Edge banding machine

IMA Combima

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Ksdpfx Aozuyqvefkjdr Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed Kdsdpfx Afezuyqijksr - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Ksdpfx Aozuypxefkjdr Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Ksdpfxozuypls Afkodr Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 007857, Position 1: Horizontal Storage Systems IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 2: Beam panel saws with automatic warehouse IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 3: Single Edgebanders IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 4: Panel Feeding and Loading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 5: Panel Stacking and Offloading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Kdedpfx Afswuuf Dskjr Position 6: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 7: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 8: Cardboard Cutters IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 9: Strapping machine IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050 Kjdpfxoqy Em Ne Afkedr

Condition: used, machine/vehicle number: 006017, Position 1: Vertical Storage Systems IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 2: Angular Beam Panel Saws IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 3: Panel Feeding and Loading IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 4: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 5: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 6: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 7: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 8: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Kdjdpfx Aewukzhjfkor Position 9: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 10: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 11: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 12: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3 Kjdswuciwopfx Afksdr

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Kjdpfx Ajx A Hggjfkjdr

Condition: used, machine/vehicle number: 007514, Position 1: Roller Conveyors IMA-COMBIMA SYSTEM I Position 2: bordatriceLottoUno IMA-COMBIMA SYSTEM I Kdsdpfx Aswukznefkor Position 3: Roller Conveyors IMA-COMBIMA SYSTEM I Position 4: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 5: Roller Conveyors IMA-COMBIMA SYSTEM I Position 6: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 7: Roller Conveyors IMA-COMBIMA SYSTEM I Position 8: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 9: Roller Conveyors IMA-COMBIMA SYSTEM I