Used CNC turning and milling centers for sale (664)

Condition: good (used), Year of construction: 2002, operating hours: 18,000 h, CNC MULTITASKING LATHE MORI SEI MOD. MT 2000 SZ Main Spindle Kw 22 6,000 RPM X/y/z/b Travels: 565 - +/- 80 - 1077 - +/- 120° Cgebsu Sg Auo Enan Aot Milling Head Capto C6 6,000 RPM Motorized Lower Turret 12 Stations Tool Magazine 40 Posts Year 2002

Condition: used, Year of construction: 2003, Functionality: fully functional, TECHNICAL DETAILS Control unit name OKUMA OSP-E100L turning diameter: 550 mm turning length: 1440 mm b-axis: 0.001 ° Tool magazine: 44 places Spindle speed: 6,000 rpm Tool holder: HSK63 MACHINE DETAILS Cgsb Enjtmp Imoan Ajt Total power requirement: kW Machine weight: approx. 12.5 t Transport dimensions LxWxH: 5.10 x 2.90 x 2.80 m

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, turning length: 1,050 mm, turning diameter: 550 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, bar passage: 102 mm, bar diameter: 91 mm, Equipment: documentation/manual, TECHNICAL DETAILS Control: FANUC 21-T Speed: 30 - 3,000 rpm turning diameter: 550 mm turning length: 1,050 mm Bar passage: 160 mm Chuck diameter: 305 mm Swing diameter over bed: 700 mm Swing diameter over support: 480 mm Spindle clearance: 102 mm Spindle nose: A2-8 Rapid traverse speed X-axis: 16,000 m/min Rapid traverse speed Z-axis: 20,000 m/min Traverse path X-axis: 362 mm Z-axis travel: 1,105 mm Max. Bar diameter: 91 mm Number of tool stations: 12 EQUIPMENT Cgjb Enajufyykjn Ast - Chip conveyor - Tools / holders

Condition: excellent (used), Year of construction: 2006, turning length: 705 mm, turning diameter over cross slide: 400 mm, turning diameter: 500 mm, spindle motor power: 18 W, Machine details Stock-No. 1105-03951 Type of machine CNC Lathe Make MORI SEIKI Type NL 2500 /700 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Technical details turning diameter 356 mm Cjb Enaneqlccws Aegt turning length 705 mm control MSX-850 II MAPPS x-axis 260 mm z-axis 795 mm power capacity - main spindle 18,5/15 kW Speed main spindle 3300 min/-1 spindle bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3,1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm turret change time 0.25 sec. rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27.6 kW weight of the machine approx. 5,8 t dimensions of the machine approx. 3.1 x 2 x 2.2 m Accessories Documents Chip conveyor Coolant system Signal-Light Additional information Mori Seiki NL 2500 /700 cnc lathe with c axis and live tools with tailstock + 3jaw chuck chip convoyer

Condition: ready for operation (used), Year of construction: 1990, operating hours: 19,782 h, Functionality: fully functional, machine/vehicle number: 80 763, turning length: 350 mm, turning diameter over cross slide: 190 mm, turning diameter: 350 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,300 rpm, spindle bore: 55 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, overall weight: 3,200 kg, spindle diameter: 80 mm, center height over cross slide: 220 mm, power: 23 kW (31.27 HP), Equipment: documentation/manual, rotational speed infinitely variable, Boley BDN 160 R-ZB Sinumerik 3TT basic version 4C Two-spindle CNC lathe with C-axis machining Main and counter spindle (6300/3000 /min) Space for 16 tools Driven tools Coolant lubrication Parts ejection onto conveyor belt Various tool holders Manual/documentation Boley tool holder Special design for 0°, 90°, 180° tool measuring range Size: VDI 20 Setting gauge according to VDI 3425 sheet 2 Ø 20mm for checking the adapter zero point Bar feeder from IRCO Ceb Enansrvg Rde Asgt IRCO electric feed with oil flow and integrated material slides Material pusher Ø 7, 11, 15, 19, 22, 26, 30, 34, 38, 42 For 3 m bar stock Tool presetter from KOMEG TH 320 Measuring range: X-axis Ø 230 mm Z-axis length 310 mm Transmitted light projector With integrated focusing Projector screen Ø 150 mm Magnification 20:1 Control KOMEG System metama type T1000 Machine can be inspected under power Removal must be organized by buyer, assistance will be provided. Conditions should be inspected beforehand, pictures can be provided if required. Please submit a price

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 75.0008, turning length: 145 mm, turning diameter: 16 mm, spindle speed (max.): 15,000 rpm, travel distance X-axis: 320 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 145 mm, Turn-mill center for highest precision: Benzinger DoLittle B3 - very good condition! TECHNICAL DETAILS turning diameter: 16 mm turning length: 145 mm Cgsb Enasual Nasn Aot Control: Sinumerik 828 D Spindle speed: 15,000 rpm Number of pick-up stations: 16 Axes: X / Y / Z1 / Z2 / C1 / C2 / B Traverse path X1 axis: 320 mm Z1 axis travel: 145 mm Z2 axis travel: 90 mm Y-axis travel: 80 mm C-axis: main & counter spindle NC axis: swiveling Rapid traverse speeds: 30 m/min Accuracy: ± 5 µm Tool magazine: BENZINGER linear tool carrier system Tools swiveling NC axis: 6 pieces, driven Tool stations main spindle: 10 tools + 1 stop (2 blocks each 5 tools + 1 stop) Counter spindle tool stations: 11 tools (2 blocks, 5 and 6 tools) MACHINE DETAILS Total power requirement: 15 kW Machine weight: approx. 2.6 t Space requirement: approx. 2.1 x 1.1 x 1.9 m + Irco ILS Operating hours: 0.5 to 1 shift Loading magazine: ILS-MUK 7012 Breuninger Irco (built in 2012) High-pressure pump: Knoll EQUIPMENT - Knoll high-pressure pump - Hydra cooling system - Suction duct - Tool holder, collets - 10 tool blocks

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 196633, turning diameter: 279 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 8 mm, travel distance Z-axis: 13 mm, rapid traverse X-axis: 1,181 m/min, rapid traverse Z-axis: 1,299 m/min, type of input current: three-phase, total height: 1,650 mm, total length: 1,670 mm, total width: 1,660 mm, spindle nose: A2-5/ 2.4''/ 1.625'', overall weight: 3,330 kg, Collet Chuck Ceb Enanjvvtv So Aogt Parts Catcher Automatic Tool Eye Tailstock Complete Coolant System w/ Tank & Pump RS 232 Port Interface 3.5" Floppy Disk Drive Multi-Tap Transformer All Available Manuals

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: M237304, Axis:XYZC (8-axis) Ø 100 x 100mm Bar Feeder:Ø52 Tool:BMT-55 Control:Fanuc 18 i-TB Dimensions: 3900x4600x2200mm Sale incl. STANGENLADER - Profimat IRCO Breuning (Year: 2001, Serial number: 10000592, Dimensions:1200x4000mm, Ø 52 - 3000mm) Csb Eettm Tzenan Ajgt

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 30LM0113, turning length: 1,050 mm, turning diameter: 550 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, bar passage: 160 mm, Equipment: documentation/manual, TECHNICAL DETAILS Control: FANUC 18-T Cobsufyxts Enan Ajgt Speed: 30 - 3,000 rpm Bar capacity: 160 mm Chuck diameter: 305 mm Swing diameter over bed: 700 mm Swing diameter over support: 480 mm Turning diameter: 550 mm Turning length: 1,050 mm Spindle clearance: 102 mm Spindle bore: 125 mm Spindle nose: A2-8 Spindle power: 16 kW Rapid traverse speed X-axis: 16,000 m/min Rapid traverse speed Z-axis: 20,000 m/min Traverse path - X: 362 mm Traverse path - Z: 1,105 mm Bar diameter: max. 91 mm Quill Morse taper: MT 6 Number of tool stations: 12 pieces

Condition: excellent (used), Year of construction: 1997, Maschinen-Details Lagernummer 1105-03756 Maschinenart CNC Dreh- und Fräszentrum Fabrikat TRAUB Typ TNA 300 Cgjb Enasip D Utsn Aot Baujahr 1996 Steuerungsart CNC Steuerung Traub TX 8H Lagerort Lager Ursprungsland Deutschland Lieferzeit nach Absprache Frachtbasis EXW Technische Details Drehlänge 450 mm Steuerung Traub TX 8F Drehdurchmesser über dem Planschlitten 275 mm Drehdurchmesser über Bett 400 mm Drehzahlbereich 4000 U/min Anzahl der Werkzeuge 12 St. Schlittenweg Plan 210 mm Schlittenweg längs 450 mm Pinolendurchmesser 75 mm Pinolenhub 125 mm Gesamtleistungsbedarf 22 kW Maschinengewicht ca. 3.2 t Raumbedarf ca. 3 x 2,00 x 2,10 m Zusatzinformationen 3 AXIS MACHINE WITH LIVE TOOLS inkl. Späneförderer 12-fach Werkzeugrevolver SAUTER mit 12-fach Werkzeugrevolver VDI 30 MIT 4 ANGETRIEBENEWERKZEUGHALTER UND C ACHSE Schlepp-Reitstock mit Pinole Dreibackenkraftspannfutter Zustand SUPER

Condition: good (used), Year of construction: 2006, Sliding headstock automatic lathe GILDEMEISTER Speed 20-11 linear, no. 2701-0127, year 2006, control DMG MORI FANUC 160I, chip conveyor, together with bar loader IEMCA Boss 332 E, type 32 L, no. 020643NA09, year 2006 Cob Enajunv Iqen Aegt 2 identical machines available

Condition: ready for operation (used), Year of construction: 2014, operating hours: 9,298 h, Functionality: limited functionality, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 750 mm, Tools in the pictures are included in the scope of delivery! Spindle condition: Spindle makes quiet noises and should therefore be replaced soon. The life expectancy of the spindle confirms this. The clamping ring on the milling spindle is defective. The spindle is jammed, but sporadically no longer loosens. When the error is acknowledged, it continues to run. Production is therefore still possible. TECHNICAL DETAILS (data according to manufacturer's brochure) Turning diameter: 500 mm Workpiece length machinable: 800 mm Center distance: 1,020 mm Travel X / Y / Z: 480 / 200 / 750 mm B-axis: ±110° Milling spindle speed: 12,000 rpm Tool holder: HSK-A63 Drive power: 40% ED: 22 kW Torque: 120 Nm Tool positions: 80 positions Tool diameter (free/occupied neighboring position): 120 / 80 mm Tool length: 300 mm Cgeb Enaeum U Dzsn Ast Tool weight: 12 kg Chip-to-chip time: 8.5 s Main spindle speed: 5,000 rpm Indexing: 0.001° Drive power: 40% ED: 34 kW Torque: 380 Nm Spindle diameter in front bearing: 130 mm Chuck diameter: 315 mm Counter spindle speed: 6,000 rpm Indexing: 0.001° Drive power: 40% ED: 27 kW Torque: 170 Nm Spindle diameter in front bearing: 100 mm Chuck diameter: 210 mm Tailstock Stroke: 800 mm Force: 8.0 kN MACHINE DETAILS Dimensions: 4,957 x 2,910 x 2,300 mm Machine weight: 10,000 kg Switch-on time: 21,178 h Spindle time: 9,298 h

Condition: good (used), Year of construction: 1999, operating hours: 140,810 h, Functionality: fully functional, Gildemeister MF SPRINT 65 Machine no.: 07810000801 Control system: SINUMERIK 840 C Year of construction: 1999 Operating hours: 140810 Irco ILS short bar loader Annual maintenance by DMG, last maintenance 08.07.2024: Linear guide, axial bearing, KGT and adjusting nut of the X1 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the Z1 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the X2 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the Z2 axis replaced. Replacement of all sliding plate wipers. Safety window of the work area door replaced. Replacement of all feed toothed belts and the toothed belts for the counter spindle drive Tool drive 1 dismantled, disassembled, cleaned and re-stored. Filter mat of the main spindle fan replaced, coolant valves of turret 1 and 2 replaced. Chuck of the main spindle and counter spindle dismantled and cleaned. Machine geometry and working area remeasured and adjusted. Hydraulic filter cartridges replaced. Pneumatic filter replaced. Technical data see appendix Machine can be inspected under power Price 35.000 € VHB The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. . Delivery ex works excluding packaging and insurance, unless otherwise agreed. Ceb Eeu Dg Ubenan Aegt The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 02260001501, turning length: 600 mm, turning diameter over cross slide: 324 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 635 mm, indexing of C-axis: 0.025 °, TECHNICAL DETAILS Control system: SIEMENS Max. circulation diameter: 680 mm Circulation diameter via X-guide: 565 mm Max. turning diameter: 324 mm Max. turning length: 600 mm Main spindle Spindle head diameter (flat flange): 170h5 mm Max. bar diameter: 65 mm Spindle diameter (front bearing): 120 mm Spindle bore: 79 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 5,000 rpm Torque S1, 100% ED: 270 Nm Buckling speed: 900 rpm C-axis (main spindle) Speed: 250 rpm Holding torque: 200 Nm Pitch accuracy: 0.025° Counter spindle Spindle head diameter (flat flange): 140h5 mm Max. bar diameter: 42 mm Spindle diameter (front bearing): 90 mm Spindle bore: 57 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 7,000 rpm Torque S1, 100% ED: 160 Nm Buckling speed: 1,500 rpm C-axis (counter spindle) Speed: 250 rpm Holding torque: 120 Nm Pitch accuracy: 0.025° Cross slide (X/Y/Z) Face travel (X): 185 mm Longitudinal travel (Z): 635 mm Vertical travel (Y): +40 mm Rapid traverse speed (X/Y/Z): 60/15/45 m/min Feed force (X/Y/Z): 3.5/7/7 kN Ball screw (Y): 40x5 mm Ball screw (Z): 40x15 mm Counter spindle (Z2) Longitudinal travel: 666 mm Input speed: 45 m/min Ball screw: 40x15 mm Tool carrier Driven tools: 12 Shank diameter (VDI 69880): 40 mm Max. power: 9.4 kW Torque: 20 Nm Cgob Enju T Hmmean Aet Speed range: up to max. 4,500 rpm MACHINE DETAILS hydraulic system Capacity: 10 l Pump output: 2.2 kW Max. pressure: 80 bar Clamping device and tailstock pressure: 10-60 bar Coolant device Capacity: 210 l Pump capacity: 1.7 kW Delivery rate (at 6 bar): 20 l/min Electrical power requirement Connected load: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuse protection: 80 A Voltage fluctuation: +6%/-10% Bar loader Manufacturer: Breuning Notes - The tools shown in the turret are not part of the auction. - The collets for the collet chuck are included.

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, turning length: 1,050 mm, turning diameter: 500 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, bar passage: 102 mm, TECHNICAL DETAILS Control: FANUC 18-T Speed: 30 - 3,000 rpm Cgjboufyd Nj Enan Aot turning diameter: 500 mm turning length: 1,050 mm Bar passage: 160 mm Chuck diameter: 305 mm Swing diameter over bed: 700 mm Swing diameter over support: 480 mm Spindle clearance: 102 mm Spindle nose: A2-8 Rapid traverse speed X-axis: 16,000 m/min Rapid traverse speed Z-axis: 20,000 m/min Traverse path - X: 362 mm Traverse path - Z: 1105 mm Bar diameter: max. 91 mm Number of tool stations: 12 pieces EQUIPMENT - Chip conveyor - Tools / holders

Condition: excellent (used), Year of construction: 2015, operating hours: 13,782 h, Functionality: fully functional, bar diameter: 52 mm, controller manufacturer: FANUC, controller model: 32i-B5, number of slots in tool magazine: 24, Biglia B 446 T2 in very good condition and with extensive equipment Delivery / removal: in week 35 or week 39 or by arrangement Known defect: The milling drive on the upper turret 1 must be re-mounted and adjusted. The measuring probe, swiveling, with two heads for tool measurement (turret top and bottom), must be sporadically supported manually when swiveling out. However, the function is available. No other defects are known. TECHNICAL DETAILS CNC control: FANUC 32i-B5 Main and counter spindles: 2 C-axes, 2 Y-axes and 2 turrets with 12 driven stations each Main spindle: A5' 15 kW Counter spindle: A5' 1 kW Bar capacity: 52 mm Control: Fanuc 31i B-5 Counter spindle: lowerable Y-axis: +50 / -40 mm, 4-fold guided X-axis guide: flat guide Turret: 2 pieces with 12 driven tool positions each Torque: 47 Nm Parts catcher: controlled, can be used for main and counter spindle Finished parts indexing conveyor: transfer to storage conveyor 800 x 300 mm MACHINE DETAILS Machine dimensions: approx. 4550 x 2150 x 225 mm Machine weight: approx. 7400 kg Bar loading magazine: LNS Quick Load SERVO 80 S2 (year 2015_QL SSO S2) Short bar loader: Quick Load Servo 80 Bar length 900 mm / 6-65 / 80 mm Feeding ramp 600 mm Shifting device: transverse/longitudinal (can also be changed later) Ram: 6 - 12 - 20 mm V-extension: 150 mm / 120° / protective cover Loading magazine dimensions: approx. 2200 x 1000 x 1700 mm Loading magazine weight: approx. 800 kg HP high-pressure system: approx. 30 - 40 bar, coolant emulsion / coolant fine filter cartridge Dimensions peripherals & accessories: approx. 1900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg Dimensions peripherals & accessories: approx. 1900 x 700 x 800 mm Weight of peripherals & accessories: approx. 300 kg Chip conveyor dimensions: approx. 4100 x 2100 x 1300 mm Weight of peripherals & accessories: approx. 800 kg EQUIPMENT - Hinged belt chip conveyor with ejection height 820 mm - 2 coolant pumps 7 bar incl. filter - Foot switch for chuck actuation on the main spindle - Interior flushing with 4 bar pump - Measuring probe, can be swiveled in, with 2 heads for tool measurement - High-pressure coolant pump 40 bar 20 l/min incl. coolant filter 90 um - Manual - Dialog programming turning/milling cycles, - 3D simulation, manual (on CD) - SBS tool breakage/wear monitoring - HAINBUCH SPANNTOP AXFIX 52-A6 NOVA offset, length 150 mm, - Three-jaw wedge bar chuck 165/45 / A5 SMW HFKN-D 165-3 1/16 - Various tool holders Cgeb Enanjuglwws Aet - 4 High-precision boring bar holders - Reduction sleeve - Rotating material stop - 2 ER25 drilling and milling head with IKZ, i1:1, straight - 2 ER25 drilling and milling head with IKZ, i1:1, angled - Foot switch for counter spindle, for opening and closing the clamping device - Air cleaner, mechanical AR VF - 5-stage for emulsion mist/smoke There is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring equipment, measuring machines, cooling medium etc. in high quality at a favorable price due to the discontinuation of the trade. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.

Condition: good (used), Year of construction: 1995, Automatic lathe INDEX G200, no. 510268, year 1995, control SIEMENS Sinumerik with filter system and bar feeder IEMCA TAL/Auto 65/32, no. 88071908 Cebsunwiie Enan Ajgt

Condition: excellent (used), Year of construction: 2008, Type: CNC Lathe - horizontal Manufacturer: Tsugami Type: M50SYE-III Year of manufacture: approx. 2008 Control: Fanuc 18i-TB Serial number: 5078 Hours: Control on: 94,600 h / Automatic time: 59,000 h / Feed time: 17,600 h Accessories: Standard, jaw chuck, chip conveyor, driven and rigid holders, documentation Machine condition: very good Control system: Fanuc 18i-TB Number of simultaneous axes: 5 (C, X, Z, Y, & A) Number of simultaneous axes according to export control: 4 (X, Z, Y & C) Linear axes: 3 (X, Z & Y) Rotary axes: 1 (C) Parallel axes: 1 (A) Accuracy / repeatability X, Z & Y: 0.03 / 0.02 mm X-axis travel: 170 [mm] Z-axis travel: 400 [mm] Travel distance A-axis: 520 [mm] Y-axis travel: +/- 50 [mm] Diameter of the spindle passage: 51 [mm] Cgsbovccxis Enan Ast Max. spindle speed: 6000 [rpm] Indexing accuracy C-axis: 0.001 [°] Spindle power: 7.5 / 11 [kW] Max. Counter spindle speed: 6000 [rpm] Indexing accuracy C-axis counter spindle: 0.001 [°] Counter spindle power: 7.5 / 11 [kW] [kW] Number of turret stations: 12 (all driven) Accessories: Standard, chip conveyor with pump, collet chuck counter spindle, large holder package incl. driven holders & documentation

Condition: good (used), Year of construction: 2003, operating hours: 44,534 h, Functionality: fully functional, turning length: 450 mm, turning diameter: 65 mm, spindle speed (max.): 5,600 rpm, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Control unit: Traub TX 8F Cob Ensulw D Uean Aogt Turning length: max. 450 mm Machining diameter: max. 65 mm Bar diameter: 65 mm Spindle data Spindle speed: max. 5,600 rpm Spindle motor: 18.5 kW Number of spindles: 2 Tool data Number of tool stations on the turret head: 14x VDI30 Maximum speed of the turning tools: 8,000 rpm Drive of the turning tools 100% / 15%: 1.5 / 4 kW MACHINE DETAILS Dimensions: 3,450 x 2,400 x 2,100 mm Weight: 4,800 kg Switch-on hours: 44,533 h EQUIPMENT - Breuning IRCO ILS RBK 10012 bar loading magazine - Parts collection system with belt conveyor - Chip preparation with KNOLL belt filter system - Chip conveyor - HAINBUCH collets - Tool holder (rigid and driven) - Documentation

Condition: used, Year of construction: 2004, operating hours: 11,022 h, Functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a cooling water treatment and a proper tool selection HSK 63 - A. The machine is being sold due to lack of orders. 49700 switch-on hours, 11022 spindle hours. Machine can be inspected and tested at any time. Loading possible without problems. Cgsb Ejug Uc Nenan Ajt

Condition: repair required (used), Year of construction: 2000, goood....5461546 Cobjunp Drs Enan Aegt

Condition: excellent (used), Year of construction: 2017, operating hours: 39,047 h, Functionality: fully functional, turning length: 560 mm, turning diameter: 220 mm, bar diameter: 52 mm, controller manufacturer: FANUC, controller model: 32i-B5, number of slots in tool magazine: 12, BIGLIA B 545YS CNC turning center with Fanuc 32i - B control, C-axis on main and counter spindle, Y-axis, 12 driven tool stations and CNC-controlled counter spindle Delivery / removal: in week 35 or week 39 or by arrangement TECHNICAL DETAILS CNC control: FANUC 32i-B5 Main and counter spindle: 2 C-axes, 1 Y-axis and 1 turret with 12 driven stations each Main spindle: A5' 15 kW Counter spindle: A5' 11 kW Bar capacity: 52 mm Spindle bores: 59.5 mm Rotation diameter over bed: 580 mm Max. Turning diameter: 220 mm Turning length: 560 mm Control: Fanuc 31i B-5 Y-axis: 105 mm X-axis with flat guide: 173 mm Z-axis: 560 mm Turret: 1 piece with 12 driven tool stations each 12 driven tool stations 2 C-axes MACHINE DETAILS Machine dimensions: approx. 4300 x 2000 x 2200 [mm] Machine weight: approx. 5050 [kg] Loading magazine dimensions: approx. 2200 x 1000 x 1700 [mm] Weight of loading magazine: approx. 800 [kg] Dimensions peripherals & accessories: approx. 1900 x 700 x 800 [mm] Weight of peripherals & accessories: approx. 300 [kg] Chip conveyor dimensions: approx. 4100 x 2100 x 1300 [mm] Weight of chip conveyor: approx. 800 [kg] Workpiece unloading system: with tray for removing the finished parts and transferring them to container or conveyor belt Max. part length: 150 mm Hinged belt chip conveyor: with ejection height 820 mm Interior rinsing with pump: 4 bar Flushing gun for cleaning the work area Work area light splash-proof Handwheel: electronic Control cabinet: air-conditioned Flat screen: 10.4" LCD Central lubrication: automatic Color: light grey/anthracite RAL 7035/7016 EQUIPMENT - Measuring probe, swiveling, with 1 head for tool measurement - MANUAL GUDIE , dialog programming turning/milling cycles, 3-D simulation, manual (on CD) - SBS tool breakage/wear monitoring system - HAINBUCH SPANNTOP AXFIX 52-A6 NOVA offset, length 150mm - Three-jaw wedge bar chuck 165/45 / A5 SMW HFKN-D 165-3 1/16 (still to be tested) - Bar feeder LNS Quick Load SERVO 80 S2 (year 2017_QLS 8O S2) - Short bar loader Quick Load Servo 80 Bar length 900mm / ®6-65/80mm Feeding ramp 600mm - Transverse/longitudinal shifting device - HD high pressure system approx. 30-40bar High pressure pump for coolant emulsion - Coolant fine filter cartridge, supplies turret - Hinged belt conveyor - Various tool holders - Flat and external turning holder, 20 x 20 mm Cjb Enet N Sm Sjan Aegt - Rotating holder - Axial turning holder - Cut-off and turning holders - Face / turning holder, recessed - High-precision boring bar holder - Reduction sleeve - Rotating material stop - ER25 drilling and milling head with IKZ, i1:1, radial - Drilling and milling head ER25 with IKZ, i1:1, axial, increased to 100mm - Drilling and milling head ER25 with IKZ, i1:1, axial - Tool measurement Measuring probe for turret to determine the tool correction value (automatically swivels into the machining area for tool measurement when setting up the turret) - Extraction units - Air cleaner, mechanical AR VF, 5-stage for emulsion mist/smoke Due to the discontinuation of the trade, there is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring equipment, measuring machines, cooling medium etc. in high quality at a favorable price. Shipping, dismantling and loading costs can be reduced when buying several auction machines from the same seller.

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Cgsb Eert Ip Njnan Ajt Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: not inspected (used), Year of construction: 1997, operating hours: 24,100 h, Functionality: not functional, machine/vehicle number: 407345, The hard drive was replaced, the machine does not work. One y-axis All nodes in the set. There is no equipment. Loading is free. Cgsb Esq Ii A Denan Ast

Condition: excellent (used), Year of construction: 2015, operating hours: 4,162 h, Functionality: fully functional, turning diameter: 100 mm, spindle speed (max.): 7,000 rpm, bar diameter: 36 mm, TECHNICAL DETAILS Number of axes: 10 (X1 / Z1 / Y1 / C1 / X2 / Z2 / Y2 / C2 / X3 / Z3) Number of spindles: 2 Number of turrets: 2 Main spindle Spindle nose: A2-5 Spindle drive power: 11 kW Spindle speed: 7,000 rpm Max. Bar diameter: 36 mm Max. Diameter of the main spindle chuck: 100 mm Min. resolution C-axis: 0.001° Counter spindle Spindle nose: A2-5 Spindle drive power: 11 kW Spindle speed: 7,000 rpm Max. Bar diameter: 36 mm Max. machinable diameter: 100 mm Minimum C-axis resolution: 0.001° Csbeuv Eh Rj Enan Asgt Turret head 1 Number of positions: 12 Number of motorized positions: 12 Speed of the driven tools: 6,000 rpm Power of the driven tools: 4.6 kW Turret head 2 Number of positions: 12 Number of motorized positions: 12 Speed of the driven tools: 6,000 rpm Power of the driven tools: 4.6 kW MACHINE DETAILS Supply voltage: 400 V Space requirement: 3,682 x 1,430 mm Height of the machine: 1,900 mm Weight of the machine: 5,000 kg Switch-on time: 6,602 h Operating time: 4,162 h EQUIPMENT - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Part removal - Counter spindle prepared for pneumatic chuck - Optional: It is possible to purchase a large number of clamping devices as well as fixed and driven tool holders in high quality. (to be seen on the last pictures)