Used injection molding machines with a clamping force of 250 - 999 kN for sale (249)

Condition: like new (used), Year of construction: 2008, operating hours: 72,967 h, functionality: fully functional, machine/vehicle number: 208574, Equipment: documentation/manual, Here we offer the following well-maintained used injection molding machine as an injection molding machine/trading dealer. Of course, we also purchase well-maintained injection molding machines from model year 2010 onwards. We have been wholesalers of injection molding machines for over 25 years. Manufacturer: Arburg Type: 270C 400-70 Control unit: Selogica Year of manufacture: 2008 Operating hours: 75,942 h Machine number: 208574 Extras - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator valve German language - From first ownership – origin Germany Continuous maintenance by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 tons Tie bar distance: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Mold height: 200 mm min. Distance between plates max. 550 mm Ejector stroke: 125 mm Ejector force: 30 kN max Injection unit Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electric Pump: 11 KW Heating: 4 zones, 4 KW Installed power: 15 KW Circuit breaker: 50A Weight: 2150 kg. Warranty Warranty until first commissioning Loading/shipping Free loading on buyer's truck or free delivery to your door against freight reimbursement Available from our warehouse in Hannover / Germany For information about the machines we offer and our company: - We only sell our own machines, which we purchase from ongoing production from our warehouse in Hannover - All offered machines are checked and tested before removal - We do NOT sell insolvency goods - we are NOT brokers dealing in third-party property. Bledpfjwn Nr Eox Adujr - All machines offered come from successful companies where maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Screw diameter: 25 mm Bsdpfxjxl Hpgs Aduolr Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Type: Horizontal Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2001, operating hours: 70,111 h, functionality: fully functional, Manufacturer ARBURG Description 320 C 600 - 250 Serial Number 186245 Machine Type ALLROUNDER 320 C Control Version SELOGICA 3.030 Tie Bar Distance 320 x 320 mm Clamping Force 600 kN Injection Unit 1 250 Weight Bedjxt Rpyjpfx Aduelr 2,330 kg Delivery Date 27 August 2001 Description Quantity CS - Model Size II 1 0001/000 320 C 600 - 250 1 0006/030 Thermoplastics Cylinder, complete, 35 mm, highly wear-resistant 1 0060/035 SELOGICA User Interface 1 0131/002 Software Version 3.x SELOGICA 1 0131/030 Technology Level 2, servo-regulated with 2 control pumps 1 0132/003 Equipment for processing thermoplastics 1 0135/001 Open nozzle, 35 mm 1 0220/035 Nozzle tip for open nozzle 1 0300/000 Heater band for open nozzle 1 0320/000 Clamping platen set 320, central, 125 mm central diameter 1 0356/011 Sorter unit, longitudinal installation incl. connection 1 0375/000 Programmable conveyor belt in machine base, longitudinal 1 0412/002 euromap robot interface, 32-pin with plug 1 0425/000 Serial interface for printer V24 1 0454/001 OKI dot-matrix printer with serial V24 interface, incl. cable 1 0459/000 3 electric heating control circuits for mould heating 1 0469/003 Low voltage cabinet 400 x 800 1 0500/001 High voltage cabinet 800 x 800 1 0500/004 Shut-off valve for cooling water in supply line 1 1 0501/001 Machine cooling circuits regulated, material feed adjustable 1 0525/002 Software package "Additional monitoring functions" 1 0555/001 Software package "Additional machine movements" 1 0555/002 Software package "Production control" 1 0555/003 Equipment package optimisation / user assistance 1 0555/005 Software package "Quality assurance" 1 0555/006 Software package "Documentation" 1 0555/007

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm Bedpjxcw T Rofx Aduslr - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: used, Year of construction: 2005, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, load hours: 81,700 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Bsdpfxjrbqtns Aduelr Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: used, Year of construction: 2004, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 153 cm³, injection pressure: 2,174 bar, injection weight: 160 g, mold height (min.): 250 mm, ejector stroke: 100 mm, opening stroke: 450 mm, plate length: 700 mm, plate width: 700 mm, type of input current: three-phase, pressing force: 80 t, For sale: 2004 machine, fully operational, with robot. Blodpfxsxqyhyj Aduer

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm Blodpjubamvefx Aduor mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: excellent (used), Year of construction: 2002, Arburg 320S 350-150 (2002) Clamping force: 35 ton Plate size: 455x455 mm Tie bar distance: 320x320 mm Bedpfxewmqx Rs Adujlr Maximum daylight : 575 mm Screw dia: 30mm (up to 30%glass resistant)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 64,000 h, machine/vehicle number: 173960, Description Quantity CS - model size II 1 0001/000 320 C 500 - 100 1 0006/022 Thermoplastics cylinder complete, 30 mm, highly wear-resistant 1 0060/030 SELOGICA user interface 1 0131/002 Technology stage 2 manually adjustable, with 2 pumps 1 0132/012 Open nozzle, 30 mm 1 0220/030 Nozzle tip for open nozzle 1 0300/000 Heater band for open nozzle 1 0320/000 Clamping platen set 320 central, 125 mm central diameter 1 0356/011 Connection for air blow unit 1 1 0361/011 Sorter unit, longitudinal installation, incl. connection 1 0375/000 Pneumatic control core pull 1, incl. pneumatic pressure relief valve 1 0382/004 euromap robot interface, 32-pin, with plug 1 0425/000 Electrical & mechanical preparation for external robot 1 0425/002 Socket combination, 1 CEE, 1 Schuko, additional 1 0444/001 Serial interface for printer V24 1 0454/001 6 electric heating control circuits for mould heating 1 0469/006 Low voltage cabinet 400 x 800 1 0500/001 High voltage cabinet 800 x 800 1 0500/004 Machine-related cooling circuit, manually adjustable 1 0525/001 Software package "Additional monitoring functions" 1 0555/001 Software package "Additional machine movements" 1 0555/002 Software package "Production control" 1 0555/003 Equipment package: optimization / user assistance 1 0555/005 Software package "Quality assurance" 1 0555/006 Software package "Documentation" 1 0555/007 Increased power for heating units 1 990 Bodpfoxt Rimox Aduelr

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/80 Phoenix Clamping force: 80 tons Bsdexq Ti Rspfx Adujlr Year of manufacture: 2004 Screw diameter: 40 mm

Condition: used, Year of construction: 2020, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, load hours: 4,200 h, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) Bledpfx Adjv S H N Rsujr delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2007, Injection Moulding Machine Krauss Maffei KM 110-750 CX Year of manufacture: 2007 Machine Description The Krauss Maffei KM 110-750 CX injection moulding machine is a modern unit with a fully hydraulic clamping system. It is equipped with the MC5 control system featuring a color monitor, integrated control panel, and three USB ports. The machine is fitted with a complete plasticising unit designed for processing thermoplastics, with an abrasion-resistant version. The screw (diameter 45 mm) is equipped with a non-return valve and open nozzle. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 1100 Mould opening force kN 70.0 Movable platen stroke force – opening kN 35.4 Movable platen stroke force – closing kN 31.4 Platen dimensions (h × v) mm 745 × 770 Bodpfsxqzz Uox Aduslr Tie bar spacing (h × v) mm 470 × 470 Mould opening stroke mm 600 Mould height (min.) mm 300 Total daylight (max.) mm 900 Ejector stroke mm 150 Ejector force kN 22.6 / 9.9 Injection Unit Parameter Unit Value Screw diameter mm 45 Injection pressure bar 2336 Shot volume cm³ 318 Shot weight (PS) g 289 Screw speed (standard / option) rpm 265 / 355 Electrical and Hydraulic Equipment Parameter Unit Value Nominal pump motor power kW 22 Installed heater capacity kW 15.62 Number of cylinder heating zones - 5 Dry cycle time (Euromap) cycles/h 2000 Oil tank capacity l 489 Dimensions and Weight Parameter Unit Value Net weight with control cabinet t 6.2 Machine dimensions (L × W × H) m 4.9 × 1.6 × 2.1

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, machine/vehicle number: 221240, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with vertical injection equipment Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition very well maintained Extras Device for vertical injection Bedpfx Aowg Tt Reduelr 1 core pull circuit Additional heating band connection 5 free, manually controlled cooling circuits Air valve connection controlled via Selogica Equipment packages: Quality assurance, documentation, advanced monitoring, production control, etc. Flexible part chute. - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Injection unit Screw diameter 40 mm Injection weight 172 g/hp Injection pressure 1530 bar Injection volume 188 cc Clamping unit Clamping force 70 t/700 kN Tiebar spacing 370 x 370 mm Clamping platens 510 x 510 mm Mold height 200 mm Maximum spacing between platens 600 mm Ejector stroke/force 125 mm/30 kN Hydraulic clamping unit Motor power 15 KW Heating power 7.7 KW - 5 zones Total power 23 KW Warranty Warranty until the first Commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse More pictures to follow Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Blodpfouykh Dox Adusr Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 25 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 34.748

Condition: good (used), Year of construction: 2017, Type BOY 55A Pro #59638 Year of construction 2017 Operating hours ± 8,000 hours Screw diameter 38 mm Maximum injection pressure 1,508 bar Maximum shot volume 136.1 cm³ Clamping force 55 t Maximum distance between tie bars 360 x 335 mm Minimum mould height 250 mm Maximum distance between plates 650 mm Dimensions 2,700 x 1,100 x 1,700 mm (L x W x H) Weight 2,350 kg Options • Procan ALPHA (1) display • Pneumatic integrated sprue picker • 6-way electrical distribution box • Single air program ✅ Bodpfxjxa Aw As Aduelr

Condition: new, functionality: fully functional, MIKROMOLD desktop injection molding machine It was not used, NEW. It is electrically driven and suitable for individual and series production of small plastic parts. The machine requires small space. Parameters: Closing force: 30kN Piston diameter: 20mm Dose: cca15g Tool: width 75-120 mm, hight min. 80 mm, length 75-120 mm Dimensions: hight 1100 mm, width 310 mm, length 850 mm Weight: 60 kg Heating: 730W Injection molding: max. 700bar Energy demand: 230V; 50Hz Power requirements: 240V; 50Hz Materials used: General plastics + macromelt Control: card PC Machine handling: 7-inch touch screen (HMI) for data entry and status display, two-hand start and emergency button Data management: 40 program saves Material feeding: From a tank on the machine, gravity-fed The manufacturer's complete manual is available for the machine. Application areas: Due to the incredible versatility of injection molding, it can be found in almost every industry. Automotive industry - one of the largest users Cars contain many plastic parts, such as bumpers, dashboards, door panels, light housings, under-the-hood components (e.g. intake manifolds, tanks), and smaller interior components such as buttons and switches. The use of plastics contributes to reducing the weight of vehicles, which results in fuel efficiency and lower emissions. It is particularly important in the medical and pharmaceutical industries, for the production of disposable medical devices such as syringes, petri dishes, catheter connectors, drug dispensers and diagnostic test housings. Electronics industry - for the housings, connectors, buttons and other precision parts of devices, e.g. plastic housings of mobile phones, laptops, televisions and household appliances. Consumer goods and household appliances - toys (e.g. LEGO), kitchenware, furniture, sports equipment and most garden tools. Housings, handles and internal parts of household appliances such as washing machines, vacuum cleaners and coffee makers. Packaging industry - bottle caps, food containers, buckets, crates and other packaging materials Construction industry - pipe connectors, fittings, switch and socket covers, insulation elements and other profiles. PVC and PP are common in this application area, where durability, chemical resistance and ease of installation are the main considerations. Agriculture - elements of irrigation systems, machine covers, tank and other equipment parts. Corrosion resistance and durability are key here. Blsdpjxrcq Hjfx Adujr

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 106 cm³, injection pressure: 2,750 bar, overall weight: 5,000 kg, screw conveyor diameter: 30 mm, electric dosing: 15 kW electrc clamping: 9,8 kW You can find all technical data on our homepage! Payment: 100% prior to delivery Manufacturer: Demag Type: Ergotech EL EXIS S 6 Condition: technisch überarbeitet CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 350 mm Mould installation height min.: 160 mm Mould installation height max.: - Tie bar distance (h x v): 370 x 370 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: - Screw diameter: 30 mm Injection weight in polystyrol: 100 g Stroke volume: 106 cm³ Einspritzdruck: 2.750 bar CONTROL: NC4 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Bodoh Nvnwspfx Aduolr Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: - Pump drive power: 5,5 kW Total installed power: Motor + Heizung Total weight: 5.000 kg Total size L x B x H: 4,6 x 1,5 x 2,0 m

Condition: ready for operation (used), Year of construction: 2004, clamping force: 500 kN, screw diameter: 25 mm, opening stroke: 350 mm, For sale is an injection molding machine of the company Arburg and the type 320 S 500-150 The company from which this machine originates attaches great importance to maintenance. The order of the machine was terminated and no follow-up order was set, so this machine was removed from production. The pump has a slight lack of pressure but is functional Technical data: Year of construction: 2004 Clamping force: 500 kN Screw diameter: 25 mm approach force: 35 kN Opening force 120 kN opening stroke 350 mm clamping platen distance 575 mm Mold installation height 225 mm Prices plus value added tax Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Bedjkwcydopfx Aduelr Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Bjdpsxl Tz Asfx Aduolr

Condition: excellent (used), Year of construction: 2007, VICTORY 200/50 Focus CC200 controll Clamping force: 50 t Screw diameter: 30 mm Blsdexghavjpfx Aduer Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, load hours: 60,790 h, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Bljdpeh Tk Rvjfx Adujr Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Bledjxl Tzcspfx Adujr Immediately available!

Condition: good (used), Year of construction: 2000, Clamping force: 40 t Bodpfx Adoxdm Sxsuelr Screw diameter: 25 mm Shot weight: 45 g Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Platten dimensions: 446 x 446 mm Shot volume: 49 cm3 Working hours: 59.000 h Type: Uni Drive: Hydraulic

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 490 cm³, injection pressure: 2,000 bar, overall weight: 2,300 kg, load hours: 60,000 h, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Bjdpfx Aoxa Htzsduolr

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 200 cm³, injection pressure: 2,587 bar, overall weight: 2,500 kg, load hours: 45,000 h, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Bodpfx Aewi Uzheduslr terms of payment: 100% prior to delivery