Eccentric Press - Single Column

WEINGARTEN N 63

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection Psdpfx Ahek S Htxs Djra - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: new, column width: 2000 x 1000retracting speed: 150weight approx.: 35.000stroke: 800total power requirements: 30daylight: 1000rapid traverse: 120pressure: 500: 2500 x 1500working speed: 12messurements (LxWxH): 2500x2700x5400 Pedped Aca Asfx Ah Dsra

Year of construction: 1977, condition: used, pressure 100 t Psdpfelp U Daex Ah Dsra throat 410 mm stroke 8-112 mm no. of strokes 55/82 Hub/min ram - range of adjustment 80 mm table surface area 950x700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 800 mm total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 1600x2200x3000 m

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Podpfolc N Rysx Ah Dera

Condition: used, Pressure: 300t Length of stroke: 500mm Up table size: 1760x1200mm Down table size: 1760x1200mm Back pressure: 100t Weight: 33000kgr New hydraulic and electric systems Pjdpfxo Dvatj Ah Dora EXCELLENT CONDITION

Year of construction: 1990, condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Bed size 1200 x 900 Daylight 1150 Stroke 700 Cylinder dia 300 New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton Prodpfxeg S Uc Dj Ah Dsa

Condition: used, Year of construction: 2002, Pressure 250 t Bending length 3550 mm Frame width 3000 mm Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Space requirement approx. 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt Pedswn Ebispfx Ah Dora - Safety guard

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 150 t, operating speed: 90 mm/s, reverse speed: 90 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 4,500 mm, total width: 1,820 mm, total height: 2,850 mm, overall weight: 16,000 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 3,060 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,200 mm, warranty duration: 6 months, control type: CNC control, back gauge adjustment: motor-driven, number of axes: 7, actuation type: electric, Equipment: safety light barrier, Safan on the market: Safan H-Brake 150T – 3100 mm press brake. This machine is equipped with a conventional hydraulic drive, renowned for its exceptional lifespan and reliability. This is why these models are so popular on the used machinery market. The chromed pistons and the application of specially selected, high-quality piston seals ensure long-lasting performance of these components. In cooperation with Schneider Hydraulics, servo valves have been developed to provide precise control of the ram’s descent and return stroke. Predpoxr Uq Sofx Ah Dja The machine is equipped with full CNC-controlled axes and Wila hydraulic clamps, allowing for a wide range of bending applications and easy retooling. Safan E-Brake 150-3100, year of manufacture: 2010 - Safan TS 1 controller - 2D bending system - 17'' color touchscreen monitor - Operator panel on a swiveling arm - CNC-controlled Y1/Y2 axes - CNC-controlled X-axis - CNC-controlled R-axis - CNC-controlled Z1+Z2 axes - CNC-controlled delta X axis - Wila® upper tool adapter (mechanical clamping), hardened - Wila® lower tool table - Lightguard safety with upper beam descent control option - Work area illumination at the front and rear of the machine - Electrical installation: 3/N/PE, 50 Hz, 400/230 V - Opening: 690 mm - Table length: 3060 mm - Distance between machine frames: 3300 mm

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Prjdpfx Ahelmmwrj Dea

Year of construction: 1969, condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table surface area 800 x 630 mm ram adjustment 70 mm no. of strokes im Dauerlauf 80 Hub/min max. distance table - ram 417 mm ram surface 500 x 400 mm clamping plate thickness 70 mm total power requirement 6 kW Pjdoh Dfctjpfx Ah Djra weight of the machine ca. 5,5 t dimensions of the machine ca. m