Used injection molding machines with a clamping force of 0 - 249 kN for sale (39)

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: UA0374, displacement volume: 15 cm³, injection pressure: 2,025 bar, overall weight: 140 kg, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, For sale: Babyplast auxiliary injection unit, type UAI I/12, manufactured in 2021, mobile on rollers, with touchscreen control. Autonomous injection unit for mounting on an injection molding machine or on the mold (e.g., for multi-component, overmolding, or insert applications). Technical data (according to the nameplate): - Manufacturer: Cronoplast S.L., Abrera (Barcelona), Spain - Type: Babyplast UAI I/12, schema BP338, serial no. UA0374, manufactured in 2021 Gujdpfxe Akiavs Anwji - Total weight: 140 kg - Input voltage: 400 V 3L+N or 230 V 3L - Input frequency: 50/60 Hz - Rated current: 7.5 A (400 V) or 11 A (230 V) - Short-circuit current Icu: 3.5 kA Technical data (according to manufacturer's specifications Babyplast I/12): - Injection volume (displacement): 3 to 15 cm³ depending on the piston - Piston diameter: 10 to 18 mm (5 interchangeable pistons; 10 mm = max. 4 cm³, 18 mm = max. 15 cm³) - Injection pressure: approx. 815 to 2,025 bar depending on the piston - Hydraulic injection unit with piston (no screw), therefore no screw diameter specification - Mounting: directly to mold or machine, horizontally or vertically, via two standard flanges on a fixed or moving mold half - Interface to the main machine via a few potential-free contacts, operates hydraulically and electronically independently - Cooling water requirement: approx. 100 l/h - Note: The unit does not have its own clamping unit, therefore no clamping force and no tie bar spacing. Overall length and width available upon request. Equipment as shown in the photos: - Touchscreen control panel with emergency stop, key switch, main switch, and pressure display - Material hopper with conveying unit - Connection cables, hoses, and hydraulic/pneumatic connections - Operating manual (German, Rev. 10) - DGUV-V3 inspection label Used, signs of wear and tear as shown in the photos. The machine can be inspected during operation (appointment by arrangement). Disassembly and loading by the buyer; loading with a forklift is possible. Location: Erkelenz. Collection only. Sale excludes any warranty, guarantee, and right of return.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: 167988, total length: 5,360 mm, total width: 1,610 mm, total height: 1,950 mm, overall weight: 6,750 kg, Equipment: documentation/manual, Arburg 520 M - 2000 - 675 Details Guedpfx Ao Ahn Exsnwji Manufacturer: Arburg Type of machine: 520 M - 2000 - 675 Year: 1998 Delivery time: Now Terms of Delivery: Ex Works Location: Dokkum, Netherlands Control version: Multronica Screen text: German / English Operating hours: 28,000 hrs Price: On request Technical details Clamping unit Clamping force: 2,000 kN Size of mold platens (h x v): 715 mm x 715 mm Distance between tie bars (h x v): 520 mm x 520 mm Mold opening stroke: 650 mm Mold height min.: 250 mm Max daylight: 900 mm Hydraulic ejector - stroke: 225 mm Ejector force forward/backward: 65 kN Injection unit Screw diameter: 60 mm L/D ratio: 16.5 Injection pressure: 1400 bar Stroke volume: 508 ccm Shot weight, PS: 427 g Injection rate: 310 ccm/s Injection stroke: 180 mm Nozzle pressure: 60 kN Electrical and Hydraulic Equipment Nominal capacity of pump motor: 30 kW Installed heating capacity: 18 kW Adjustable barrel heating zones: 6+1 Reservoir capacity: 260 ltr. Dimensions and weights Dimensions of the machine approx.: 5.36 m x 1.61 m x 1.95 m Total machine weight: 6,600 kg

Condition: good (used), Year of construction: 2026, functionality: fully functional, Brand: Dr. Boy GmbH & Co. KG Type: BOY 20E PRO Year of manufacture: 2026 Operating hours: < 50 Godpj Ahn U Sofx Anweui Screw diameter: 22 mm Injection pressure (max.): 1732 bar Shot volume (max.): 30.4 cm³ Clamping force: 20 t Max. distance between tie bars: 254 mm Min. mould height: 200 mm Distance between platens (max.): 400 mm Dimensions: 2290 x 784 x 1673 mm Weight: 875 kg Options: • TEC package 1: wear protection & high temperature - High wear-resistant plasticizing unit (22 mm) - Ceramic high-performance heating bands - Insulation sleeves - Temperature control of the feed zone • Air ejection (1x) • Mould lighting • 4 freely programmable inputs/outputs • Oil filling (ISO-32 "EconFluid")

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 50.11.547, clamping force: 1,472 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, ejector force: 4,000 N, opening stroke: 460 mm, total length: 6,000 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 6,600 kg, number of injections: 1, power: 64 kW (87.02 HP), input voltage: 400 V, For sale is a hydraulic injection molding machine, NPM Multipower 150, manufactured in 2011. The machine is being replaced by a larger unit due to a capacity expansion. During the dismantling process, the control panel (HMI) was removed and sent in for repair. Since the machine is no longer needed, we would prefer not to invest in the cost of a repair. Gedjza D Idepfx Anwjui For this reason, the machine cannot currently be put into operation or its functionality tested. The operating hours also cannot be read at this time. The machine was mainly used in our facility for the production of plastic caps as well as sample and prototype parts. Accordingly, it was rarely operated in multi-shift mode or under high load. The removed control panel will be provided with the machine. We are not aware of the current repair status. Upon request, we will gladly provide contact information for the responsible service partner so that a potential buyer can inquire directly about repair options. The machine is explicitly sold as an untested used machine without any functional guarantee. It is particularly suitable for specialized companies with their own maintenance department, for retrofit projects, or for obtaining spare parts. Inspections are possible and expressly encouraged, by prior arrangement.

Condition: excellent (used), Year of construction: 2019, 5x Dr. Boy injection moulding machines for sale We are offering five Dr. Boy injection moulding machines from different production years and with different operating hours: BOY 35 E VV — Year 2019 — 17,968 operating hours BOY 35 E VV — Year 2013 — 18,913 operating hours With integrated hot runner temperature control unit Gjdpfxoz Drf Ie Anwjui BOY 35 E VV — Year 2010 — 18,197 operating hours BOY 35 M VV — Year 2009 — 31,617 operating hours BOY 35 E — Year 2014 — 35,099 operating hours Further information, technical specifications and additional photos can be provided upon request. All additional equipment associated with the machines is also available upon request. Interested buyers are welcome to contact us for further details or to arrange a viewing.

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Gjdpfx Anez Tiwhjwjui Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: excellent (used), Year of construction: 2020, Boy XS / Excellent technical condition Year of manufacture: 2020 Injection unit: Screw diameter: 12 mm Shot weight: 4.1 g Injection pressure: 3128 bar Dosage volume: 4.5 ccm Clamping unit: Clamping force: 10 t Tie bar spacing: 160 mm Size of mounting platens: 321x246 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 4 - Touchscreen Guodpfoz Iqk Dox Anwei Additional equipment: Machine as new Euromap 67 Robot interface Air valve x 6 Integrated side sprue picker Automatic Wittmann loader with Farratech brand dryer Optional: AMF brand clamping elements for tooling available for purchase Dimensions: Weight: 450 kg Length/Width/Height: 1.48x0.52x1.38 m All offered machines are started up by our service technicians prior to sale. A video of the technical inspections of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Gjdjz Iqfbjpfx Anwjui Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2011, SUMITOMO shi-Demag Systec 120/470-430 Closing force: 120 tons Year of manufacture: 2011 Control system: CDAIS Gujdpfx Ane Acf Rhowsi Mold opening distance: 47.5 x 47.5 Installation height: 250 mm Operating hours: 38,877 hours Screw diameter: 40 mm Injection volume: 231 cm³

Condition: excellent (used), Year of construction: 2001, Directly from mold making: ARBURG 220 S 150-30 - Year of manufacture 2001 Guodpsyl Syrsfx Anwji Approx. 46,000 operating hours, screw/cylinder d18 mm (tested), CF card reader, very compact, ideal for small parts, minimum footprint: 2.10 m x 0.80 m, can be inspected while in operation, ex works, free loading. Without peripherals: Dryer, hopper, sprue picker GEIGER MiniServo possibly available at an extra charge.

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, displacement volume: 59 cm³, total length: 3,000 mm, total width: 1,600 mm, total height: 3,480 mm, overall weight: 3,540 kg, Equipment: documentation/manual, ARBURG Allrounder 375 V 500-170 Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold opening distance: 302 mm Opening stroke: 225 mm Platen size (diameter): 900 mm Ejector force: 70 kN Centering of moving platen (diameter): 125 mm Mold weight: 230 kg Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 ccm Injection pressure: 2500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 N Number of heating zones: 5 Dimensions & Weight Machine dimensions (L x W x H): 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment Screen text in German Rotary table Hydraulic core pull (1x) Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate locking Gedez Ayhqopfx Anwoui

Condition: good (used), Year of construction: 2002, operating hours: 82,515 h, Arburg 420S-600-150 Year of manufacture: 2002 Guedpfx Ao Ag Tc Honwei Clamping force: 60 tons Tie bar spacing: 42 x 42 Screw diameter: 35 mm Injection volume: 144 cm3 Mounting height: 200-250 mm Operating hours: 82,515 Arburg robot

Condition: used, Year of construction: 2017, For Sale: Negri Bossi M70-V90 Injection Moulding Machine Manufacturer: Negri Bossi Model: M70-V90 EUROMAP Class: 900 H - 210 Year of Manufacture: 2017 Guedpfxoz Dwn Ie Anwoi Operating Hours: 10,792 hours Condition: Good working condition, available for inspection Machine Highlights - Reliable and energy-efficient injection moulding machine - Well maintained and ready for immediate operation - Suitable for a wide range of plastic injection moulding applications - Low operating hours for its age - Equipped according to EUROMAP Class 900 H - 210 specifications Technical Specifications - Manufacturer: Negri Bossi - Model: M70-V90 - Year: 2017 - Operating Hours: 10,792 - EUROMAP Class: 900 H - 210 Additional Information The machine can be inspected under power by appointment. Maintenance records and further technical details can be provided upon request. Available for immediate sale. For pricing, additional specifications, photos, or a video demonstration, please contact us. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Negri Bossi Model: M70-V90 EUROMAP Class: 900 H - 210 Year of Manufacture: 2017 Operating Hours: 10,792 hours

Condition: excellent (used), Year of construction: 2017, operating hours: 1,600 h, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Elektrisch Hersteller: DR. BOY Typ: 100E Typ: 552 Baujahr: 2017 Schließkraft: 100 Tonnen Holmabstand (hxv) 430 x 360 mm Guodpfx Aozxrc Senwei Einbauhöhe MIN. 250 mm Schnecken DN 1: 42 mm Spritzteilgewicht 1: 157,6 g/PS Schnecken DN 2: 24 mm Spritzteilgewicht 2: 39,1 g/PS Steuerung: PROCAN ALPHA Ausstattung: 1 x Kernzug Hochschleißfeste Plastifizierungseinheit Steuerung Pneumatische Nadelverschlußdüse Trockner, Hersteller: FARRAG, Baujahr: 2016

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Machine is unused and in its original packaging. Guodsz Egy Aopfx Anwoi

Condition: excellent (used), Year of construction: 1998, clamping force: 80 kN, screw diameter: 38 mm, The Boy 80T In Very Condition The Machine Done Low Hours One Owner Used In Training Centre Gjdsyhrqiopfx Anwsui

Condition: excellent (used), Year of construction: 2010, operating hours: 91,720 h, functionality: fully functional, Clamping force 150 kN Screw diameter D45 mm Max. injection volume 318 cm³ Godpfoyvt R Ijx Anweui Mounting plates 688 x 688 mm Total weight 6840 kgs

Condition: like new (used), Year of construction: 2011, operating hours: 1,342 h, functionality: fully functional, clamping force: 150 kN, screw diameter: 16 mm, displacement volume: 10 cm³, total length: 25,000 mm, total width: 860 mm, overall weight: 1,700 kg, Type: NEX15-1E Year : 2011.09 Screw size: 16mm Max opening distance: 160mm Max ejector travel: 50mm Min mold height: 130mm Max mold height: 260mm Distance between tie bars: 260*260mm Mold table size: 370*370 Mold ring size: 100mm Bulkhead volume: 10cm3 Shot weight: - Gusdjtmtnlopfx Anwji Water battery: 6 channels Core pull: - Sockets for color dosers: - Interface: Euromap 67 Hot runner control: 4 zones Electrical outlets on machine: 2 x 32amp 3phase Machine consumption: Heater 3kw, motor 7,5kw

Condition: excellent (used), Year of construction: 2012, operating hours: 43,000 h, Arburg 470-1500-400 injection molding machine, manufactured in 2012, in very good technical and visual condition, fully operational. Used for processing PP. Injection unit: Screw diameter: 40 mm Injection volume: 184 g Injection pressure: 2000 bar Clamping unit: Clamping force: 150 tons Guodsz Rkcyopfx Anwji Distance between tie bars: 470x470 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Euromap 12 Robot interface 1x hydraulic core 1x air ejector Hardened injection unit - bimetal

Condition: excellent (used), Year of construction: 2010, operating hours: 84,854 h, functionality: fully functional, Clamping force 320 kN Screw diameter D60 mm Max. injection volume 664 cm³ Mounting plates 1030 x 1030 mm Total weight 17.5 t Gsdjyvt Itjpfx Anwsui

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Gujdpfx Ajyxhaionwei Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Guodpfxextmp Nj Anwsi

Condition: good (used), Year of construction: 1999, Arburg 270 S-250-60 Year of manufacture: 1999 Gsdpfx Anozz Rx Rjwjui Screw diameter: approximately 22 mm Distance between tie bars: 27 x 27

Condition: used, Year of construction: 1999, Injection molding machine Arburg 1500 T, 2-component, year of manufacture 1999. Gjdpfx Ajz Dufqsnweui

Condition: good (used), Year of construction: 2009, Arburg parts Guodszl Tcyopfx Anwei Year of manufacture approx. 2009