot-dip galvanized - Low-loader tandem chassis, 2.7 t gross weight - Track width matches that of passenger cars and Sprinters for optimal driving stability - Lowest possible center of gravity for the vacuum tank - 2 axles, each with 1,350 kg capacity and independent suspension from a renowned manufacturer - Continuous welded V-drawbar - Robust metal mudguards with integrated lamp housings - Stake holders for fast securing of suction hoses with bungee cords - Storage options for tools and accessories Vacuum Tank: - Overrun brake with automatic reverse function - Self-locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Fittings and Hoses: - 2x suction hoses (3") 5 meters long with Perrot couplings - 1x suction lance 3" (1,500 mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right side, in travel direction Special builds and equipment available on request - Check it out: For more detailed information and/or pictures, please contact us directly. You will find a wide range of other vehicles for SALE or RENT at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our general terms and conditions and under exclusion of any warranty.

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We supply you with the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #502 Please note: Images are sample pictures. Actual equipment and color may vary. STS V-2.0 Tank • Tank capacity: 2,000 liters • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Side rinsing port in the tank for removing contamination or blockages without opening the tank cover • Tank lid opens fully toward the passenger side and is secured with hook bolts • Two safety stages installed as standard to prevent compressor damage • Siphon separator – overflow protection with two balls and sight glass • Pressure gauge on the over-suction unit with protective guard • Mechanical level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 l/min air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose to avoid exposure inside the engine unit • Silencer for vacuum compressor with oil trap • Stainless steel heat shield above exhaust • 1 liter biodegradable compressor oil, stored in oil bottle holder • 5-liter fuel canister in holder Iodpfoxffv Sex Ad Neht • Standard funnel with long neck for changing and refilling engine oil • All engine components and accessories stored in lockable aluminum engine box, powder-coated in your desired color Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem axle chassis, 3.5 tons • Track width aligned with passenger cars and Sprinters for optimal driving performance • Lowest possible center of gravity for the tank • Two axles, each with 1,750 kg load capacity, independent wheel suspension from a renowned manufacturer • Continuous welded V-drawbar • Sturdy fenders with metal lamp housings • Stake holders for quick securing of suction hoses with rubber straps • Storage options for tools and accessories Vacuum Tank • Overrun brake with auto-reverse • Automatic safety ball coupling • Reinforced jockey wheel • 13-pin electrical connection Connections and Hoses • 2x suction hoses (3”) 5 meters long, with Perrot couplings • 1x suction lance 3” (1,500 mm long) • 1x Perrot coupling (3”) on lower tank lid • 1x Perrot coupling (3”) on the right side in driving direction Special builds and custom equipment available on request – Check us out: For more detailed information and/or images, please contact us directly. A wide selection of further vehicles for SALE or RENT can be found at: Subject to alterations, prior sale, and errors. The buyer is required to independently verify the condition and equipment of the goods. Sale exclusively under our general terms and conditions and with exclusion of any warranty.

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for your every need! - Delivery worldwide / Dealer inquiries welcome! Internal Number: #562 The images are sample illustrations. Actual equipment and color may vary. Ihjdpfx Adjxffwcj Njt STS V-1.5 Vacuum Suction Tank Trailer Tank - 1,500-litre tank capacity - Hot-dip galvanized tank - Tank slightly inclined to the rear for easier cleaning - Lateral cleaning port in the tank for removing contamination or blockages without opening the tank lid - Tank lid can be fully opened to the passenger side and secured with hook bolts - Standard with two safety levels to prevent compressor damage - Syphon separator - Overflow with 2 balls and sight glass - Pressure gauge on suction unit with protective bracket - Mechanical fill level indicator with colour scale Engine and Compressor - MEC 3000 vacuum compressor with 3,500 litre air performance - Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) - Maximum overpressure: 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda GX 390 industrial engine - Electric starter, oil sensor, control panel with ignition lock, battery and tank - Internal suction hose to protect the engine unit - Silencer for vacuum compressor with oil collector - Stainless steel heat shield over the exhaust - 1 litre biologically degradable compressor oil stored in oil bottle holder - 5L petrol can in holder - Standard funnel with long neck for changing and refilling engine oil - All engine components and accessories housed in lockable aluminium engine box, powder-coated in desired colour Chassis - Self-supporting, fully hot-dip galvanized chassis - Tandem low-loader chassis, 2.7t - Track width identical to car and Sprinter for optimal driving - Lowest possible centre of gravity for the suction tank - 2 axles, each with 1,350kg load capacity and independent suspension from reputable manufacturer - Continuous welded V-drawbar - Robust metal mudguards with lamp housings - Stake holders for quick securing of suction hoses with rubber straps - Storage options for tools and accessories Vacuum Tank - Overrun brake with reverse automatic - Self-locking ball coupling - Reinforced jockey wheel - 13-pin cable connection Connections and Hoses - 2 x suction hoses (3") 5m long with Perrot couplings - 1 x suction lance 3" (1500mm long) - 1 x Perrot connection (3") in tank lid, bottom - 1 x Perrot connection (3") lateral, facing right in driving direction Custom builds and special equipment available on request – Take a look: For further detailed information and/or pictures, please contact us directly. You will find a wide selection of other vehicles for SALE or RENT at: Subject to change, prior sale and errors excepted. The buyer is solely responsible for verifying the condition and equipment of the item. Sale exclusively in accordance with our T&Cs and with exclusion of any warranty.

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for your every need! - Worldwide delivery/Dealer inquiries welcome! Internal Number: #502 The images shown are sample images. Actual equipment and color may vary. STS V-2.0 Tank • 2,000 L capacity tank • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Lateral cleaning port on the tank to remove contamination or blockages without opening the tank lid • Tank lid opens fully to the passenger side and is secured with hook bolts • Standard dual safety levels installed to prevent compressor damage • Siphon separator – overflow protection with 2 balls and viewing glass • Pressure gauge on suction assembly with protective bracket • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor, 3,500 L air flow • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda GX 390 industrial engine – electric starter, oil sensor, control panel with ignition switch, battery, and tank • Internal suction hose to prevent damage within the engine unit • Silencer for vacuum compressor with oil collection • Stainless-steel heat shield above exhaust • 1 liter of biodegradable compressor oil, stored in oil bottle holder • 5L fuel canister in holder • Standard long-neck funnel for oil changes and refilling • All engine components and accessories stored in lockable engine compartment • Engine compartment made of aluminum and powder-coated in preferred color Chassis • Self-supporting chassis, fully hot-dip galvanized • Tandem low-loader chassis, 3.5t • Track width matches standard passenger cars and vans for optimal driving stability • Lowest possible center of gravity for the suction tank • 2 axles, each with 1,750 kg load capacity and independent suspension from a reputable manufacturer • Continuous welded V-drawbar • Robust metal fenders with integrated lamp housings • Stake holders for quick securing of suction hoses using rubber bands • Storage options for tools and accessories Vacuum Tank • Overrun brake with automatic reverse feature • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5m long with Perrot couplings • 1x suction lance 3" (1500mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") on the right side in the direction of travel Iedpfxew Ehfrs Ad Neht Custom builds and special equipment available on request – Check our offers! For more details or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is responsible for independently verifying the condition and features of the item. The sale is made exclusively according to our Terms & Conditions and with exclusion of any warranty.

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We deliver the optimal vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #561 The images provided are sample images. Actual equipment and color may differ. STS V-1.5 Vacuum Tank Trailer Tank ? Tank capacity 1,500 liters ? Hot-dip galvanized tank ? Tank slightly inclined to the rear for easier cleaning ? Lateral cleaning port to remove impurities or blockages without opening the tank lid ? Tank lid opens fully to the passenger side and is secured with hook bolts ? Standard with 2 safety stages installed to prevent compressor damage ? Siphon separator ? Overflow with 2 balls and sight glass ? Pressure gauge on over-suction unit with protective bracket ? Mechanical level indicator with color scale Engine and Compressor ? MEC 3000 vacuum compressor with 3,500 l/min air output ? Max. vacuum -0.8 bar (continuous at -0.5 bar) ? Max. overpressure 0.49 bar ? Maintenance-free V-belt drive for vacuum compressor ? Honda industrial engine GX 390 ? Electric starter, oil sensor, control panel with ignition lock, battery, and tank ? Internal suction hose to prevent damage inside the engine unit ? Vacuum compressor silencer with oil catch ? Stainless steel heat shield above exhaust ? 1 liter of biodegradable compressor oil stored in an oil bottle holder ? 5l fuel canister in holder ? Standard long-neck funnel for changing and refilling engine oil ? All engine components and accessories stored in a lockable aluminum engine box, powder coated in the color of your choice Chassis ? Self-supporting chassis, fully hot-dip galvanized ? Low loader tandem chassis 2.7 t ? Track width matches passenger cars and Sprinter for optimal driving performance ? Lowest possible center of gravity for the suction tank ? 2 axles, each with 1,350 kg load capacity and independent wheel suspension by a renowned manufacturer ? Continuous welded V-drawbar ? Sturdy metal fenders with lamp housings ? Stake brackets for quick securing of suction hoses with rubber bands ? Storage possibility for tools and accessories Vacuum Tank ? Overrun brake with automatic reverse function ? Automatic safety coupling ? Reinforced support wheel ? 13-pin electrical connector Connections and Hoses ? 2x suction hoses (3") 5 m each with Perrot couplings ? 1x suction lance 3" (1,500 mm length) ? 1x Perrot (3") connection at the bottom of the tank lid ? 1x Perrot (3") connection on the right side in travel direction Custom builds and special equipment available upon request - Take a look: Isdpfoxffv Ejx Ad Neht For further details and/or images, please contact us directly. A wide range of other vehicles for PURCHASE or RENT can be found at: Subject to alteration, prior sale and errors excepted. The buyer is obliged to independently check the condition and specifications of the goods. Sale is solely based on our general terms and conditions and exclusively without any warranty.

Condition: new, maximum load weight: 1,800 kg, overall weight: 2,700 kg, axle configuration: 2 axles, total width: 1,880 mm, total height: 1,910 mm, Year of construction: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! The price applies to the basic model without optional equipment. The images are sample images. Actual equipment and color may vary. Vacuum Tank STS V-1.5 * Tank capacity: 1,500 liters * Tank hot-dip galvanized and self-supporting chassis hot-dip galvanized * Continuous welded V-drawbar * Robust fenders with metal lamp housings * Low-loader tandem chassis, 2.7 tons Iedpfxsxdv Ipe Ad Njht * Track width identical to passenger cars and Sprinter for optimal driving * Lowest possible center of gravity for the suction tank * 2 Knott axles, each with 1,350 kg load capacity and independent wheel suspension * TÜV individual approval * Suction unit inclined for improved cleaning * Rinse opening to remove contamination or blockages without opening the tank lid * Tank lid opens completely to the passenger side and locks for safety * Tank lid secured with hook bolts (optional quick-release system available) * Standard with 2 safety levels to prevent compressor damage – Syphon separator – Overflow valve with 2 balls and sight glass – Pressure gauge on suction unit – Protective bar to safeguard pressure gauge and suction unit * Mechanical liquid level indicator from MZ with color scale * Mountings for quick securing of suction hoses with rubber tension band * Suction hoses with Perrot couplings * 1 x suction hose, 3” approx. 5m long * Suction hose unit: - Side 3” suction connection with slider - Suction lance 3”, 1500mm long - Suction hose and lance do not need to be disconnected from the suction port after use. * Aluminum enclosure for drive unit, powder coated in white * Storage space for tools and accessories between engine enclosure and suction tank * Internal intake hose to prevent dirt entering the engine unit * Petrol industrial engine B&S Vanguard 13 HP with oil sensor, fuel tank, and electric start * Stainless steel heat shield above the exhaust * Maintenance-free V-belt drive for vacuum compressor MEC 3000 with 3,500 l/min air capacity * Silencer for vacuum compressor with oil catch * 1 liter biologically degradable compressor oil in dedicated oil bottle holder * 5L fuel canister in holder * Standard long-neck funnel for changing and refilling engine oil * All engine-related components and accessories housed in a lockable motor box * STS V-FENDER BOX * Side transport boxes made of aluminum * 2 side transport boxes for hoses and accessories * 6 brackets for securing components with bungee cords or tie-down straps * Powder coated in white Custom builds and special equipment available on request – Check it out: For further details and/or images, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. Buyers are responsible for verifying condition and specification of items themselves. Sale is exclusively according to our terms and conditions and excludes any warranty.