Used Hurlimann H-468 for sale (55,671)

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Blsdpewuzzrjfx Aa Ten Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 700349718, Buhler Sortex H SpectraVision sorting machine on a steel frame. Equipped with 3 sorting modules, each 300 mm wide. Chiller. Control cabinet. Year of manufacture: 2023. Serial number: 700349718. Maximum compressed air pressure: 7 bar. Bsdpfxoz H U Rxs Aa Tjln Dimensions: approximately 182x171x240 cm. Details: Brand: Buhler. Model/type designation: Sortex H SpectraVision. Color: white/grey. Configuration: machine on a steel base frame. Equipped with: inspection window, emergency stop. Configuration: upper structure with multiple hoppers; lower section with four outlets and hose/pipe connections. Condition: used.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Blsdpfx Aezgq Szea Tsn

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 030536, turning length: 2,000 mm, center width: 2,000 mm, center height: 330 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 18,500 W, The Saeilo Contur Dialog H 66/2000 is a used cycle lathe, manufactured in 2004 (first commissioning 02/2004), equipped with a Siemens Sinumerik 810D control system. With a center height of 330 mm and a distance between centers of 2,000 mm, it is designed for machining longer shafts that are produced as individual parts or in small batches. It can be operated manually or with programmed cycles. The machine is located in Düsseldorf. TECHNICAL DATA - Year of manufacture: 2004 - Control system: Siemens Sinumerik 810D - Center height: 330 mm - Distance between centers / turning length: 2,000 mm - Swing diameter over slide: 400 mm - Spindle speed max.: 2,500 rpm - Spindle drive: 18.5 kW Bjdpfx Asz H Ugaoa Tsln EQUIPMENT AND ACCESSORIES - Chip conveyor Saeilo TTM-325 (hinged belt) - Turning chuck - Turning and clamping tools - Setting tools - Operating manual Contur Dialog H 56/66/66G CONDITION During our inspection on 01.10.2026, the machine was not in operation. Therefore, we are selling it as is, without testing. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for machining shafts, spindles, and tube parts up to 2 m in length in tool and maintenance areas where many individual parts are required. LOCATION AND PROCEDURE The machine is located in Düsseldorf. Inspection by appointment only. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact details for local forwarding companies. Price upon request. Please contact us via the contact form.

Condition: used, mileage: 597,000 km, power: 335 kW (455.47 HP), first registration: 10/2006, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: semi-automatic, emission class: euro5, Equipment: soot filter, - Retarder - Air conditioning - Leaf spring suspension Bledpsz E Ugwsfx Aa Ton - Tipper, 13 m³ - Mixer, 9 m³ Suspension: Leaf spring suspension

Condition: used, functionality: fully functional, machine/vehicle number: 1941, empty load weight: 7,480 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2011, next inspection (TÜV): 10/2024, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,770 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65/22.5, color: silver, Year of construction: 2011, Equipment: ABS, H & W moving floor , Cargo Floor floor , Lift axle , Roller tarpaulin , Platform , Folding rear light protection , Moving wall with service door , German trailer Bledpfx Aeq T Iuysa Ten Sale only to traders and under exclusion of any warranty . We deliver to any GERMAN seaport .

Condition: used, Year of construction: 1989, operating hours: 10,746 h, lifting height: 4,300 mm, fuel type: gas, mast type: duplex, fork length: 1,200 mm, Year of manufacture: 1989 Empty weight: 5.810 kg Lifting capacity: 4.000 kg Mast type: duplex = Additional options and accessories = - Pneumatic shaped solids Bledez H Uv Uspfx Aa Tsn = More information = Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 1990, input frequency: 50 Hz, Equipment: double-sided, We offer this used Michael Weinig H 22 BL planer, manufactured in 1990. Bjdez H I Nbopfx Aa Tjln Type: H 22 BL Year of manufacture: 1990 Machine number: 220-1274 Voltage: V Frequency: 50 Hz Also included is a sharpening machine. If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), functionality: fully functional, clear span: 2,700 mm, total height: 10,050 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 10,000 kg, number of shelf rows: 5, overall weight: 14,500 kg, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty racking solution for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load capacity of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system on offer has a total of 648 pallet spaces, including spaces on the floor level. At a total price of €14,240.00 net, this corresponds to a price of only €21.97 net per pallet space. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Level load: 2,000 kg per level - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: Floor + 5 beam levels - Pallet spaces: 648 including floor spaces - Price per pallet space: €21.97 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 270 × Beams, approx. 360 × 12 × 5 cm - 540 × Locking pins PRICE: €14,240.00 net €16,945.60 gross Blsdpfxoz H Nccs Aa Tsn You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner logistics company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams optionally available - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, a renovation, or an extension – we will provide you with expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants will be happy to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company website. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a powerful heavy-duty racking solution for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system offered has a total of 408 pallet spaces, including spaces on the floor level. At a total price of €9,550.00 net, this corresponds to a price of only €23.41 net per pallet space. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 63.00 m - Shelf load: 2,000 kg per level - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: floor + 5 beam levels - Pallet spaces: 408, including floor spaces - Price per pallet space: €23.41 net - Condition: Used, Jungheinrich MPB DELIVERY SCOPE: - 18 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 170 × Beams, approx. 360 × 12 × 5 cm - 340 × Locking pins Bsdoz H Nb Eopfx Aa Tjln PRICE: €9,550.00 net €11,364.50 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams can be arranged - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether for new construction, renovation, or expansion – we will provide you with expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get a comprehensive picture of our pallet racking systems, storage racking systems, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us by message or phone. You can find our telephone number on our company website. ☎️ You can reach us by telephone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, Year of construction: 2017, operating hours: 13,853 h, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, power: 55 kW (74.78 HP), Year of manufacture: 2017 Empty weight: 8.470 kg Lifting capacity: 4.500 kg Number of valves: 3 CE mark: yes General condition: average Technical condition: average Visual appearance: average Mast type: triplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Free lift - Pneumatic shaped solids - Roof window = More information = Make of engine: Kubota Number of valves: 3 Fork carriage: Fork spreading Bsdpfx Aaoz H Uxpo Tsln Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. The system cooperates with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Bodpfxswpkw Ee Aa Tjln Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. .

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Bsdpfx Asy H Dbloa Tjln Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1992, Used circular saw from Kaltenbach Type: KKS 400 EC-H Capacity: ø400mm Bljdpfsz Hbhksx Aa Tsn Includes a 6-meter infeed and outfeed roller conveyor with an analog measuring system.

Condition: new, Fanuc A06B-6164-H311 # 580 Servo Amplifier Version: F SN:V12144682, unused, 100% functional, scope of delivery as per photos Bjdpsrz Dg Ssfx Aa Tsln

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 13,796 h, load capacity: 3,000 kg, lifting height: 4,950 mm, fuel type: gas, mast type: simplex, construction height: 3,110 mm, empty load weight: 4,725 kg, total length: 2,700 mm, drive type: Erdgas, construction width: 1,250 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Blodpez Ifwlofx Aa Ten Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 20 - 40% Battery year of manufacture: 2016 Double auxiliary hydraulics, fully enclosed cab with heating and air conditioning, 2 front work lights, 1 rear work light, blue spot light, gas tank.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 16,338 h, load capacity: 4,000 kg, lifting height: 3,800 mm, fuel type: electric, mast type: simplex, construction height: 2,754 mm, fork carriage width: 1,350 mm, fork length: 1,100 mm, empty load weight: 8,374 kg, total length: 3,150 mm, drive type: Elektro, construction width: 1,450 mm, Electric four-wheel forklift Load center: 600 ISO class: FEM 3 A Mast type: Standard Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/45-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 60 - 80% Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2018 Bljdpsz Ifwrsfx Aa Tjn Dual auxiliary hydraulics, dual pallet fork, cabin with heating, battery, 2 work lights at the front, 1 work light at the rear.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Bledpfxjx Hn D Dj Aa Ten Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 17,812 h, load capacity: 5,000 kg, lifting height: 3,100 mm, fuel type: diesel, mast type: simplex, construction height: 2,471 mm, fork carriage width: 1,350 mm, empty load weight: 6,675 kg, total length: 3,100 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 500 ISO class: FEM 3A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 300-15 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 60 - 80% Battery year of manufacture: 2013 Bjdpfx Ajz H E Nfea Teln Additional single hydraulic circuit, fully enclosed cabin with heater, dust protection, single-pedal operation, single-lever operation, 2 work lights at the front, 1 work light at the rear.

Condition: used, Riva Calzoni Hydromotor MR350/350/46852 250bar – removed from Ferromatik MV 200-970 Blsdpfx Ajw Ah Risa Tjn - taken from a running machine - fully functional Manufacturer: Riva Calzoni Type: MR350/350/46852 Spare part no.: 10098158

Condition: used, Year of construction: 1993, functionality: fully functional, Semi-automatic miter circular saw Bljdpfx Aaoz Dgrio Ten Manufacturer: Eisele, Model: PSU 450 H Year of manufacture: 1993 Technical data Manufacturer: Eisele Model: PSU 450 H Year of manufacture: 1993 Saw blade diameter: 450 mm Cutting diameter: 150 mm Total power consumption: 3.0 / 3.6 kW Voltage: 380 V, 50 Hz Speeds min-1: Gearbox 6 / 12 / 24 / 48 min-1 Motor: 1400 / 2800 min-1 Machine dimensions: L 1 x W 1.4 x H 1.9 m + roller conveyor Machine weight: approx. 1.5 t Equipment • Miter setting with fixed stops at 30°, 45° and 90° • Hydraulic clamping device • 2 hydraulic retraction arms • Motorized miter setting • Roller conveyor on the left: 2 m • Roller conveyor on the right with stop: 2 m • Stepless cutting speed adjustment • Coolant system All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2015, operating hours: 8,195 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,960 mm, motor manufacturer: VW, gearing type: automatic, fork length: 1,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, air conditioning, cabin, hydraulic fork positioner, lighting, pallet forks, sideshift, Technical Specifications * Manufacturer: Linde Material Handling * Model: H25D - 02 * Year of Manufacture: 2015 * Load Capacity: 2,500 kg * Operating Hours: 8,195 h * Mast: Triplex * Lifting Height: approx. 4,700 mm * Free Lift: approx. 1,600 mm * Side Shifter and Fork Positioner * Drive: Diesel * Dead Weight: 3,725 kg Equipment: * Air Conditioning * Heater * Lighting according to STVO (German Road Traffic Regulations) * Triplex Mast * Work Lights: 2 front, 2 rear * Reversing Light * Comfort Seat with Seat Heating * Hydraulic Additional Functions: 3rd and 4th Valve * CE Version Bodpfx Aoz H Tm Sja Tjln Condition * Immediately ready for operation * Recently serviced * Next service due in approximately 900 operating hours * Engine and hydraulics are functioning perfectly * Technically in good condition * Optically well-maintained Price: 16,900 EUR net, negotiable Inspection and test drive possible by arrangement. Loading and transport can be arranged. If you have any further questions, please feel free to write or call.

Condition: used, Filter housing of stainless steel for plates 600 x 600, with manual hydraulic. Size for 80 plates. 78 plates on stock. Plates maximum: 80 Plate formats: 600x600 Bodpfjz Ia Edox Aa Tjln Platefilter features: Manual spindl

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Blsdpfez H N Nvsx Aa Tjn Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 8,237 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, construction height: 2,110 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,840 kg, total length: 2,500 mm, drive type: Treibgas, construction width: 1,150 mm, Internal combustion forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: Hydrostatic Blsdpfx Asz H E Nxja Tsn Technical condition: good Front tire type: Superelastic Front tire size: 2 x 200/50-10 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 18x7-8 Rear tire condition: 0 - 20% Battery year of manufacture: 2011 Double auxiliary hydraulics, double pallet fork, partial cabin, heater, single-pedal operation, single-lever operation, PVC side paneling on the right, 2 front work lights, 2 rear work lights.