Bed type milling machines - univ. 1300-1999mm x-travel used for sale
8
+++ This machine is auctioned in cooperation with a longtime Maschinensucher dealer! +++
Machine has only run one shift.
TECHNICAL DETAILS
Bed milling machine with a universal milling head swiveling in two axes.
Machine with Heidenhain TNC 426 control.
longitudinal travel: 1300 mm
vertical travel: 1000 mm
transverse travel: 1000 mm
Table size: 1600 x 570 mm
Max. table load: 2 t
spindle support: ISO 50
spindle motor: 12 kW
spindle speeds: 50 - 2000 rpm
feeds: 5 - 10000 mm/min
rapid traverse: 10 m...
9
x-travel 1300 mm
y-travel 700 mm
z-travel 550 mm
C0olwl9
surface area 1635 x 460 mm
control TNC 114 B
tool taper ISA 50
spindle speed: 30 - 2066
total power requirement 11 kW
weight of the machine ca. 3,9 t
dimensions of the machine ca. 2,5 x 1,7 x 2,2 m
2
x-travel 2.000 mm
y-travel 800 mm
z-travel 800 mm
Control HEIDENHAIN TNC-426
table-size 2000 x 700 mm
speeds 20 3000 U/min
table weight 3.000 Kg
spindle drive 17 kW
taper ISO 50
rapid traverse feeds 12.000 mm/min
Bz98fbtgej
total power requirement kW
weight of the machine ca. 9 t
dimensions of the machine ca. m
8
General Data
Machine weight 11000 KG
Control Unit
Brand Siemens
Model 802 CNC
Main Drive
Number of spindles 1
Spindle speed range 25 - 1600
Number of axis 3
Movement
X-Axis Movement 1600 mm
Y-Axis Movement 700 mm
Z-Axis Movement 1000 mm
Table
Outer length 2000 mm
Crr3c7j
Outer width 700 mm
This Droop & Rein FS 100 ke Milling machine was built in 1973 and was completely overhauled in 2000. It has less than 1000 operating hours because prefered working with Heidenhain controls. This 3 axis ma...
4
General overhauled: 2017
Control: HEIDENHAIN TNC 320 (New in 2017) + Handwheel HR 510
X-axis: 1300mm
Y-axis: 630mm
Z-axis: 630mm
Table size: 1.700 x 630mm
Max. Table load: 3.000Kg
B3n0f0bxke
Universal manual milling head with SK 50 holder
Max. Spindle speed: 2.500rpm
Max. Spindle motor power: 16kW
Max.feeds:5.000mm/min
Rapid feeds:8.000mm/min
9
Manufacturer: Kiheung
Model: KNC-U800
Year of manufacture: 2003
Control: Heidenhain TNC 426
Condition: fully functional
Bxrn9vfl82
Operating hours machine: 27064 h
Operating hours control: 28179 h
Program run: 7436 h
Spindle running time:6946 h
Traverse: 1900 mm (x), 710 mm (y), 800 mm (z)
Table length: 2300 mm
Table width: 820 mm
Table load: 3500 kg
Spindle taper: ISO 50
Spindle speed: 10 – 3000 rpm
Feed rate: 10 – 5000 mm/min
Weight: approx. 12 t
Motor power: 18 kW
without vice and tool hold...
3
X1800 Y 800 Z 1000 COURSES
ISO 50. 3000 rpm
MANUAL HEAD
YEAR 2002
CNC HEIDENHAIN 426
B33pyohkvz
PORTABLE HANDWHEEL
( jaws not included, available in february 2022, few hours of use, special price for quick purchase )
12
Parts shown by hand not come.
P3dth
10
x-travel 2.000 mm
y-travel 1.000 mm
z-travel 1.000 mm
Control TNC 530
table-size 2.000 x 900 mm
Internal cooling system 14 bar
milling head -swivable +/- 2,5 x 2,5 °
tool taper ISO 50
Spindle power 22 kW
rapid traverse feeds 20.000 mm/min
table weight 3.500 Kg
handwheel Heidenhain HR-410
Petgb
number of spindle speeds 3.000
operating hours ca. 40.000
Spindle hours 17.000 h
4
Tos FGSV 50
Table 630x1800
X-1400
Y-630
Z-500
B39lpvt37s
Iso 50
Good condition!!!
x-travel: 1500 mm
Oolmr
y-travel: 500 mm
z-travel: 450 mm
spindle taper ISO: SK50
control: Heidenhain TNC 310
turning speed range: vertical: 60 - 3.600 U/min
range of revolution per miute: horizontal: 30 - 1.800 U/min
spindle head swivable left - right: 90 °
distance spindle center to column: min./max.: 100 / 650 mm
distance spindlenose - table min./max.: min./max.: 80 / 580 mm
feed:: X+Y+Z: 10 - 4000 mm/min.
rapid traverse: X+Y+Z: 15,0 + 15,0 + 10,0 m/min
table surface area: 1800 x 500 mm
table...
6
Travels XYZ: 1600 x 720 x 1000 mm
Table: 2000 x 700 mm
Spindle 2066 rpm with gear box
T slot (nbr x width) 8 x 16 mm
B37qoqgn2p
Electrical cabinet good
HURON universal head with SA 40 attachment
White painting
Heidenhain visu 3 axis ND780 on operator panel
Centralized lubrication
3
x-travel 1300 mm
y-travel 630 mm
z-travel 630 mm
Control Heidenhain
table surface area 1700x630 mm
Table load 3000 kg
turning speeds 80-3150 U/min
spindle taper ISO 50
total power requirement 12 kW
B0dvcgx8tj
weight of the machine ca. 8 t
dimensions of the machine ca. 2,8 x 2,6 x 2,2 m
9
Control Unit
Brand HEIDENHAIN
Model TNC 530
Main Drive
Spindle speed range 18000
Movement
X-Axis Movement 1750 mm
Y-Axis Movement 1400 mm
Z-Axis Movement 600 mm
Table
Outer length 1200 mm
Clsm3sv
Outer width 1000 mm
Tools
Slots in storage 30
Type of tool holder HSK 63
This FPT Stinger Milling Machine was built in 2005 in Italy. It is equipped with a Heidenhain TNC 530 control unit. This machine can work with a spindle speed up to 18000 rpm.
Application Types
Milling
10
x-travel 2.500 mm
y-travel 1.000 mm
z-travel 1.000 mm
Control HEIDENHAIN TNC-530 HSCI
table-size 2.700 x 850 mm
rapid travel x/y/z 10.000 mm/min
feed 25 m/min
milling head -swivable +/- 2,5 / 2,5 °
tool taper ISO 50 DIN 69871 AD
number of spindle speeds 3.000 U/min
spindle drive 22 kW
tool change unit 24 Pos.
Internal cooling system 20 bar
rotary table 800 mm
Chip coveyor Inkl
handwheel HR- 410
Machine on 18.816 h
number of spindle speeds 7.212 h
total power requirement 46 kVA
weight of the ...
x-travel:1500 mm
y-travel:1000 mm
z-travel:950 (opt.1500) mm
T-slot (width-distance-quantity):22H8x7 Stk. mm
Table area:1600x1050 mm
max. table load:3000 kg
spindle taper:50 SK
spindle speeds:3500 1/min.
spindle motor:15/18,5 (22/26 opt) kW
feed:1~5000 mm/min
rapid speed:10 m/min
positioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm
repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm
total power requirement:30 KVA
weight of the machine ca.:10 t
universal milling head:manuell
LI...
9
SHW UF 5
Travel
- X-axis (rotary table): 1.500 mm
- Y-axis (headstock vertical): 1.000 mm
- Z-axis (headstock horizontal): 1.100 mm
Control system
- CNC control: Heidenhain TNC 430
Feed rate
- X - axis: 2 - 12.000 mm/min
- Y- and Z- axis: 2 - 18.000 mm/min
Universal milling head in orthogonal design
- swivel range milling head: 360 x 1 degree
- swivel range milling head: 180 x 1 degree
- tool holder: SK 50 DIN 69871
- speed range: 36 - 4.000 1/min
year of construction 1997
- 2022 - partial...
7
x-travel 1600 mm
y-travel 720 mm
z-travel 650 mm
table surface area 2500 x 575 mm
table load 2 t
T-slots 3
T-slot - width 22 mm
T-slot - distance 152,5 mm
Vuf7hu
distance spindle nose and table 80 - 730 mm
feed stepless 20 - 900 mm/min
rapid traverse: longitudinal and cross 2000 mm/min
no. of turning speeds 16
turning speed range 45 - 1400 U/min
spindle taper SK 50
total power requirement 19 kW
weight of the machine ca. 9 t
dimensions of the machine ca. 3,4 x 3,2 x 2,8 m
15
Bed Milling machine Bed Miller
Model: CNC
Manufacturer: :FIAS Berico
Type: :AF-2000x800
CNC: Heidenhain TNC122
Byk2t2x0e8
Renewed servodrives
Automatic X-travel: :1700mm
Automatic Y-travel: 900mm
Automatic Z-travel: :9500mm
Spindle-speed: 30-2000rpm
Table-dimensions: :2000x800mm
ISO 50
Machine-dimensions: 3200x2400x2700 (shipping / motor dismantled)
15
General Data
Measurements width 4400 mm
Measurements depth 2400 mm
Measurements height 3000 mm
Machine weight 15000 KG
Bzvchgmbi0
Control Unit
Brand HEIDENHAIN
Model TNC426
Main Drive
Spindle speed range 6000
Spindle motor power 15 KW
Tool taper SK40
Number of axis 3
Movement
X-Axis Movement 1890 mm
Y-Axis Movement 1016 mm
Z-Axis Movement 1000 mm
Table
Outer length 2200 mm
Outer width 800 mm
Min distance between vertical spindle and table 150 mm
Max distance between vertical spindle and tabl...
5
x-travel 2.500 mm
y-travel 1.000 mm
z-travel 1.000 mm
Control TNC 530 HSCI
table-size 3.100 x 1.100 mm
milling head -swivable UAD 0.1/0.1 Grad
handwheel HEIDENHAIN HR-410
number of spindle speeds 6.000 U/min/rpm
spindle drive 22 kW
rapid travel x/y/z 20.000 mm/min
feed 10 m/min
T-slots 5/200
table weight 6.000 Kg
taper ISO 50
weight of the machine ca. 20 t
Cn90vs9g
dimensions of the machine ca. 7.750 x 4.400 x 3.100 m
1
digital 3 axis
table 2000X700MM
Vu87xi
travels 1650X1000X1000MM
spindle speed 2066RPM
8
Machine-Details
Stock-No. 1105-03485
Type of machine Bed Type Milling Machine - Universal
Make YCM SUPERMAX
Type 180 U
Year of manufacture 1990
Type of control CNC
Storage location FRANCE
Country of origin taiwan
Delivery time on inquiry
Freight basis ex location
Technical details
x-travel 1800 mm
y-travel 740 mm
z-travel 800 mm
table-size 2000 x 800 mm
Fgycmpqm3
T-slots 5
T-slot - width 18 mm
taper ISO 50
turning speeds 2500 U/min
spindle motor 15 kW
feed 9000 mm/min
rapid traverse: 12000 mm/m...
3
x-travel:1600 mm
y-travel:800 mm
Y7lcc2jkl
z-travel:630 mm
spindle taper:SK 50
feed speeds:10-6000 mm/min
rapid traverse:6 m/min
turning speed range - stepless:20-2000 U/min
max. table load:5000 kg
dimensions of switch cabinet:1800 x 530 x 2000 mm
total power requirement:18 kW
weight of the machine ca.:11 t
dimensions of the machine ca.:4,6 x 2,9 x 2,62 m
with PHILIPS NC 6664 3-axis control with program memory, hydraulic tool clamping, coolant
system, chip-conveyor, horizontal and vertical spi...
11
Bed milling machine of the brand Jarbe
ISO 50 with universal milling head / rapid traverse
Digital display Mitutoyo (this was renewed incl. scales)
travels approx. X 1400 Y 325 Z 500
cutter holders, reduction ISO50-ISO40, horizontal milling device
The machine can be inspected under power.
B2sdptxbk3
Tools are available and can be purchased. see pictures
15
General Data
Measurements width 3840 mm
Measurements depth 2773 mm
Measurements height 3074 mm
Machine weight 8500 kg
Control Unit
Brand Fagor
Model 8020
Remote Control Yes
Main Drive
Number of spindles 1
Spindle speed range 50-1800 1/min
Spindle motor power 14.7 kW
Tool taper ISO 50
Movement
X-Axis Movement 1320 mm
Y-Axis Movement 610 mm
Z-Axis Movement 610 mm
Workpiece
Workpiece weight 3000 kg
Dytslq
Table
Outer length 1700 mm
Outer width 510 mm
Tslots size 18 mm
Number of tslots 5
Distan...
3
x-axis 3.000 mm
y-axis 1.270 mm
c-axis 0,001 °
c-axis -120/+120 0
b-axis 0,001 °
z-axis 1.500 mm
Control HEIDENHAIN iTNC 530
Rotary table surface 1.250 x 1.250
B2xc0p3afr
table weight 7.000 Kg
rapid feed 20.000 mm/min
working feed 10.000 mm/min
taper HSK A 63
turning speeds 60-18.000 U/min
Motor power 34 kw
handwheel inkl
coolant 20 bar
Chip coveyor inkl
Tools changer 40 pos.
weight of the machine ca. 25.000 kg
2
cnc heidenhain tnc 407
travels 1500X700MM
Begnkvwuub
spindle iso 40
10
Table size: 1600 x 500 mm
Table load: up to 1800 kg
Number of T-slots: 5
T-slots, width: 18 mm
T-slots, arrangement: 80 mm
Machine dimensions: 2475 x 2260 x 2180 mm
Weight: 5000 kg
X axis: 1,200 mm
Y axis: 700 mm
Z axis: 500 mm
X axis feed speed: 10-1000 mm / min
Y axis feed speed: 10-1000 mm / min
Z axis feed speed: 5-500 mm / min
Accelerated feed of the X axis: 2200 mm
Accelerated feed of the Y axis: 2200 mm
Accelerated feed of the Z axis: 1100 mm
Vertical spindle holder: ISO 50
Vertical dist...
5
Table surface 1800x630
X 1400
Y 500
Z 630
SK 50 spindle 3000rpm
Heidenhain TNC 124 control
Weight 5200 kg
In very good condition
B2wwonrlia
incl tools
Typ: UBF-R 2000/13
WORKING HOURS: 34528
Baujahr: 1998
Verfahrweg X: 2000 mm
Verfahrweg Y: 1200 mm
Verfahrweg Z: 1300 mm
Rundtisch C: 360°
Spindelaufnahme: SK50
Steuerung: Heidenhain 426/430
Sonstiges: Kopf in 2 Achsen automatisch um 90° schwenkbar, manuell 1°
Gx8cmk
WE ORGANIZE DISMANTLING LOADING SECURING MACHINE ON TRUCK.
WE ORGANIZE AS WELL TRANSPORT TO THE CUSTOMER DESTINATION
Steuerung: Fanuc OM - F
Verfahrwege X/Y/Z: 1800 / 740 / 900 (vertikal) mm
Tisch: 2000 x 600 mm
Spindel Nase - Tisch: 100 - 1000 mm
Spindelmitte - Ständer: 105 - 845 mm
Max. Werkstückgewicht: 2000 Kg
Eilgang X/Y: 9 m/min, Z: 6 m/min
Vorschub: 2,5 m/min
Spindel Motor: 15 KW
Bjj2ltdijd
5
x-travel 2.700 mm
y-travel 2.400 mm
z-travel 1.000 mm
Control HEIDENHAIN TNC 426 D
table-size 3.000 x 1.000 mm
table weight 8.000 Kg
distance between columns 1.600 mm
working speed: 25.000 mm/min
rapid taverse 30.000 mm/min
taper ISO ISO 50
turning speeds 3.000 U/min
engine output 28 kW
total power requirement 51.9 kVA
Gycyc8
weight of the machine ca. 25 t
dimensions of the machine ca. m
12
Additional measurement in 3 axes: HEIDENHAIN
tool clamping cavity: ISO SK40
Longitudinal stroke of the X-axis: 1,400 mm
Cross stroke of the Y-axis: 630 mm
Vertical stroke Z-axis: 500 mm
Number of steps / speed range: 18 / 35.5 - 1,800 n / min
Spindle motor power: 15 kW Max.
Spindle torque: 2,500 Nm
Power: 15 kW
Fbmh0tisk
Feed range: X - Y / Z.
Number of steps / range: 16/10 - 1 800 / 2.5 - 450 mm / min
Rapid traverse: 4,000 / 1,000 mm / min
Table surface (width x length): 630 x 1,800 mm
Max....
7
Information:
Table size: 1600 x 360 mm
Table load: up to 300 kg
Number of T-slots: 3
T-slots, width: 18 mm
T-slots, arrangement: 80 mm
Table tilt: -45 / + 45 degrees
Machine dimensions: 1730 x 1760 x 1700 mm
Weight: 2800 kg
Technical data:
X axis: 1300 mm
Y axis: 320 mm
Z axis: 450 mm
X axis feed speed: 30-750 mm / min
Y axis feed speed: 20-500 mm / min
Z axis feed speed: 15-375 mm / min
Accelerated feed of the X axis: 1200 mm
Accelerated Y axis feed: 800 mm
Accelerated feed ...
5
a used well-preserved CNC bed type milling machine with HEIDENHAIN control, HURON-head, hydraulic Werkzeugklemmumg,.
Bdcbxllrpu
Coolant system, central lubrication system, lighting, TFT - monitor new.
Traverse path x/Y / Z 1600/ 800 / 650 mm
Spindle retainer for SK 50
Spindelderhzahl 60-1800U/min
Working feed 10-3000 mm / min
Rapid traverse 10 m / min
Table size 1800x610mm
Machine weight 9500 kg
Table load: 3000 kg
6
Control: NC - path control incl. screen
HELLER uni Pro NC 80-C
TECHNICAL DATA
Traversing range
x-axis (longitudinal) 1400 mm
y-axis (vertical) 560 mm
z-axis (crosswise) 500 mm
Table clamping surface 1700 x 500 mm
1 centering slot 18H7
4 clamping slots 18H12/100
workpiece weight max. 4500 kg
drive power 30 kW
Speed range 33-2000 rpm
Number of speeds 18
step jump 1,25
Gear stages 4
Tool holder (DIN 2079) ISO 50
EQUIPMENT/ACCESSORIES
Vertical milling head
Pr7ev
Horizontal spindle
Clamping hydraulic...
3
Maschinen-Details
Lagernummer 1105-03368
Maschinenart Bettfräsmaschine - Universal
Fabrikat HURON
Typ SXB 623
Baujahr 1985
Steuerungsart CNC
Steuerung HEIDENHAIN TNC 155
Lagerort FRANKREICH
Ursprungsland Frankreich
Lieferzeit sofort
Frachtbasis ab Lager, frei verladen Lkw
Technische Details
x-Weg 2000 mm
y-Weg 730 mm
z-Weg 1000 mm
Tischgröße 2400 x 750 mm
Spindelaufnahme ISO 50
Steuerung HEIDENHAIN TNC 155
Gesamtleistungsbedarf 35 kW
Maschinengewicht ca. 12 t
Raumbedarf ca. 3.5 X 3 X 3.2 m
Bxtv...
2
Bed type millingmachine, manual universal head, Spindel 15 kW ISO50 3500 rpm incl oilcooler, no ATC, Heidenhain TNC 355 Control. TS120 3D probe, and 12 m of fence to secure machining area, with sliding door in front of the machine
Machine can be inspected live on site.
Travel X=1800, Y=815 and Z=802mm
Machining hours around 5000
Bjufv3k8np
7
SPINDLE DIA 110 MM. ISO 50
TABLE 1.100 x 1.300 MM.
TABLE CAPACITY 8.000 KG.
CROSS TRAVEL TABLE (X) 3.100 MM.
MAST LONGITUDINAL STROKE (W) 1,500 MM.
VERTICAL STROKE HEAD (Y) 1,600 MM.
SPINDLE STROKE (Z) 600 MM.
SPINDLE MOTOR POWER 20.5 KW.
SPINDLE SPEED 12 ÷ 2,000 G / MIN.
Pstsz
ECS 2600 CNC
TOTAL WEIGHT 24 TONN.
5
1 used as good as new conventional high performance bed milling machine with 3 axes digital display make FAGOR and full equipment
Make: HO-CHUN, Origin Taiwan
Model: UH 1250 A
Year of manufacture: 2007/12
Technical data:
Table size 1800 x 500 mm
Spindle support, universal vertical milling head SK 50
Horizontal spindle mount SK 50
traverse paths:
X-axis 1500 mm
Y-axis 500 mm
Z-axis 470 mm
3 speed ranges, infinitely variable 40 - 1750 rpm.
feed range longitudinal + transverse, stepless 8 - 1200 mm...
Reference: FR114
Model PU 771
Serial number 1640
Travels (mm) X1900 Y1000 Z1000
Table size (mm) 2235 x 1000
Spindle attachment (ST) 50
Spindle speeds (Rpm) 27/ 30-2066
Feeding speeds (mm/mn) Var 2800
Main motor power (Hp) 12
Machine equipped with : DRO 3 axis HEIDENHAIN / Variable feeding speed / Centralized greassing
Byu7ovala2
Dimensions LxWxH (mm) 2450x2500x2400
Weight of the machine (T) 8
6
Code 8529
Description CNC Bed milling machine
Make Zayer
Type 2200 BF 3
Machine nmb 52248
Year 1986
Control Fagor 8020
Table size 2200 x 800 mm
Pvvnd0rk
Movement table (X) 1830 mm
Cross traverse ram (Y) 1016 mm
Vertical traverse milling head (Z) 1016 mm
Spindle taper ISO 50
Max. Weight on table 4000 kg
No. of spindle speeds 18 steps
Spindle speeds 28 – 1800 rpm
Feeds dir. Progr. X-Y-Z 3 – 5000 mm/min
Rapids Longitudinal 5 m/min
Cross 5 m/min
Vertical 5 m/min
Total Wei...
2
Maschinenart Fräsmaschine - Universal
Fabrikat HURON
Typ MU 5
Baujahr 1975
Steuerungsart konventionell
Lagerort FRANKREICH
Ursprungsland Frankreich
Lieferzeit SOFORT
Frachtbasis ab Lager, frei LKW
Technische Details
x-Weg 1300 mm
y-Weg 700 mm
z-Weg 550 mm
Tischgröße 1500 x 460 mm
Spindeldrehzahlen 15 - 2500 U/min
Spindelaufnahme SK 40
Vorschubbereich x - Richtung 1,6 - 820 mm/min
Vorschubereich z-Richtung 1,6 - 820 mm/min
Eilgang X + Z - Achsen 2,8 m/min
Eilgang y - Richtung ...
Universal milling machine FGS 32/40 - TOS KURIM DIGITAL READINGS HEIDENHAIN very good technical condition.
The machine is completely serviced from the tool room, has HEIDENHEIN digital displays, hardened guides, hydraulic tool clamping, accelerated feeds, ISO-50, swivel head, retractable quill, mechanically retractable beams, steering from a fishing rod, complete documentation manuals.
TECHNICAL SPECIFICATIONS:
- Table area: 400 x 1400 mm
- Longitudinal movement of the table - X axis: 1000 mm...
5
good used bed milling machine with TNC 145 from trade-in
Y8jgkbdt
8
table size 2500 x 630 mm
Spindle holder, universal milling head SK 50
Dgl9aeh
Horizontal spindle support SK 50
traverse paths:
X-axis 1600 mm
Y-axis 600 mm
Z-axis 650 mm
max. table load 2000 kg
Speed range, 16 steps 35,5 - 1120 rpm.
Feed range longitudinal + transverse 10 - 2000 mm/min.
vertical 5 - 1000 mm/min.
rapid traverse longitudinal + transverse 4000 mm/min.
vertical 2000 mm/min.
Drive power 25 kW
Machine dimensions L x W x H 3550 x 2500 x 3000 mm
weight approx. 9.800 kg
weight of control...
8
Control: Heidenhain TNC 151
Travel X: 1700 mm
Travel Y: 700 mm
Xm8wo
Travel Z: 800 mm
table size: 2000 x 500 mm
Spindle speed max: 1800 rpm
tool holder: SK 50
Table load max: 5 t
Total power requirement: 15 kW
Machine weight: approx. 7 t
Space requirement: 3500 x 2200 x 2300 mm
Head: Universal milling head
4
- available
Bvo7yjamvw
- good condition
1