Condition: ready for operation (used), Functionality: fully functional, overall weight: 800 kg, working height: 870 mm, power: 11 kW (14.96 HP), workpiece width (max.): 70 mm, Technical data: max. edge thickness: 5mm / 8mm max. workpiece height: approx. 40mm / 50mm min. workpiece height: approx. 250mm / 300mm Felisug Uqaoq Uphopg min. Workpiece width: approx. 70mm Feed speed: approx. 11m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11kW Electrical connection: 230/400V / 50/60 Hz Work table height: 870mm Dimensions (LxWxH): 4100x1400x1300mm Condition and details see pictures

Condition: excellent (used), Functionality: fully functional, workpiece length (max.): 140 mm, TECHNICAL DETAILS Minimum workpiece length: 140 mm Chain feed: 8 + 20 m/min Aggregate equipment Cross-cut saw unit: available Radius scraper unit: available Surface scraper: available Flush and radius milling unit: available Joining milling unit: available, with plunge-controlled diamond cutters Polishing unit: available Pressure unit: available Special functions Fpelevrzqcjiq Uphjg End position damping: for cross-cut saw unit Pneumatic-mechanical insertion lock: available Spraying of release agent and cleaning agent: available Cutter equipment: 60 mm Glue and heating system Infrared heating lamp: available Glue basin: Teflon-coated

Condition: as good as new (ex-display), Year of construction: 2024, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure Fsliqsd R U Ads Uphopg →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: used, Year of construction: 1995, Edge band thickness 0.3 - 8 mm, Glue-on height max. 51 mm, Edge band length min. 200 mm, Workpiece thickness 6 - 45 mm, Fpolien Hqkrsq Uphsg Workpiece width min. 60 mm, Workpiece length min. 180 mm, Feed speed approx. 11 m/min, Cartridge application system, Cross-cut saw station with 2 saw blades, Combi flush trimming unit, radius scraper, cleaning station, !!! Machine in not overhauled condition !!! bought as seen, without transportation and instruction. ex location Seevetal,

Year of construction: 2006, Condition: good (used), - Glue pot - Conversion: carried out by the company Hüttenhölscher in Verl - Application: glue application line for handle strips - Vacuum table: included Fsljibdyqsiq Uphepg - Automatic pressure zone: included

Condition: used, Year of construction: 1986, overall weight: 450 kg, plate length: 2,000 mm, 2700x1050x1700 Workpiece length max. 2000 mm Fslieua Ar Esq Uphopg

Condition: good (used), Year of construction: 1998, Functionality: fully functional, edge thickness (max.): 3 mm, compressed air connection: 6 bar, height adjustment type: mechanical, working height: 850 mm, power: 4.5 kW (6.12 HP), material thickness: 3 mm, plate height: 850 mm, pressure: 6 bar, space requirement height: 1,200 mm, space requirement length: 2,100 mm, space requirement width: 1,100 mm, tilt adjustment saw blade: 15°, HolzHer Quick 1433 CP Machine dimensions: -length 2100mm -Width 1100mm -Height 1200mm -Workpiece infeed height 850mm -Operating mode one-sided left Working dimensions: -Glue thickness 0.3mm-3mm -Cartridge glue application, no glue tray and therefore no cleaning necessary! -Glue height 50mm -Workpiece width min. 60mm -Workpiece length min. 180mm -Workpiece thickness 6mm-45mm Feed rate: 5m/min at 0.18KW Electrical connected load: 4.5 KW Fpsliq Uju E If Dspheg Compressed air connection: 6 bar Extraction: 400m3/h (at 6 mbar dyn pressure) Milling unit: 1942M swivel 15° Multifunctional trimming unit: flush, radius & chamfer trimming Machine has been tested, see video. (Video will be uploaded after advertisement release)

Condition: like new (used), Year of construction: 2013, IMA COMBIMA 2013 - 2x loading / unloading station - for PVC, ABS & solid wood edges - U-form layout - with KFA 20 aggregate - immediately available Fsliq Ujtxtkxophopg For more Info, Video and technical specs, please contact us.

Condition: as good as new (ex-display), Year of construction: 2024, Contour edge banding machine up to 140 mm Work piece thickness, Speed from 2,5 - 12m/min, Quick change glue pot, Glue pot and glue roller teflon coated, Standby function, tilting machine table up to 45° and digital length counter. Standard machine incl. the following options : →electropneumatic pre-melting unit for 2 Kg Cartridge →motorized driving mechanism (patented) →supporting bars with steel balls Feliq Ued Sb Dujphepg 67641340f3652

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Rectifier group with two motors Lamps to heat the edge of the panel 2-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Rounding unit FK 11 with 2 multifunction motors (gleaner + rounder) with control adjustment numeric automatically Edge scraper group Glue scraper group Brush group Fsliq Upevph Hlshepg

Year of construction: 1997, Condition: used, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit Fpeliq Usd Inktopheg

Condition: ready for operation (used), Year of construction: 1999, Release agent application 2 jointing cutters 1x counter run +1x center run Edge magazine with 6 channels Pressure zone 1 large pressure roller + 4 small holding pressure rollers Edge trimming front rear Flush trimming Copy corners Cleaning agent application Buffing longitudinal edges For edge material from 0.4 - 3mm thick Machine is equipped with a guide carriage to produce rectangular parts. 6-fold edge magazine. Fpolieua Arxjq Upheg Weight. approx. 4to

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 558/0-112, Weight approx. 1950 kg control panel 1888 Pre-milling unit 1961 edge feeding unit 1901 tracer nozzle Fpjliqeh Uyg Ej Uphjg printing unit 1913 MOT cross-cut unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for round milling scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1944 length approx. 5900 mm Connected load 21.4 A

Condition: as good as new (ex-display), Year of construction: 2024, Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material →Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins. →Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min. →Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal Fpeliq Upsd Sb Dtohsg →Pneumatic cutt-off unit capacity max. 3 x 30 mm →Turntable D=600mm 67641341015f6

Condition: used, Lot 1 squaring-edging line composed as follows: 1) "Easy Order" automatic feeder for longitudinal and transversal passage of panels * Automatic adjustment of the stops according to the size of the panel * Number of cycles / minute from 10 to 14 depending on the type of passage and size of the panel. The number of cycles / minute is minimal in the case in which panels with always different dimensions are worked * Workable dimensions for longitudinal passage: min 250 x 130 max 3000 x 1200 * Workable dimensions for cross passage: min 130 x 250 max 1200 x 3000 * Maximum panel weight: Kg 70 * Brushless motors 2) External milling machine for customized processing * Device for milling and removing material on the non-edged side of the panel * Ready for "Eco Power Pack" * N ° 1 motor 6,5Kw - 12000 rpm with vertical rotation axis * Pneumatic automatic vertical exclusion * Automatic lubrication of the guides 3) Bridge system for customized longitudinal and transversal machining * Automatic movement of the main guide on linear guides with Brusless motor * Automatic vertical exclusion of the main guide * Automatic lubrication of the guides * Max opening 3000 mm 4) "Watch" line supervisor with automation for handling and returning the panel to the operator * Numerical Control with PC Office Software with Windows 7 operating system * Barcode reader * Tele diagnosis * Supervision and control software for quick and easy management of the main functions of the squaring machine. * Realistic and descriptive interface that allows you to monitor the time and status of the squaring-edgebander. * Unlimited number of programs * Possibility of extrapolation of production reports 5) Manual loading station with automatic recognition of the size of the panels * N ° 3 air curtain benches (dim. 640 x 1600 mm each) for the positioning of the panels with roller conveyor for the progress of the same * Inclined and motorized introduction roller conveyor (dim. 2600 x 3200 mm) for the alignment of the panels on the guide principal * Main guide controlled by C.N. for alignment to the work line. * Barcode reader for automatic recognition of the dimensions of the introduced panel 6) Panel turner * Roller conveyor with 6 + 6 motorized rollers * Double plane group for rotation * Fully automatic motorized rotation controlled by encoder with adjustment by C.N. * Motorized roller conveyor at the exit of the squaring-edgebander 7) 90 ° translation station * N ° 2 transfers with rollers and belts (dim.1440 x 3200 mm and 1600 x 3200 mm) 8) 90 ° translation station * N ° 2 transfers with rollers and belts (dim.1440 x 3200 mm and 1600 x 3200 mm) 9) Rotation station for panels with a width greater than 1300mm * N ° 1 roller conveyor (dim.1280 x 2700 mm) 10) Transfer with 3 belt conveyors 11) 90 ° final translation station * N ° 1 transfer with rollers and belts (dim.1440 x 3200 mm) * N ° 1 transfer with rollers and belts (dim.1100 x 3200 mm) 12) Stefani Evolution SB One squad-edging machine * Numerical Control with PC Office Software with Windows operating system * DVD player * Tele diagnosis * Bar code reader with radiofrequency keyboard (with the possibility to customize the reading software and data entry) * Panel height 60 mm * Minimum panel width 90 mm * Maximum panel width 1600 mm * Variable feed speed 10 - 40 mt / min * Working height electronically adjustable by C.N. * AA anti-adhesive group * Double shredder group with electronic positioning Kw 5.8 + 5.8 * Rectifier unit wi... Fpolisvphxnjq Uphjg

Year of construction: 1995, Condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar Folienxkm Eoq Uphopg

Condition: as good as new (ex-display), Year of construction: 2024, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Fsliqol Rix Nj Uphepg Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: reconditioned (used), Year of construction: 1993, Functionality: fully functional, machine/vehicle number: 869/9-302, Connected load 380V 21A Edge magazine gluing station 1906 printing unit 1914 Crosscut saw unit 1976 Milling unit rounding 1943 Rounding scraper 1927 Buffing unit 1944 Fpeliq Uoiamufsphog Control panel top Suction nozzle D=100 mm operating instructions no exchange unit for flush milling

Condition: as good as new (ex-display), Year of construction: 2024, 67641340dc13f Fpsliol Rix Eeq Uphjg

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 315/0-110, Top control panel Edge feeding 1902 Glue application station 1906 cross-cut shear 1902 Printing unit 1816 Cross-cut unit 1918 Trimming unit 1942M Rounding scraper 1929 Form milling unit 1983 Fpeleh Ux Susiq Uphjg Surface scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar suction connection Ø 120 mm Length approx. 5300 mm

Condition: as good as new (ex-display), Year of construction: 2024, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Foleip Uzpsiq Uphjpg Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touch screen) with hot-melt glue application to the workpiece for edgebanding material up to 3 mm: maintenance-free, coated gluing bowl with exchangeable bowl preparation, HF cross-cut saw station (approx. 16,000 rpm) for front and rear edge overhang, HF trimming station (approx. 16,000 rpm) with exchangeable panel trimmer (combination version), router fine adjustment from the operator's side (Hebrock system), Fsliq Uel H E H Hophspg Corner rounding cutter (minimum workpiece length 300 mm, max. workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain drive, double roller top pressure, unit viewing window from the machine rear and operator side, extendable workpiece workpiece support, feed approx. 10 m/min, 60 mm workpiece thickness, incl. 1x exchangeable basin incl. chassis

Condition: as good as new (ex-display), Year of construction: 2024, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. Fpeljd R U Aceiq Uphog • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340eaae3

Year of construction: 1990, Condition: used, Power supply 400 V 3 kW Glue roller Milling unit 2x flush roll material up to 0,4 mm LxWxH: 3150 x 680 x 1250 mm weight approx. 400 kg Fpjlekkfk Noiq Uphjg Conversion to 2 mm PVC edges possible = additional price 1.000,00 €

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. →Automatic edge feeding for roller material over turntable D = 800 mm. →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t Foliq Usf Tdwcephspg