Used Cylindrical grinding machines 1100-2099mm grinding length for sale (54)

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, center height: 250 mm, grinding length: 1,500 mm, grinding wheel diameter: 610 mm, grinding diameter: 480 mm, distance between centers: 1,520 mm, 2014 CNC Cylindrical Grinder Immediately Available, Inquire for CIF Pricing Equipped With: Fanuc OiM CNC Controller SBS SB-100 Wheel Balancer Pendant Controller CNC Diamond Dresser Touch Probing Live Headstock with Center Tailstock with Center Lelhcsr I A Uijcqrshf Coolant System

Condition: used, Year of construction: 1980, Clamping length: 1.620 mm grinding length: 1.540 mm Workpiece table: max. swivel range 5° /7° Peak height: 150 mm Center point: MK4 grinding headstock: max. travel 100 mm, max. swivel range: + 30° / -45° Grinding wheel: max. diameter 500 mm, bore diameter 203.2 mm, Lelhccswdyptjqrjhf Workhead: normal speed 32 - 500 rpm workpiece weight: max. between tips 200 kg, max in feed, including feed 50 kg Total power requirement: 19 kVA equipment: lots of accessories (see pictures)

Year of construction: 1988, Condition: good (used), coolant device tail stock Technische Daten / technical details: Spitzenhöhe / center height 180 mm Spitzenweite / center to center 1200 mm max. Schleiflänge / max. grinding lenght 1000 mm max. Werkstückdurchmesser / max.workpiece diameter 355 mm Lhslhccqsnl Dp Uorof Schleifscheibenabmessungen / grinding wheel diamensions 400x50-80x127 mm Antriebsleistung / drive capacity 8 kW Gewicht der Maschine ca / weight ca 4200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, The Servogrind® RSM NC is a precision cylindrical grinding machine for long and heavy workpieces. Instead of a conventional hydraulic unit, however, the series has a modern servo motor drive for both axes, which raises the dynamics, efficiency and precision of the machine to a new level. The series is suitable for both single part and small batch production and offers additional flexibility with the internal grinding device. The solid construction with a large machine bed, ground guideways and powerful drives for the work spindle and grinding spindle has proven itself many times over. The modern NC control with touchscreen requires no programming knowledge, simplifies operation and increases productivity. Lhjlhcsu E Sk Rocqrof

Condition: excellent (used), Year of construction: 1975, The year of manufacture is estimated, but from the 70s. Partially overhauled, geometry checked (in tolerence range). TECHNICAL DATA center height 125 mm grinding diameter 250 mm grinding length 750 mm spindle power 3 kW Grinding headstock speed range 1500-2420 1/min grinding wheel dimension ø 400x50x127 mm Work headstock Speed range (infinitely variable) 25 - 450 1/min Rotatable 90 spindle cone MK 5 Tailstock Quill mount MK 3 Table feed (infinitely variable) 100 - 6000 mm/min inclination max. 10° EQUIPMENT/ACCESSORIES Lelheid Sqweccqrjhf tailstock with cross fine adjustment coolant device Splash guard 1 flange with diamond grinding wheel 2 further flanges Set-up elements

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, WORKING CAPACITY Centers distance 1500 mm Centers height 210 mm Max grinding diameter 400 mm LEFT WHEEL Wheel band thickness 60 mm Max wheel diameter 405 mm Hole diameter 127 mm WORKPIECE HEAD Taper MT4 Lholhccewc A Amoqref Rotating speed 10/300 Rpm Spindle power 1.3 kW Tilt 120° (+90/-30) ° WHEELHEAD Accuracy (B axis) +/-30 ° External spindle power 3.75 kW External spindle speed 1940 Rpm Internal spindle power 0.75 kW TABLE Cross speed 50-4000 mm/min Max workpiece weight 150 kg Tilt -3/+7 ° TAILSTOCK Taper MT4 Quill stroke 25 mm EXTRA Maintenance & Use books Yes Electrical drawings Yes CE Certification Yes Filtration unit YES Digital read out (DRO) VIEWER Machine total weight 4100 kg Floor space 6354x1620x1900 mm Open steadies 3-point rest Ø 45 – 135 mm), 3-point rest Ø130- 250 mm The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm Lolsv Svrzohccqrohf

Condition: excellent (used), Year of manufacture 1993 machining grinding length 2000mm machining diameter 500 mm Lolhewb Uldsccqrohf

Condition: repair required (used), Functionality: not functional, workpiece weight (max.): 300 kg, grinding length: 2,000 mm, Used Cylindrical grinding machine TOS BHU 32A/2000 grinding diameter 320 mm, grinding length 2,000 mm, without electrics, in need of repair, ideal for companies specializing in general overhauls. Lholhjwbiw Ijccqrjf

Condition: new, The models of the RSM C series are precision cylindrical grinding machines designed for long and heavier workpieces. The series is suitable for processing individual parts as well as for small series production and offer additional flexibility with the internal grinding device. The classic design with a large machine bed, ground guides, and powerful drives for the work spindle, grinding spindle and hydraulic unit, make these machines a cost-effective solution for the precision grinding of larger workpieces. Lslhju E N Dnsccqrjhf

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a CNC controled universal cylindrical grinding machine EMAG Weiss W 11 CNC. The machine is suitable for external-interna- face and cylindrical grinding. Ljlor Ey Huohccqrshf The W 11 CNC cylindrical grinding machine is perfect for one-offs- / prototype- and serial production. This cylindrical grinding machine is also used for sample production in the field of training and maintenance. CONTROL Eckelmann TECHNICAL DATA Workpiece length: max. 1.500 mm Center height: 200 mm | Option 320 mm Workpiece weight: 250 kg Workhead: MK 4 | Option MK5 / MK6 Tailstock: MK 4 TOOL CARRIER Single wheel straight / incliend, but also possible 2 wheels on B-axis combined with internal grinding spindle. Price, delivery time and equipment of the machine according to agreement.

Condition: used, grinding diameter 350 mm Lhslhcouwv Idecqrjf grinding length 1500 mm centre height 175 mm 500mm grinding wheel diameter New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: used, Distance between centers: 2000 mm Maximum grinding diameter: 360 mm Height at center: 180 mm Wheel diameter: 500 mm Lhjlhccov R Ufdoqrsf Wheel width: 80 mm Restear rest: Yes Internal grinding: Yes

Year of construction: 2020, Condition: as good as new (ex-display), Max. Grinding diameter: 350mm Max. rotation over table: 350 mm Max. workpiece weight: 130 kg Grinding length between centers: 1200 mm Grinding spindle speed: 1675 or 1962 rpm Manual belt change Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Travel lengthwise : 1350 mm crossways : 265 mm grinding spindle power: 5,5 kW installation area: 4,89 x 2,11 m Incl. the following standard accessories: - coolant tank 120l with 0,4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard - Hydraulic power pack - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange Dresser - Dressing holder with dressing diamond on tailstock - 2 centering points - Dial gauge for table adjustment to 0 - Machine light - 3 unscrewable hooks for transport with crane Lhslhccqjciribersf - Levelling screws with set-up plates - Machine documentation Incl. special accessories: - hydrostatic spindle - Spindle flange for hydrostatic spindle - internal grinding device - Inverter (Mitsubishi) for speed control at the working spindle - Inverter for speed control at the grinding spindle - 2 axis digital display Heidenhain ND 780

Condition: used, Year of construction: 1962, grinding diameter mit Rad 750 mm centre height 200 mm workpiece weight 1000 kg Lhjlhcjvxltzjcqrjf

Condition: used, The models of the RSM C series are precision cylindrical grinding machines designed for long and heavier workpieces. The series is suitable for processing individual parts as well as for small series production and offer additional flexibility with the internal grinding device. The classic design with a large machine bed, ground guides, and powerful drives for the work spindle, grinding spindle and hydraulic unit, make these machines a cost-effective solution for the precision grinding of larger workpieces. Lholhcceq Ih A Toqref

Condition: used, Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 119504, center height: 180 mm, workpiece weight (max.): 250 kg, grinding length: 1,750 mm, center width: 1,840 mm, grinding wheel diameter: 500 mm, grinding wheel width: 100 mm, This is a premium refurbished Schaudt PF43 from GSN. Lhjlhccev Eurtoqrof The machine is equipped with an external cylindrical grinding wheel and an internal cylindrical grinding device. The machine was last serviced in 2024. The machine is currently still in use and can be viewed under power by arrangement. It is sold with a lot of accessories: here is a small excerpt: 9x grinding wheel holders 2x three-jaw chucks 1x magnetic chuck 1x three-point steady rest 3x 2-point steady rest 3x 2-point steady rest special size for large diameters 1x additional special device for dressing 3x internal grinding spindles different speeds 1x dressing roller + diamond disks 1x coolant tank

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit Lhjlhcouxfu Njcqrof - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 1981, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min Lhslhccqevw Duzoref 130 kg cross travel max. 270 mm 130 inkl. Spannung kg 80 mm tailstock quill taper MT 3 quill travel 30 mm tailstock quill taper MT 3 total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Machine completely mechanically overhauled in 2014. Then very few hours in use. Now converted to new BEMA X control system. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Optional oriented spindle stop of the workpiece spindle possible. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my -Speed control for the grinding spindle Included: -Operating tool -clamping tube for chuck Further accessories on request. Machine has an electronically controlled infeed system in the x-axis with stepper motor drive. with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping of clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control The machine tool does not currently meet the basic safety and protection basic safety and protection requirements as specified in the BetrSichV 2015 mentioned. An increase in the required minimum protection target is to be achieved by means of a risk assessment in accordance with BetrSichV. Translated with (free version)

Condition: used, grinding diameter 350 mm grinding length 1500 mm Ljlhcot Ii Rrecqrehf centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 350 mm Lheljt Ii Rfjhccqref grinding length 1500 mm centre height 175 mm Grinding wheel left 500mm diameter Grinding wheel head fix. No swivelling possible. With new control. With new enclosure Overhauled according to Kellenberger protocoll

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und neu lackiert mit original Elektrik jedoch neuer WSS Antrieb und Regler in Drehstromtechnik. Optional mit Spritzschutztüren und bedienpult vorne siehe Foto 1000U. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Schwenkwinkelanzeige Obertisch -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Lslhod Ih Dvoccqrohf Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 2007, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Machine has been partially overhauled. Sealing and wear parts replaced. Geometry produced according to Kellenberger measuring protocol. Fanuc 18i CNC control -Automatic B-axis with Hirth gearing -Grinding disc right 500x80x203.2mm -Workpiece headstock in reinforced design -Pneumatic relief for the workpiece headstock -H tailstock (heavy - reinforced version) -Hydraulic quill retraction for the tailstock Tailstock with micro-adjustment for cylindricity correction -Dressing device mounted on the lower table -Active Marposs longitudinal positioning ‘Kel--Pos’ mounted on the Lelsvw Dunjhccqrjhf grinding head, incl. T25G curved feeler arm -Marposs grinding detection -Full enclosure of the machine -Sanding mist extraction

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm Lhjlhccjd Ih Dwsqrof bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Overhauled with geometric KELLENBERGER protocoll. Standard with: -New electric cabinet -New motor for the workpiecespindlehead -2-axis DRO Fotos of a delivered (1000U) machine with following optiones against extra charge: -protection doors -tailstock version Advance. In this case with micro-adjusting -handwheel of the version Advance More options on request: -DRO for swivel angle of workpiecespindlehead -DRO for swivel angle of grinding wheel head -Internal spindle holder with bore up to 100mm -Max center height of 225mm More KELLENBERGER machines: Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. Lhjlhccsuxftrsqrsf -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control