Condition: good (used), Year of construction: 2000, I sell the edge banding machine Holz-Her Sprint 1417 year 2000: Premilling Edge banding patron glue End cutting saws Strong flat milling Tilting radius milling Radius scrapers Corner rounding 1-motor Fpsliqod Nukqe Upheg Glue scrapers Polishing brushes New sharpened tools, new display, fully working. CE Mark. Good condition. With full documentation.

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Types:1436 Machine nr:261/9-04 Year of construction:1990 Glueing Caps,Milling Round milling Browning agreggat Rolen:3mm Thickness45mm Fpjliq Upeubyf Sehjg

Year of construction: 2001, Condition: excellent (used), JAROMA DCGA II LIGNUM curved edge bander Producer JAROMA DCGA II machine model / type Fpslegyz Rkjiq Uphsg Year of production 2001 Machine category Edgebander Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Startup type to be agreed Description Comments Equipment: - plate - guillotine - glue spreader - clamp - feed - adjustable table at 0-45 ° - workpiece thickness 1-4cm - edge thickness 0.03-0.3cm - 2 types of feed speed 4m / min, 6m / min - 2kW motor Overall dimensions: - length 127cm - width 165cm - height 148cm - weight 300kg - used edgebander - very good condition - unpainted - Polish production - year 2001

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 1000004052, Equipment: type plate available, For sale edgebanding machine Biesse Stream B1 8.5 with return table Edgebanding machine in continuous use - edgebanding in PUR and AIR FORCE technology feed rate 1-25 mb/min wrapping methods - AIR FORCE - PUR - EVA maximum height of the elements being glued - 40 mm maximum width of the elements on the return table - 1300 mm Fpslisu Suh Ssq Upheg line composition - 2 milling heads height 44mm - EVA / PUR overlay unit - AIR FORCE - drills - pre-profile cutters - rounders - groove saw - profile cyclers - flat cyclines - polishers magazine for 12 rolls of edge banding in case of questions please contact us.

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, overall weight: 915 kg, type of input current: three-phase, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, frequency: 50 Hz, Worktable dimensions 3465x710mm, height 875mm Gluing thickness roller edges 0.4 - 3mm Glue-on thickness strip edges up to 5mm, min - max. workpiece thickness 8-50mm min. Workpiece length/width with roller edges 190/110mm Fpeliq Upjuacqzshsg min. Length of panel 120mm Feed speed 9 m/min Feed motor 0.55 kW Working air pressure of pneumatics 6.5 bar Suction hood glue container 80mm 2 suction hoods Flush trimming unit 60mm 2 extraction hoods Pre-milling unit 80mm Working temperature 20-190C° Equipment: Pre-milling unit (jointing) Rounding unit (corner copying) Gluing unit, applying and pressing on the edge (self-lubricating glue pot) Trimming unit, for cutting off 90° of the protruding edge at the front and rear Flush trimming unit (joining) Scraper unit Buffing unit Surface scraper Automatic application of the strip edges with edge magazine Kit for quick change of the glue container Device for heating the panel edge Non-stick agent spraying unit Spraying unit for finishing the edge

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: F4769, HEBROCK F4 next Edge banding machine Exhibition machine Order no.: F4769, year 2024 Item number: JA_G241203 Description: Max. Max. Joint thickness 2mm Max. Edge thickness 3 mm Workpiece thickness 8 - 50 mm Min. workpiece width 80 mm Min. workpiece length 180 mm Feed rate approx. 10 m/min Ready for operation approx. 3.5 min. Interchangeable glue tray Yes PUR Yes Radius cutter R2 Radius scraper R2 / R1 Surface scraper Yes Corner rounding Yes Buffing ---- Power 400V / 50 Hz 7.4 kW Suction nozzle 140 mm Dimensions (LWH) 4050 x 1450 x 1500 mm Weight approx. 840 kg Subject to errors and changes in technical characteristics. Note: New machine: - Prices are collection prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise stated) - Subject to prior sale! - You will receive an invoice with VAT shown. - The buyer is free to inspect the items on site. Fpjliq Upevc Ddgeheg - Our general terms and conditions apply. - Special agreements are only possible by written agreement. - Any items in the background of the picture are not included in the scope of delivery. - Saw blades are for illustration purposes only and are not included in the scope of delivery. Shipping options: - We will be happy to make you a transportation offer. - Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. (Assembly and instruction of the goods for demonstration purposes is optionally possible by arrangement). - Optionally, our trained service personnel can set up the machine at your premises and give you a short briefing. Travel, travel and service times at an extra charge.

Year of construction: 2017, Condition: like new (used), I sell the edge banding machine Biesse Akron 1330A Year 2017. Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding manual adjustable / 2 glue tanks for EVA and PUR glue / vacuum storing tank for PUR glue tank Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling servomotoric adjustable Corner rounding unit 2-motor servomotoric adjustable Radius scrapers servomotoric adjustable Glue scrapers pneumatic adjustable Polishing brushes with spraying Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment servomotoric PUR glue possible 2nd set of premilling heads included in price Fpsliq Upji Hiz Hohsg Material height 10-60 mm Edge thickness 0,4-5,0 mm Feeding speed 12 m/min. Only 162.000 meters edgebanded. CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: good (used), Pre-melting Polyurethane Glue for Edgebanders - Available No. 4 Units Model MC 12, CE Foljvkpcdeiq Uphopg

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, total length: 3,600 mm, total width: 1,100 mm, edge thickness (max.): 60 mm, overall weight: 1,000 kg, input voltage: 400 V, frequency: 50 Hz, incl. joining unit up to max. 2mm chip removal, edge thickness 0.4-5mm, workpiece height 8-60mm, 11m/min feed speed, min. workpiece dimensions L=140mm W=70mm, automatic feeding of roll materials, individual feeding of strip materials, impact shears for rigid PVC/ABS up to 3mm thick, Teflon-coated glue tray with 2kg, glue application with glue roller 3x 400 V motor voltage, 50 Hz motor frequency, max. connected load 7.0 kW Joining unit with 2 slide milling cutters up to max. 2 mm chip removal Min. workpiece width: *The minimum workpiece width varies depending on workpiece length, height and surface finish: 70 mm Endless edge feed via support plate, Ø 720 mm, for PVC/ABS Automatic edge feed for edging materials 0.4-5 mm thick Impact shears for continuous edging material up to 3 mm thick in rigid PVC/ABS Glue unit Teflon-coated, 2 kg for hot-melt adhesive granulate Mechanically pre-tensioned pressure unit, 1 straight pressure roller and 2 holding pressure rollers; adjustment via dial gauge Cross-cut saw unit with HF motor, pneu. Adjustment of 0°/20° bevel cross-cuts Multifunction trimming unit, 12,000 rpm, 2x 0.55 kW, pneumatic selection for radius, flush and chamfer trimming for thin edges Radius scraper unit, mechanically switchable for R=2 mm Surface scraper unit, can be switched on mechanically Felevfnqpoiq Uphepg Polishing unit, 2 motors, Spraying device for cleaning agent in front of polishing unit Pivoting control panel with 5.7" color touch screen Color touch screen Workpiece transport via chain conveyor Pull-out workpiece support Further technical data: Workpiece length: min. 140 mm Suction connection: 2 x 80 / 1 x 120 mm Edge thickness: 0.4 - 5.0 mm Feed speed: 11 m/min Workpiece width: 70 mm Workpiece thickness: 8 - 60 mm

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, Manufacturer BARBERAN Model ECOLINE 1400 S Type of machine Laminating machine Year of manufacture 2007 Readiness dismantled / stored Technical data: Material width max mm 1300 Principle Thermal lamination Film storage Width of film max mm 1300 Material thickness min mm 3 Material thickness max mm 70 Feed rate max m/min 25 Feed rate infinite Feliq Uorur Txephepg Machining Single-sided Clamping Steel roller Vacuum Brushing machine Glue application Roller application Storage space 1 Heating device Infrared CE mark

Condition: used, Double squaring edgebander usable in line or off line as first or second machine CNI control on separate electrical cabinet Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Maximum panel width mm 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Fpolekvrxqjiq Upheg Distance between the retractable pins mm 500 Squaring part composed of (for each side): Rectifier unit with two motors Edging part made up of (for each side): Gluing unit with premelter for EVA glue Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit Staggered gleaning unit with two motors Rounding unit with 4 motors 0-90° inclinable spindle moulder unit Edge scraper group Brush group

Year of construction: 2020, Condition: like new (used), I sell the edge banding machine Biesse JADE 240 Year 2020. Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding manual adjustable Pressure zone manual adjustable End cutting saw manual adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Foliqsnxyi Ts Uphspg Glue scrapers pneumatic adjustable Polishing brushes with spraying Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, total length: 3,600 mm, total width: 1,100 mm, edge thickness (max.): 60 mm, overall weight: 1,000 kg, input voltage: 400 V, frequency: 50 Hz, Edge banding machine G 560, glue pot, scraper, polishing unit, 3x400V 50Hz CE with joining unit, edge banding machine for EVA hot melt adhesive Functional panel on the operator's side Roller support plate Teflon-coated glue container, automatic temperature reduction of the glue pot, finely adjustable glue dispenser Automat. Edge feeding for roll + strip materials Joining unit with 2 slide jointing cutters Min. workpiece width *The minimum workpiece width varies depending on workpiece length, height and surface finish: 70 mm Endless edge feed via support plate, Ø 720 mm, for PVC/ABS Automatic edge feed for edging materials 0.4-5 mm thick Impact shears for continuous edging material up to 3 mm thick in rigid PVC/ABS Glue unit Teflon-coated, 2 kg for hot-melt adhesive granulate Mechanically pre-tensioned pressure unit, 1 straight pressure roller and 2 holding pressure rollers; adjustment via dial gauge Cross-cut saw unit Multifunctional trimming unit, 12,000 rpm, 2x 0.55 kW, radius trimming, flush trimming, chamfer trimming for thin edges, Radius scraper unit, mechanically switchable for R=2 mm Control panel with LCD display and keypad Workpiece transport via chain conveyor Pull-out workpiece support Further technical data: Fpeliq Upjvfnqcjhog Workpiece length: min. 140 mm Suction connection: 2 x 80 / 1 x 120 mm Edge thickness: 0.4 - 5.0 mm Feed speed: 9 m/min Workpiece width: 70 mm Workpiece thickness: 8 - 60 mm

Condition: excellent (used), Year of construction: 2009, Year of production: 2009 Manufacturer: IMA Technical condition: good, regularly serviced. Pre-cutters: New, installed about a month ago, made of diamonds. Flat cyclers: Replaced, a better version was installed, as can be seen in the attached photos. Technical documentation: Available as a PDF file, if required. Fpslsrur Uroiq Uphog Additional information: The machine is running efficiently thanks to new pre-cutters, which were installed recently and worked for about a month. The flat cyclers have also been replaced with a better version, as can be easily identified by reviewing the attached photos. Feel free to call us for more information or to schedule a time to see the machine. Technical documentation in the form of a PDF file is also available to provide full clarity on the machine's specifications and operation.

Condition: used, Year of construction: 2004, PLC control Panel height mm 10-60 Solid mm 15 Pvc / Abs mm 3 Feed speed up to mt/min 12-18 Working height adjustable by PLC Adjustable panel support guide Side roller conveyor with idle wheels for panel support Rightening unit Roll holder plate Gluing unit for EVA glue with pre-melter Edge pressure unit End trimming unit Trimming unit with overlapping motors Tiltable chamfering unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Fslou Tyx Aeiq Uphjpg Oscillating brush unit

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Fpjlish U Nzpjq Uphjg Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, total length: 4,550 mm, edge thickness (max.): 6 mm, input voltage: 400 V, power: 1.8 kW (2.45 HP), frequency: 50 Hz, workpiece width (max.): 60 mm, Incl. 2nd glue pot Equipment: Joining unit with 2 slide milling cutters D=100 mm up to max. 3 mm chip removal, 2 motors 1.8 kW each (9,000 rpm), tool height 63 mm Endless edge feed via support plate Automatic edge feed for edging materials 0.4-5 mm thick Impact shears for continuous edging material up to 3 mm thick in rigid PVC/ABS Glue unit Teflon-coated, 1.5 kg for hot-melt adhesive granulate Mechanically pre-tensioned pressure unit, 1 straight pressure roller and 2 holding pressure rollers; adjustment via dial gauge Cross-cut saw unit with 2 HF motor, pneu. Adjustment from 0°/15° Flush trimming unit top and bottom with 2 HF motors, radius cutter included (R=2mm), 2x 0.35 kW, 2 pneumatic positions via control panel Corner rounding unit "Round 1", enables automatic rounding of PVC / ABS edges at the front and rear corners. Panel thickness 10-45 mm, min. panel thickness 280 mm Surface scraper unit, pneumatically switchable for R=2 mm Spraying device with non-stick agent in front of the joining unit Spraying device with cleaning agent in front of the surface scraper Pivoting control panel StarTouch" control unit with 12" touchscreen Pull-out workpiece support Further technical data: Feed speed: 11 m/min Workpiece length: min. 140 mm Suction connection: 4 x 80 / 2 x 48 mm Working height: 900 mm Speed: 9000 rpm Edge thickness: 0.4 - 6.0 mm Workpiece thickness: 8 - 60 mm Fsljvfnnhjiq Uphopg

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group Feliou Rim Hsq Uphjpg * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Year of construction: 2012, Condition: like new (used), I sell the edge banding machine Biesse Akron 1320 Year 2012. Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding manual adjustable Pressure zone manual adjustable Felji Urpzeiq Uphjpg End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Radius scrapers servomotoric adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-3,0 mm Feeding speed 12 m/min. Total weight 1200kg Total length 4,10m only ! CE Mark. Including full documentation. Very good condition ! Available immediately !

Condition: used, Year of construction: 2017, TECHNICAL SPECIFICATIONS General specifications for the squaring and edgebanding line MAIN FEATURES: · Automatic loading and unloading of panels in stacks; · Automatic evacuation of service panels upon loading · Automatic management of service panels / pallets upon unloading; · Possibility of manual loading/unloading of panels for special needs (e.g. revisions, urgent pieces, etc.); · Longitudinal and transversal squaring and/or edging; · Execution of blind and/or through milling in the longitudinal and/or transversal direction · Possibility of quality control with operator first panel of each batch after SQB 2; The operator must enable the 1st piece quality control mode on the SPV before processing of each batch: The supervisor commands the entry of a single panel into SQB1 + SQB2 which will stop on output belt conveyor to SQB2 for quality control by the operator. If the panel is to be discarded, the operator presses the appropriate “DISCLAIM” button and the supervisor brings in a second test panel. If the panel is good, the operator puts the panel back on the belt conveyor and launches the production with a specific button. Random quality control It will be possible to activate this function by means of a supervisor. Given a number of panels settable, one will be extracted from the quality control line, to allow the extraction will create a gap between the panels of approximately 10/12 seconds. The panel can be reintroduced into work at the end of the job by pressing the appropriate button. Provide a button for starting the edging process from the keypad on the quality control station and from keypad on SQB1 TYPES OF PANELS THAT CAN BE WORKED: · Chipboard / MDF panels; Raw panels with a density greater than 650 kg/m3, honeycomb panels with a perimeter frame of at least 30mm thickness and already squared, without protruding veneer. · Covering / edges: or melamine, CPL, HPL (no protruding coating on the incoming panels); o Matt surfaces/edges: For matt, glossy and film edges please refer to samples provided by the customer. · The panels being processed must have edges with straight sections of a minimum height compatible with Fpsliq Upeulqbmohsg the height and position of the guides and copiers of the machine working groups and line automation (no inclined sections and/or small thickness swings, etc.); · The quality of the processing of any milling operations carried out on the 2nd line is not guaranteed with intervention of a single router (possible chipping or breaking of the edges); · Straight or inclined milling must be compatible with the maximum removal, the cutting edge work and the overall dimensions of the spindle moulder groups of the squaring and edgebanding machines; · Any panels with particular characteristics (e.g. milling, slots, large notches, etc.) will have to be tested beforehand on the line to verify their possibility and quality of processing; · Other characteristics of the processes according to the specifications of the individual machines; TYPE OF EDGES AND MAIN PROCESSING CHARACTERISTICS: · Removal in squaring longitudinal/transverse (from each side): max. 500 mm2, with excess material in width from 1 to 10 mm; · Panel protrusion from the edgebanding machine track (on each side): or 1st line: electronically variable by control from 35

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Fpoliq Ueq A N Nuophsg Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20+ Working thickness adjustment servomotorical Material height 8 - 50mm Edge thickness 0,4 - 8,0 mm Feeding speed 11 m/min. Total length including feeding plate 5860mm Total weight 2660 kg Very good condition, fully working!

Condition: used, Power Control PC 22 control with WoodWop - POWERTOUCH software Panel height 8 - 60 mm Pvc/Abs mm 3 Feed speed up to 25 m/min (with rounding 20 m/min) Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Panel support guide and facilitated introduction for small panels (panel dimensions 500 x 1600 mm) Anti-adhesive group below \ above Rectifier group with two motors KW 3 each, 9000 RPM Reel magazine with 2 positions Gluing unit for PUR glue with Nordson pre-melter and glue tank Fpeliq Upothxa Nehjg Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N. HL84 trimming unit with 2 motors, KW 0.8 each, with automatic inclination adjustment BF10 overlapping trimming group with 2 motors, 1.5 KW, 12000 RPM FK 11 rounding unit with 2 multifunction motors (edger + rounder) with CN regulation PN 10 edge scraper unit Glue scraper unit Brush group Predisposition for adding automatic panel return system TECHNICAL DETAILS TO BE CHECKED

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine SCM K130, year 2009. Configuration: Edge banding EVA glue End cutting saws pneumatic adjustable 0-15° Tilting radius milling pneumatic controllable Fjlijt Ir Tpsq Uphspg Free space for further aggregates Very good condition, fully working. Including CE and full documentation.

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Fsliju N T Eweq Uphepg Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Foliqsu E E D Ds Uphspg Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20 Working thickness adjustment servomotorical Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Total weight 2600 kg 2nd additional glue tank included. With full Documentation and CE. Very good condition, fully working!