Used Machines with a clamping force of 1000 - 4999 kN for sale (448)

Auction

12

Ends in

 d  Hrs  Min  Sec Auction ended

Injection molding machine

FERROMATIK MILACRON Magna T Servo 275

€40,000

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: DS901DA010011, Functionality: fully functional, On offer here is a system for the production of injection molded parts including various automation (articulated arm robot) for the further assembly of threaded bushes and screws. HIGHLIGHTS Ejector Position-dependent ramps for accurate changeover and precise speed and pressure control Highly sensitive mold locking with repeat cycles Injection stages, time or path switchable Aluminum checker plate under screw cylinder nozzle Automatic temperature reduction after reaching a certain number of cycles Energy-saving servo motor with quiet gear pump TECHNICAL DETAILS Clamping force: more than 110 t (robust double toggle lever) Injection unit: mounted on linear guides from injection unit 450 and larger Screw diameter: 50 mm Hydraulic core pull: 2-fold Screw diameter: 3 per injection unit to choose from Injection speed: 6 stages Injection pressure: 15 stages Screw speed: 5 stages Holding pressure: 5 levels Control unit: ENDURA touch Programs: Semi-Auto Purge, Cold Slug removal & Intrusion Moulding Programs Mold insertion height adjustment: automatic Positioning: Linear position measuring system Central lubrication: automatic Biivfdncr3u Tool locking: adjustable 2 pressure levels & 1 speed level Feed speed: adjustable in 2 stages Screw retraction: before and after plasticizing Screw speed control: digital setpoint input and actual value display Ejector: Vibratory ejector - strokes adjustable from 1 to 9 Ejector connection thread: M 16 Intermediate ejector stop: possible Dwell time: adjustable in front and rear position Hopper emptying device: available Unit lift: via time function Nozzle contact force: via pressure switch Temperature control: available Oil preheating cycle: available Oil level monitoring: acoustic Oil filter monitoring: acoustic Continuous oil filtration: 10 µm filter MACHINE DETAILS Operating voltage: 400 V AC, 50 Hz Peak current: 62.4 A Weight: 14680 kg Cooling water battery: with 10 control circuits Socket pack: B-3 SCHUKO sockets: 3x 230V 16A CeKon socket: 3x 400V 16A Tool heating control points: 12 pieces; type FMI according to EUROMAP 14; power 15A per control point; separate HAN 16 plugs for power and sensors OTHER Thermoplastic design Alarm display in the event of heating tape or temperature sensor faults Screw start-up safety device Temperature monitoring with tolerance band Display of temperature setpoint and actual values in bar chart Ergonomic distribution of hydraulic components for easy access Hydraulic valves positioned close to the consumer for fast response times Ejector or core pull can be moved parallel to the closing movement via separate pump

more

Listing

Request more images Request more images Already requested

12

United Kingdom

6,838 km

Injection moulding machines

Arburg Allrounder 570H 2000-800

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2016, Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 2000 kn Isrn9gm This Arburg Allrounder 570H 2000-800 injection moulding machine was built in the year 2016 in Germany. The machine has a clamping force of 2000 kN and a screw diameter of 50 mm. Application Types Injection Moulding

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Groissiat

7,894 km

Injection machine ENGEL VC330-110T

ENGEL VC330/110

€12,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Year of construction: 2005, Injection molding machine ENGEL VC330 -110T Reference: VC 330 /110 Clamping force: 110 T Year: 2005 Number of working hours: 32,659 h Screw diameter: 30 mm L/D: 23.6 Maximum injectable volume: 113 cm3 Injection pressure: 2180 bar Overall platen dimensions : 740 x 470 mm Mold thickness: mini: 300 mm Dbuhgmjok Weight: 7300 kg Dimensions: 4.36m x 1.48m x 2.04m + with 1 Sepro Robot and 1 conveyor belt

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

8

Ireland

6,686 km

injection moulding machine

Krauss-Maffei KM 300-1000-CX ClassiX

Price info Price info Already requested Call

clamping force: 3,000 N, Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 300-1000-CX Plastic Injection Machine Clamp force : 300T S/N : 6109734 YOM : 2013 Robot C9zkrpy

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Bellignat

7,894 km

injection molding machine

SANDRETTO S9485/2650

Price info Price info Already requested Call

clamping force: 485 N, screw diameter: 80 mm, injection pressure: 1,500 bar, overall weight: 21,000 kg, total length: 8,710 cm, total width: 2,140 cm, displacement volume: 1,768 cm³, installation height: 2,550 mm, ejector stroke: 305 mm, clearance between the columns: 740 mm, plate width: 740 mm, plate length: 740 mm, mold height (min.): 250 mm, type of control: ecran tactile, opening stroke: 830 mm, Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, INJECTION MOULDING MACHINE IN VERY GOOD CONDITION. Bilpo7bevoj

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Straßenhaus

7,741 km

Injection molding machine up to 5000 KN

ARBURG 570 C 2000-800 Golden Edition (22.700 h)

Price info Price info Already requested Call

Condition: used, Year of construction: 2007, screw size:55 mm injection shot weight in Polysterol:434 g/PS closing pressure:2000 kN daylight:570 x 570 mm opening stroke:max. 650 mm mould height - Max./min.:300 mm control:Selogica daylight between platens - max.:950 mm weight of the machine ca.:8,5 t CG version - GOLDEN EDITION Gr9bi23hr - control Selogica direct - hydraulic plant with 2 regulating pumps - highly wear resistant plastification unit - connection for mould blow unit 1 - connection for mould blow unit 2 - core pull - interface for robot according to EUROMAP 67 - interface for printer - compact flash interface for data storage - authorization with chip card according to EUROMAP 65 - 6 electrical heating circuits for mould heating - interface for colouring device - 4 free cooling circuits manual adjustable - 1 machine-related cooling ciruciut manual adjustable - Arburg equipment packages No.: 1,2,3,5,6,7 This machine will be overhauled according to fixed criteria and can be tested in our company. This machine can be inspected at every time.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Hannover

7,752 km

injection molding machine

Engel E-Motion EM 740 /180 T aus Reinraum

€29,000

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: like new (used), Year of construction: 2012, Here we offer a well-maintained injection moulding machine. from Clean Room Manufacturer: Engel Type: EM 740/180 T Control: CC 200 Year of construction: 2012 permanently maintained /from clean room Special features/extras: - full maintenance from Engel - last owner: German medical products producer - screen language Deutsch /Englisch - 16 internal control loops Tool heating - screws Ø 50 mm - Basic package cleanroom - Robot interface EM67 Injection side Screw diameter: 50 mm Stroke volume: 392 ccm Spray weight: 360 gr/PS Injection pressure: 2000 bar Closing side Clamping force: 1800 kN /180 tons tie bar dimension : 520 x 520 mm Platen size h: 760 mm Platen size v: 760 mm Installation height min.: 250 mm - 600 mm Plate spacing max.: 1060 Opening stroke: 460 mm Ejector stroke: 130 mm Ejector force: 37 kN - available now in our warehouse in Hanover free on truck or free to your door against freight refund - Function tested (guaranteed function until first commissioning) - Machine can be inspected under power from now Blhliobd7u

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

United Kingdom

6,838 km

Injection moulding machines

Arburg Allrounder 520 A 1500-400

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand Arburg Injection Unit Screw diameter 40 and 15 mm Clamping Unit Clamping force 1500 kn Gh7h3jvpn7 This Arburg Allrounder 520 A 1500-400 Twin Shot Plastic Injection Moulder machine was made in the year 2012 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 1500 kN and a screw diameter of 40 and 15 mm. Application Types Injection Moulding

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Groissiat

7,894 km

ENGEL ES1800/250HL - 250T

ENGEL ES1800/250HL

€12,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Year of construction: 1999, Year: 1999 Number of working hours:: 73,655 h Screw diameter: 60 mm Maximum shot volume: 763 cm3 Max Injection pressure: 1969 bars Overall platen dimensions : 1150 x 900 mm Mavidd23vt Mold thickness (mini/maxi): 350 mm x 850 mm Dimensions: 6.92 m x 2.08 m x 2.14 m + 1 SEPRO Robot

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

7

Łódź

8,309 km

Injection molding machine

Tederic D130 mit dem Angußpicker Sepro

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2018, Tederic D130 with the Sepro Industrial Robot 55 sprue picker / Hybrid machine / Operating hours: approx. 9,500 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 42 mm Injection weight: 246 g Maz3fwc2xj Injection pressure: 1900 bar Metering volume: 270 ccm Clamping unit : Clamping force: 130 t Distance between tie bars: 420x420 mm Size of the clamping platens: 620x620 mm Ejector: electric Clamping unit: toggle lever Control system: KEBA - touch screen Additional equipment: Perfect technical condition, machine like new Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 9,500 h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter Central lubrication Parallel movements Sprue picker Sepro Industrial Robot 55 Year of construction: 2019 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 4400 kg Length/width/height: 4.68x1.34x1.90 m Drive: Pumps/motor: 20 kW Heating output: 12 kW Total output: 32 kW

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Straßenhaus

7,741 km

Injection molding machine up to 1000 KN

ARBURG 420 C 1000-290 Golden Edition

Price info Price info Already requested Call

Condition: used, Year of construction: 2008, screw size:35 mm injection shot weight in Polysterol:132 g/PS closing pressure:1000 kN daylight:420 x 420 mm opening stroke:500 mm mould height - Max./min.:250 mm Cqmltgvp control:Selogica daylight between platens - max.:750 mm total power requirement:23,9 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:4,30 x1,65 x 2,00 m version Golden Edition CG version III - LCD colour screen - with Selogica control direct - highly wear resistant plastification unit - hydraulic plant with 2 with regulating pumps - connection for mould blow unit 1 - connecton for mould blow unit 2 - core pull 1 - core pull 2 - interface for robot according to EUROMAP 67 - interface for printer - Compact Flash interface for data storage - operator authorization with chipcard according to EUROMAP 65 - 1 addtional heating circuit for nozzle - 6 electr. heating circuits for mould heating - 4 free cooling circuits manual adjustable - Arburg equipment packages No.: 1,2,3,5,6,7 This machine will be overhauled accoding to our checklist. This machine can be inspected and tested in our company after overhauling.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Spain

7,597 km

Injection moulding machines

Battenfeld HM 400/5100

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2008, Clamping Unit Clamping force 4000 kn This Battenfeld HM 400/5100 Injection moulding machine was made in the year 2008. The machine has a clamping force of 4000 kN. Application Types Injection Moulding Oilq8zr

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Groissiat

7,894 km

ENGEL ES1800/250HL - 250T

ENGEL ES1800/250HL

€10,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Year of construction: 1999, Year: 1999 Number of working hours:: 73,655 h Screw diameter: 60 mm Maximum shot volume: 763 cm3 Max Injection pressure: 1969 bars Overall platen dimensions : 1150 x 900 mm 2nweh27q Mold thickness (mini/maxi): 350 mm x 850 mm Dimensions: 6.92 m x 2.08 m x 2.14 m + 1 SEPRO Robot

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

Łódź

8,309 km

Injection molding machine

Arburg 1500T 3200-1300 e²

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Bioia0qycng Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Germany

7,870 km

Injection moulding machines

Krauss Maffei KM 200-1400CM

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2008, Operating hours: 62,832 h, General Data Machine weight 11500 kg Control Unit Glmr7hpp7 Brand Krauss Maffei Model MC5 Clamping Unit Clamping force 2000 kN This Krauss Maffei KM 200-1400CM Injection moulding machine was made in 2008 and has 62832 production hours. It is equipped with a Krauss Maffei MC5 control unit. The machine has a clamping force of 2000 kN. Application Types Injection Moulding

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Łódź

8,309 km

Injection molding machine

Arburg 630S 2500-1300

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2003, Arburg 630S 2500-1300 with robot Wittmann W832 Year of manufacture: 2003 injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 250 t tie bar distance: 630x630 mm size of clamping platens: 900x900 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: High speed machine Euromap 12 Robot interface Hydraulic core pull x 2 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valves on injection units - precise spraying Parallel movements Automatic mold height adjustment Cyspzljvd Machine with 2 x cylinders / battery with compressed nitrogen (additional charge for fast work) Robot - Wittmann W832 Year of manufacture: 2013 4-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A travels in axes: X-900, Y-1600, Z-3000 Touch control panel The safety package for robots Robot with adapter, protective housing Dimensions: Weight: 13500 kg Length/width/height: 6.36x2.10x2.47 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

Sweden

7,676 km

Injection moulding machines

Engel ES 750 H330W / 250 HL-2F

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2002, Operating hours: 64,882 h, General Data Machine weight 21000 kg Clamping Unit Clamping force 2500 kn This Engel ES 750 H330W / 250 HL-2F Injection moulding machine was built in the year 2002 and has 64882 production hours. The machine has a clamping force of 2500 kN. Cjykq70lom Application Types Injection Moulding

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Łódź

8,309 km

Injection molding machine

Arburg 520C 2000-675 / Hybridmaschine

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2003, Arburg 520C 2000-675 / Hybrid machine Year of manufacture: 2003 injection unit: Screw diameter: 55 mm injection weight: 390 g Injection pressure: 1720 bar Metering volume: 427 ccm Clamping unit: Clamping force: 200 t tie bar distance: 520x520 mm size of clamping platens: 728x728 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Hybrid machine: high speed, energy saving and very quiet. Euromap 12 Bioh99woie7 Robot interface Air valve x 2 Hydraulic core pull - needle x 2 (controlled by proportional valves) Control with hot runners x 12 injection unit hardened - bimetal Main machine motor - servo motor driven with inverter -energy saving Kistler sensor - mold pressure control Built-in conveyor belt Dimensions: Weight: 6630 kg Length/width/height: 5.35x1.93x2.22 m Propulsion: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Łódź

8,309 km

Injection molding machine

Arburg 570E 2000-800

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2021, Arburg 570E 2000-800 with the Sepro Industrial Robot 65 sprue picker / Electric machine / Operating hours: approx. 3,500 h in automatic mode Year of construction: 2021 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit : Clamping force: 200 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - touch screen Additional equipment: U8udnl9m0 Perfect technical condition, machine like new Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 3,500 h in automatic mode Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 2 Air core on the side of the fixed plate x 2 Pneumatic nozzle closing valve x 2 Hardened injection unit - bimetal Central lubrication Parallel movements Sprue picker Sepro Industrial Robot 65 Year of construction: 2021 Purchase of the sprue picker for an additional charge It is possible to buy the machine with another robot It is possible to buy a raw material feeding system of the Moretto brand for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 8990 kg Length/width/height: 5.95x1.82x2.25 m Drive: Pumps/motor: 0 kW Heating output: 0 kW Total output: 0 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Łódź

8,309 km

Injection molding machine

Arburg 570C 2000-150/60 / 2K-Maschine

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-150/60 / 2K machine Year of manufacture: 2003 Mayejrufer injection unit: Screw diameter: 35 mm injection weight: 97 g Injection pressure: 1620 bar Metering volume: 106 ccm Clamping unit : clamping force: 200 t tie bar distance: 570x570 mm size of clamping platens: 795x795 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 2 Control with hot runners x 12 Injection unit hardened - bimetal Screw diameter in vertical injection unit: fi 18 mm Machine with 1 cylinder/battery with compressed nitrogen (additional charge for fast work) There is a possibility to install a turntable in the machine - for an extra charge Dimensions: Weight: 8000 kg length/width/height: 0x0x0 m Drive: Pumps/motor: 30 kW Heating power: 9,4 + 3,2 kW Total power: 42,6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Łódź

8,309 km

Injection molding machine

Arburg 570S 1600-400

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2018, Arburg 570S 1600-400 / Production line with the Arburg Multilift Select robot and conveyor belt / Operating hours: approx. 17,500 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 ccm Clamping unit : Clamping force: 160 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Bgshwamo Control system: SELOGICA - touch screen Additional equipment: Perfect technical condition Operating hours: approx. 17,500 h in automatic mode Euromap 67 Robot interface Control unit with air valve x 5 Hydraulic core pull x 2 Air core on the side of the fixed plate x 2 Air core on the moving platen side x 2 Pneumatic nozzle closing valve x 2 Control unit with hot runners x 18 Hardened injection unit - bimetal Robot Arburg Multilift Select Year of construction: 07.2018 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic, movement A Travel paths in axes: X-600, Y-800, Z-1400 Touch control panel The safety package for robots Robot with adapter, protective housing and conveyor belt Purchase of the robot and conveyor belt for an additional charge It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 8280 kg Length/width/height: 5.13x1.78x2.25 m Drive: Pumps/motor: 0 kW Heating output: 0 kW Total output: 0 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Łódź

8,309 km

Injection molding machine

Arburg 470C 1500-675

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Injection pressure: 1440 bar Metering volume: 508 ccm Clamping unit: clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Core pull control Injection unit hardened - bimetal Parallel movements Dimensions: Weight: 4660 kg Length/width/height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW Bioh8bdxk3i All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Łódź

8,309 km

Injection molding machine

Arburg 470C 1500-800

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2021, Arburg 470C 1500-800 with the Sepro Industrial Robot 65 sprue picker Year of construction: 2021 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit : Clamping force: 150 t Distance between tie bars: 470x470 mm Size of the clamping platens: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Perfect technical condition, machine like new Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Pneumatic core pull x 2 Bioh7gjnqt9 Pneumatic nozzle closing valve x 2 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 65 Year of construction: 2021 Purchase of the sprue picker for an additional charge It is possible to buy the machine with another robot It is possible to buy a raw material feeding system of the Moretto brand for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 5270 kg Length/width/height: 4.90x1.59x2.09 m Drive: Pump/motor: 0 kW Heating output: 0 kW Total output: 0 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Łódź

8,309 km

Injection molding machine

Arburg 470C 1500-400

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2006, Arburg 470C 1500-400 with robot Wittmann W721 Year of manufacture: 12.2006 Injection unit: Screw diameter: 40 mm injection weight: 184 g Injection pressure: 2000 bar Metering volume: 201 ccm Clamping unit: clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of manufacture: 2006 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions: Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW U8rkalh23 All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Łódź

8,309 km

Injection molding machine

Arburg 470C 1500-150/150 / 2K-Maschine

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of manufacture: 2005 injection unit: screw diameter: 25 mm injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Gxaa02e Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Total power: 48,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

Łódź

8,309 km

Injection molding machine

Arburg 520S 1300-800

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 50 mm injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Bb0h8ls2 Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Łódź

8,309 km

Injection molding machine

Arburg 420C 1300-675

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW Biohzscc80y All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Łódź

8,309 km

Injection molding machine

Arburg 470S 1300-350

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit: clamping force: 130 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Dm8bcp Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Łódź

8,309 km

Injection molding machine

Arburg 470S 1300-350

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Biohyojv20m Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Łódź

8,309 km

Injection molding machine

Arburg 420C 1000-290

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2010, Arburg 420C 1000-290 with the Wittmann W811 robot Year of construction: 06/2010 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar D7tadkg Metering volume: 144 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 2 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-420, Y-1000, Z-1500 Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 3630 kg Length/width/height: 4.14x1.63x2.07 m Drive: Pump/motor: 15 kW Heating output: 6.4 kW Total output: 21.4 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Łódź

8,309 km

Injection molding machine

Arburg 420C 1000-250

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2007, Arburg 420C 1000-250 / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : clamping force: 100 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Very good technical condition Machine has produced molded parts for the medical industry - clean production conditions Euromap 12 Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal The machine was regularly serviced by the authorized Arburg service Purchase of the machine in 2008 Dimensions Weight: 3660 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pump/motor: 18.5 kW Heating output: 6.5 kW Total output: 25 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request Biohxtpmbsd

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Łódź

8,309 km

Injection molding machine

Arburg 420C 1000-290

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2007, Arburg 420C 1000-290 with the sprue picker Geiger MiniServo 0.5 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Biohvu3vejo injection weight: 172 g Injection pressure: 1530 bar Metering volume: 188 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic control: SELOGICA - touch screen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection Built-in sorting flap It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Dimensions: Weight: 3740 kg Length/width/height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating power: 6,4 kW Total power: 21,4 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Łódź

8,309 km

Injection molding machine

Arburg 420C 1000-350

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1000-350 / Very good technical condition Year of manufacture: 2002 injection unit: Screw diameter: 40 mm injection weight: 153 g injection pressure: 2120 bar Metering volume: 182 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 10 Injection unit hardened - bimetal The machine is integrated with the original conveyor belt of the Arburg brand Built-in sorting flap Dimensions: Weight: 3430 kg Length/width/height: 4.35x1.64x2.08 m Cyhkfilrl Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

13

Łódź

8,309 km

Injection molding machine

Engel Insert 80V/80V/100 2F

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany U8i7zjbjc Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW Price: On request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Łódź

8,309 km

Injection molding machine

Engel e-motion 310/100

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2007, Engel e-motion 310/100 / Electric machine / Production line with Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 0x0 mm Size of the clamping platens: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touch screen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot interface Control system with air valve Hydraulic core pull x 1 Control system with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Central lubrication The machine was regularly serviced by the authorized Engel service department Engel ERC 13/1-F robot Year of construction: 2007 4-axis robot: 3 axes are driven by servo motors (electric) Touch control panel The safety package for robots Robot with adapter Original protective housing Purchase of the robot for an additional charge 2mttciw Dimensions Weight: 9300 kg Length/width/height: 5.23x1.65x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

Łódź

8,309 km

Injection molding machine

Engel Victory 330/110 Tech

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / production line with robot Engel ER-HLI 41 and conveyor belt / machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm injection weight: 190 g Injection pressure: 1670 bar Metering volume: 201 ccm Huzwnik Clamping unit: clamping force: 110 t tie bar distance: 0x0 mm size of clamping platens: 790x680 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated robot Engel ER-HLI 41 and conveyor belt. Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal Machine serviced by authorized service Engel Machine with original protective housing to the robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating power: 9,2 kW Total power: 27,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Łódź

8,309 km

Injection molding machine

Engel Victory 330/120 Tech

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2010, Engel Victory 330/120 Tech / Production line with the Engel Viper 12 robot Year of construction: 2010 Injection unit: Screw diameter: 35 mm Injection weight: approx. 140 g Injection pressure: 1595 bar Metering volume: 154 ccm Clamping unit: Clamping force: 120 t Distance between tie bars: 0x0 mm Size of the clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners x 9 Hardened injection unit - bimetal Main machine motor - servomotor driven by inverter Proportional valve on the injection unit - precise injection The machine was regularly serviced by the authorized Engel service department Delivery of the machine to the customer in 2011 Engel Viper 12 robot Year of construction: 2010 4-axis, high-speed robot: 3 axes are driven by servo motors (electric) Touch control panel Biohsavksqh The safety package for robots Robot with adapter Original protective housing Purchase of the robot for an additional charge Dimensions Weight: 6700 kg Length/width/height: 4.95x1.60x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Łódź

8,309 km

Injection molding machine

Engel Victory 200H/60W/180 combi

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2015, Engel Victory 200H/60W/180 combi / production line with robot Engel Viper 20 Year of manufacture: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Injection pressure: 2392 bar Metering volume: 61 ccm Clamping unit: Clamping force: 180 t tie bar distance: 0x0 mm Zoa3fab size of clamping platens: 1020x980 mm ejector: hydraulic clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot. tie-bar-less machine, hybrid: energy-saving, high-speed and very silent Operating hours: approx. 20.000 h in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced injection units - bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Kistler sensor - mold pressure control Parallel movements The machine has an additional servo motor to drive the mold Outputs / inputs for peripheral devices Robot Engel Viper 20 Year of manufacture: 2015 High-speed robot, 5-axes: X, Y, Z, A, C axes are driven by servo motors (electric) Robot is integrated with the machine and has the additional control panel The safety package for robots Robot with adapter and protective housing Dimensions: Weight: 13200 kg Length/width/height: 5.86x1.98x2.51 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Łódź

8,309 km

Injection molding machine

Battenfeld TM 100/525

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Automatic mold height adjustment Dimensions: Maxwkqqpp2 Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Total power: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Łódź

8,309 km

Injection molding machine

Wittmann Battenfeld Smart Power 120/525

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2017, Wittmann Battenfeld Smart Power 120/525 / Hybrid machine / Operating hours: approx. 20,000 in automatic mode. Year of manufacture:2017 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 120 t tie bar distance: 520x470 mm size of clamping platens: 750x750 mm ejector: hydraulic clamping unit: hydraulic Control: UNILOG B8 - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 20.000 in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit is wear resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter -energy saving Proportional valve on the injection unit -precise injection There is a possibility to purchase the machine with robot or manipulator Dm8a9v Dimensions: Weight: 4600 kg Length/width/height: 4.42x1.49x2.11 m Drive: Pumps/motor: 18.5 kW Heating power: 14 kW Total power: 32,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Łódź

8,309 km

Injection molding machine

Wittmann Battenfeld Smart Power 120/525

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2016, Wittmann Battenfeld Smart Power 120/525 / Hybrid machine / Operating hours: approx. 20,000 in automatic mode. Year of manufacture: 2016 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 120 t tie bar distance: 520x470 mm size of clamping platens: 750x750 mm ejector: hydraulic clamping unit: hydraulic Control: UNILOG B6 - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 20.000 in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit is wear resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter -energy saving Proportional valve on the injection unit -precise injection There is a possibility to purchase the machine with robot or manipulator Dimensions: Weight: 4600 kg Length/width/height: 4.56x1.49x2.16 m Drive: Cybxlg3pp Pumps/motor: 18.5 kW Heating power: 14 kW Total power: 32,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Łódź

8,309 km

Injection molding machine

Battenfeld BA 1300V/315 V-R

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 1300V/315 V-R / Vertical injection molding machine with rotary table Year of construction: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Clamping unit: Biohphij09j Clamping force: 130 t Distance between tie bars: 454x740 mm Size of the clamping platens: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/width/height: 3.83x2.33x4.16 m Drive: Pump/motor: 18.5 kW Heating output: 8.98 kW Total output: 27.48 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Łódź

8,309 km

Injection molding machine

Wittmann Battenfeld TM 1600/750

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 1999, Battenfeld TM 1600/750 Year of manufacture: 1999 injection unit: Screw diameter: 45 mm injection weight: 326 g Injection pressure: 2116 bar Metering volume: 358 ccm Clamping unit : clamping force: 160 t tie bar distance : 520x520 mm size of clamping platens: 750x750 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: It is possible to install Euromap interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Central lubrication Dimensions: Weight: 6000 kg Length/width/height: 5.05x1.51x2.09 m Drive: Pumps/motor: 22 kW Heating power: 13,8 kW Total power: 35,8 kW All offered machines are started by our service technicians before sale. Wut2npd It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Łódź

8,309 km

Injection molding machine

Wittmann Battenfeld VM 200/525H R1520 Servo Power

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2013, Wittmann Battenfeld VM 200/525H R1520 Servo Power / Hybrid machine with one turntable Year of construction: 2013 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 200 t Size of the clamping platens: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 in automatic mode Biohomoaaxa Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control unit with hot runners Hardened injection unit - bimetal Turntable diameter: 1520 mm Main machine motor - servo motor driven by inverter Horizontal injection unit with automatic injection height adjustment The machine can work with a second vertical injection unit Holder for automatic mold clamping Proportional valve on the injection unit - precise injection Parallel movements Infrared safety curtains The machine has been serviced by the authorized Wittmann Battenfeld service department Dimensions Weight: 12200 kg Length/width/height: 2.17x1.70x2.17 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Łódź

8,309 km

Injection molding machine

Battenfeld TM 2700/1900

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2002, Battenfeld TM 2700/1900 Year of manufacture: 2002 injection unit: Screw diameter: 65 mm injection weight: 981 g injection pressure: 1777 bar Metering volume: 1078 ccm Clamping unit : clamping force: 270 t tie bar distance : 630x630 mm size of clamping platens: 940x940 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B4 Additional equipment: Euromap Robot interface Air valve x 2 Dm8a8x Hydraulic core pull x 8 Injection unit is wear resistant and resistant to corrosion Proportional valve on the injection unit - precise injection Central lubrication Automatic mold height adjustment Parallel movements Dimensions: Weight: 11800 kg Length/width/height: 7.08x1.70x2.20 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Łódź

8,309 km

Injection molding machine

Battenfeld HM 300/2250S

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2007, Battenfeld HM 300/2250S with robot Wittmann W818 / machine in very good technical condition / operating hours: approx. 40.000 h in automatic mode year of construction: 2007 injection unit: Screw diameter: 55 mm injection weight: 702.5 g Injection pressure: 2500 bar Metering volume: 772 ccm Biohnivs7wu Clamping unit : clamping force: 300 t tie bar distance: 710x630 mm size of clamping platens: 1030x1020 mm Ejector: hydraulic clamping unit: hydraulic Control: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear resistant and resistant to corrosion Proportional valve on the injection unit - precise injection In the machine is installed new original screw and cylinder Robot Wittmann W818 4-axis, high-speed robot: 3 axes are driven by servo motors (electric); movement A and C Touch control panel Robot with adapter, protective housing Dimensions: Weight: 13000 kg Length/width/height: 6.90x1.90x2.40 m Drive: Pumps/motor: 45 kW Heating power: 22,7 kW Total power: 67,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Łódź

8,309 km

Injection molding machine

Wittmann Battenfeld EcoPower 300/750

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2012, Wittmann Battenfeld EcoPower 300/750 / Electric machine / Production line with Wittmann W821 robot and conveyor belt. Year of manufacture: 2012 Injection unit: Screw diameter: 45 mm Injection weight: 326 g Injection pressure: 2116 bar Metering volume: 358 ccm Clamping unit: Clamping force: 300 t tie bar distance: 770x720 mm size of clamping platens: 1250x1110 mm ejector: electric clamping unit: toggle lever control: UNILOG B6S - touch screen Additional equipment: Cx878ge8r Production line with robot Wittmann W821 and conveyor belt Electric machine: high speed, energy saving and very quiet Perfect technical condition Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Control unit with hot runners x 12 Injection unit hardened - bimetal Automatic mold height adjustment It is possible to change the screw diameter for fi 35, 40, 50 mm Robot Wittmann W821 Year of manufacture: 2012 4-axis robot: 3 axes are driven by servo motors (electric); axis C Touch control panel The safety package for robots Robot with adapter, protective housing, conveyor belt Purchase of the robot for an additional charge Dimensions: Weight: 12500 kg Length/width/height: 7.59x1.84x2.47 m Propulsion: Pumps/motor: 0 kW Heating power: 13,9 kW Total power: 0 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

Łódź

8,309 km

Injection molding machine

Battenfeld EcoPower SE 300/1330

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2012, Battenfeld EcoPower SE 300/1330 / Electric machine Year of manufacture: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Injection pressure: 2470 bar Metering volume: 540 ccm Clamping unit: Clamping force: 300 t T2g0v8f tie bar distance: 770x720 mm size of clamping platens: 1090x1170 mm ejector: electric clamping unit: toggle lever control: UNILOG B6 - touch screen Additional equipment: electric machine: high speed, energy saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valve x 8 Control unit with hot runners x6 Injection unit hardened - bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/width/height: 7.20x2.04x2.20m Propulsion: Pumps/motor: 0 kW Heating power: 22 kW Total power: 0 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Łódź

8,309 km

Injection molding machine

Krauss Maffei KM 110-700 C2

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection unit: Screw diameter: 45 mm Injection weight: 278 g injection pressure: 2336 bar Metering volume: 305 ccm Clamping unit: clamping force: 110 t tie bar distance: 470x470 mm size of clamping platens: 745x770 mm ejector: hydraulic clamping unit: hydraulic Maxqxwpan9 Control system: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Parallel movements Proportional valve on the injection unit - precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine has been regularly serviced by the authorized service Krauss Maffei in Switzerland Dimensions: Weight: 6200 kg Length/width/height: 4.66x1.51x2.19 m Propulsion: Pumps/motor: 18.5 kW Heating power: 16 kW Total power: 34,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

Łódź

8,309 km

Injection molding machine

Krauss Maffei KM 160-750 PX

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2021, Krauss Maffei KM 160-750 PX with Sepro Industrial Robot S5 / Electric machine / Operating hours: 2,923 h in automatic mode Year of manufacture: 2021 Injection unit: Screw diameter: 50 mm Injection weight: 357 g Injection pressure: 1892 bar Metering volume: 393 ccm Clamping unit: Clamping force: 160 t tie bar distance: 585x535 mm size of clamping platens: 790x740 mm ejector: electric clamping unit: toggle lever control: MC VI - touch screen Additional equipment: Perfect technical condition, machine like new Electric machine: high speed, energy saving and very silent Operating hours: 2.923 h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Dm8a7z Injection unit hardened - bimetal Parallel movements Central lubrication Automatic mold height adjustment Outputs / Inputs for peripheral devices Robot - Sepro Industrial Robot S5 Year of manufacture: 2017 3-axis robot: 3 axes are driven by servo motors (electric) Touch control panel Low number of operating hours Robot with adapter Purchase of the robot for an additional charge Dimensions: Weight: 10300 kg Length/width/height: 6.10x1.72x1.95 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Save search query