Used Demag for sale (530)

Condition: used, Year of construction: 1994, operating hours: 36,170 h, machine/vehicle number: 50557900, power: 260 kW (353.50 HP), operating pressure: 9 bar, DEMAG air compressor including PARKER HIROSS air dryer! TECHNICAL DETAILS Air pressure: 9 bar Air flow rate: 28 m³/min Motor rated power: 260 kW MACHINE DETAILS Electrical voltage: 400 V Electrical frequency: 50 Hz Max. operating temperature: 65 °C Refrigerant: 407C 7.5 kg Operating hours: 36,170 h EQUIPMENT Air dryer PARKER HIROSS POLESTAR SMART Iodpfsy Iapnox Af Ueat Type: PST460 Serial number: 398037030001 Year of manufacture: 2011 Motor power: 6.26 kW Weight: 525 kg

Condition: excellent (used), load capacity: 5,000 kg, DEMAG P-hoist Iasdpfx Afoy Swb Aj Ust Load capacity 5 t Hook path 5.5 meters 2 lifting speeds: 4/0.4 m/min Electric trolley Very good condition, only used occasionally.

Condition: used, mileage: 221,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Isdpfowwqbyox Af Ueat Weights Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Dimensions of cargo space: 830 x 240 x 345 cm Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, General information Field of application: Construction Serial number: 82609 Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Iajdpfowk T Uiox Af Uot Functional Lifting capacity: 220.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Iedpowk Aw Hjfx Af Usat Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Iodpfor E Ht Hsx Af Usat Good condition

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension Iaedpfx Afohrkrto Ujt 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 Isdpfsptlbljx Af Usat with impeller for crane rail 2 pieces available, price per piece

Condition: excellent (used), DEMAG Chain Hoist Type Pk 2 N-F Lifting speeds: 10 and 2.5 m/min. Iodpoy Sldlsfx Af Ueat 380 Volt 0.5 kW Travel drive: 380 Volt 0.5 kW

Condition: used, Year of construction: 2000, Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing system Utilities: Compressed air, electrical supply Scope of Delivery Depalletizing crane system | DEMAG | Manual layer depalletizing with air-cushion gripping system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot fill Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Feed tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger based heating system Carton erecting system | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton forming unit Carton sealing system | BORTOLIN |  Hot melt carton sealing Glue system | Nordson | Series 3400 | Hot melt unit Conveyor systems | Various transport conveyors Iodpey Rmfbjfx Af Usat

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn Iodsx D Hnmspfx Af Uoat • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Iaodpoy Smkmsfx Af Uot Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of manufacture: 2009 Injection unit: Screw diameter: 35 mm Shot weight: 128 g Injection pressure: 1466 bar Metering volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle Control system: NC5 - Touchscreen Additional equipment: Electric machine: high-speed, energy-efficient, and very quiet Euromap 67 Robot interface Air valve x 4 Control with hot runners Hardened injection unit - bimetallic Central lubrication It is possible to change the screw diameter Dimensions: Weight: 4,750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started and tested by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Isdpfey Smkgex Af Uoat Price: On request

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Iasdpfx Afey Smive Ust Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Isdpfxsy Sl Ano Af Ujat 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1,877 bar Dose volume: 1,212 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1,040x1,060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Iodpjy Sl Ahjfx Af Ujat Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runner x 5 Injection unit hardened - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 robot Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travels: X-1,200, Y-2,400, Z-4,000 Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Isdpfxsy Slzwe Af Ueat Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Iaedpfx Afey N R U Rs Uet Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute 1x Euromap 12/67 conversion 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Iaedpfxjy N R Uqo Af Ust Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190

Condition: used, Year of construction: 2014, (1) Injection molding machine, Handling: Sepro Robotique | Success 22 | 2016 Temperature control: GWK Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, 1x Conveyor Unit, manufacturer Somos FG 204; year of manufacture 2022 Technical details: Clamping force (kN): 2100 Tie bar distance (mm): 580 Injection unit: 430 Power supply: 3/400 V Frequency (Hz): 50 Current 1 (A): 175 Current 2 (A): 116 Current 3 (A): 59 Weight (t): 8.93 Pressure (bar): 190 Isdpfjy N R R Eox Af Ueat

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Wittmann | W621 | 2003 Temperature control: HB Therm | HB-100 Z1 | 2013 Miscellaneous: 1x Protective Enclosure 1x Conveyor belt 1x Hot Runner Controller, Mold Masters 1x Conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 189 Current 2 (A): 152 Current 3 (A): 37 Weight (t): 10.1 Pressure (bar): 190 Flow rate (l/min): 206 Iaedpfxoy N R Iqe Af Uot

Condition: excellent (used), DEMAG Chain Hoist Model PK 5 Load Capacity 1000 kg Lifting Height 4 meters Lifting Speed 7.5 meters/min. Overall Length 700 mm 380 Volt Isdpfey I Ulkex Af Uoat 1.4 kW Year of Manufacture 1967 Condition is very good, only occasionally used. Can be tested on site. Transport Dimensions: Length 700 mm Width 400 mm Height 320 mm Weight 60 kg

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Ijdpfx Aoy N D E Asf Usat Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: ready for operation (used), Year of construction: 2002, clamping force: 4,200 kN, screw diameter: 70 mm, Hydraulic injection moulding machine manufactured in 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mold height of 1530 mm. It has a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG 420/810 - 2300 machine we have for sale. Contact us for further details. • Tie bar spacing (W × H): 810 × 710 mm • Magnetic clamping: No • Min. platen size (W × H): 380 • Min. mold height: 820 mm • Max. mold height: 1530 mm • Max. distance between platens: 1530 • Max. weight of moving mold half: 2200 kg • Centering ring diameter/height: 160 × 15 • Sprue bushing radius: R19 • Ejector coupling thread diameter: M24 • Shot volume: 1090 cm³ • Hot runners: 8 • Cascades air (number): 6 • Cascades hydraulics (number): 6 • Hydraulic core pulls: 2 • Capacity oil fillings: 730 • Power supply: 217 A • Power input: 127.5 kW Additional equipment • Robot: Demag, year of manufacture 2002 Iasdpfsy Nyflsx Af Uot

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: Ijdpfx Afjyg Eu So Ujat 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment