Press brake

SafanDarley

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 400 V, stroke length: 300 mm, operating speed: 90 mm/s, throat depth: 1,000 mm, total length: 4,540 mm, total width: 1,900 mm, total height: 2,950 mm, overall weight: 16,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 4,520 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, distance between stands: 3,200 mm, installation height: 950 mm, control type: CNC control, back gauge adjustment: CNC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, SafanDarley press brakes are innovative and highly efficient machines on the market, designed for sheet metal processing by the Dutch manufacturer. The precision of bending and reliability have been recognized by users in Poland and worldwide. SAFAN E-Brake is a series of machines equipped with an electric drive, which has been successfully used in our machines for almost 30 years. Currently, the largest model of press brakes with an electric drive is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Lenze motors and servo motors, controlled by long-life frequency inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to the innovative drive, the machine consumes electrical energy primarily during the downward movement of the slide and the bending process. The slide returns using the force generated by springs mounted on both sides of the machine. Even when idle, the machine virtually does not consume electrical energy, as the system does not have a hydraulic pump motor to maintain pressure, as in hydraulic press brakes. We estimate that the electrical energy consumption is up to 70% lower than in conventional hydraulic press brakes. In addition, the electric drive is insensitive to temperature differences that may occur in production halls. The machine performs excellently in both long and short production runs. Safan E-Brake 150-310 model 2009 - Capacity: 150 tons - Bending length: 3060mm - Controller: Safan E-Control - Bending system in 2D mode - 17” color AcuTouch touchscreen monitor - Service panel on a movable arm - Y1/Y2 axis controlled by CNC Back gauge: - X1-X2 axis controlled by CNC - R1-R2 axis controlled by CNC - Z1+Z2 axis controlled by CNC - Upper tool adapter Wila (hydraulic clamp) - Lower tool adapters Wila (hydraulic clamp) - Lightguard safety system with the option to control the upper beam descent - Work area lighting at the front and rear of the machine - Electrical installation 3/N/PE 50 Hz 400/230 V - Opening: 690mm Bedpfx Adex Ewnps Sjli - Distance between machine frames: 3300mm - Machine dimensions (L x W x H): 4450x2120x2900 - Weight: 16,500kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm Blodpofx Hv Hefx Ad Soi stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: like new (used), Year of construction: 2023, functionality: fully functional, pressing force: 100 t, operating speed: 75 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 4,450 mm, total width: 1,820 mm, total height: 2,650 mm, overall weight: 7,900 kg, controller manufacturer: Lenze, working width: 3,060 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,200 mm, warranty duration: 6 months, control type: CNC control, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 6, actuation type: electric, Equipment: CE marking, documentation/manual, foot remote control, safety light barrier, SafanDarley edge bending machines are innovative and highly efficient sheet metal processing machines from the Dutch manufacturer. Their bending precision and reliability have been highly appreciated by users in Poland and worldwide. The SAFANDARLEY E-Brake edge bending machine features an electric drive. Lenze servomotors, controlled by frequency inverters from the same manufacturer, enable fast and reliable operation of the system for many operating hours. Additionally, the machine consumes electrical energy only during the downward movement of the slide. The slide returns to its original position using the force generated by springs. Even when the machine is idle, it practically does not consume electrical energy because the system does not have a pump, as is the case with hydraulic presses. We estimate that the electrical energy consumption is 70% lower than in conventional hydraulic presses. SAFANDARLEY servo-electric edge bending press, model E-Brake Press force: 1000 kN (100 tons) Slide stroke: 300 mm Opening: Q=590 mm Upper beam lowering speed: 75 mm/s Upper beam accuracy: +/- 0.01 mm Maximum speed of the back gauge fingers: 350 mm/s Maximum reach of the back gauge fingers (third point of support, reach in the X-axis): 1000 mm Bsdper Ndxqefx Ad Sjli Back gauge range in the R-axis: 150 mm Connected power: 11 kW Weight: 7900 kg Machine width: 4550 mm Machine depth: 1820 mm Machine height: 2510 mm Power supply: 3/N/PE 50 Hz – 400/230 V Servo-electric drive (without a hydraulic system) Power transmission via belts CNC-controlled axes: Upper beam: CNC axes: Y1-Y2 Back gauge: CNC axes: X-R-Z1-Z2 Hydraulic upper clamp: WILA Machine inspection and testing are possible.

Condition: excellent (used), Year of construction: 2017, Very well-maintained E Brake from SafanDarley. Type: E Brake B 100 3100 Capacity: 3100 x 100 tons Bledpfxozfphls Ad Sei Y1, Y2, X, X1, R, Z1, and Z2 CNC Hydraulic Wila NS top clamp Includes a set of tools.

Condition: used, Year of construction: 2013, functionality: fully functional, Pressing force: 170 t Bending length: 3050 mm Bodew Imiyspfx Ad Sjli Distance between frames: 2550 mm Control: CYBELEC ModEva 10 S Frame throat depth: 405 mm Ram stroke: 400 mm Distance table/ram: 320-720 mm Downward speed: max. 220 mm/sec Bending speed: max. 10 mm/sec Return speed: max. 220 mm/sec Connected load: 27 kVA Total power requirement: 18.5 kW Machine weight approx.: 13,600 kg Space requirement approx.: 4200x2000x3000 mm

Condition: good (used), Year of construction: 2017, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 100 t, stroke length: 300 mm, operating speed: 10 mm/s, Equipment: CE marking, safety light barrier, Bending capacity: 100 Ton Bending length: 3100 mm Backgauge: 550 mm Stroke length: 300 mm Bending speed: 10 mm/sec Supplied with: Bedszbvulopfx Ad Soli - 2 support arms - Integrated safetyscreen - 6 axis controlled Y1, Y2, X, R, Z1, Z2 - Cabinet with many tools - User manuals Country of origin: Netherlands Motor power: 11 kW Machine (L×W×H): 400 x 230 x 290 cm Machine weight: 6350 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Bjdpfjxpuipjx Ad Ssli

Condition: good (used), Year of construction: 2002, Nette gebruikte kantbank van Safan Type CNCL K 170 3100 TS1 Blodowz I Ekepfx Ad Soi Safan TS1 besturing Capaciteit 3100 x 170 ton Y1, Y2, X, R, Z1 en Z2 CNC gestuurd CNC Bombering Wila New Standard gereedschapsklemming

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table length: 3,060 mm, table height: 930 mm, total length: 4,350 mm, total width: 1,820 mm, total height: 2,680 mm, overall weight: 7,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Unique opportunity for those seeking a top-of-the-line, immediately available CNC press brake. We offer a SafanDarley E-Brake 100-3100, 100% electric, a NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production; the few operating hours are solely related to demonstration activities. Key features: • New machine from showroom • Never used in production • Ready for immediate delivery • High-efficiency electric technology • High bending accuracy and repeatability • Reduced operating and maintenance costs compared to traditional hydraulic presses Bodpfx Aezcmabod Ssli Machine configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bending sequence calculation • Motorized and independent Z1+Z2 axes • Extra back gauge Z0+Z3 • Wila upper table with hydraulic locking • Wila lower table with mechanical locking and a set of bars for using Schiavi-type dies • Mobile aluminum front supports • Integrated photocells • Clear opening 590 mm / stroke 300 mm • Interface for Industry 4.0 The machine is offered for sale exclusively due to the renovation of the exhibition area and the replacement of the model currently in the showroom.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive Bodpeylt Ukofx Ad Sjli - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: used, Year of construction: 2002, Pressure 250 t Bending length 3550 mm Bjdpfxewn Ebij Ad Soli Frame width 3000 mm Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Space requirement approx. 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt - Safety guard

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressing force: 35 t, operating speed: 10 mm/s, table width: 60 mm, total height: 2,510 mm, overall weight: 3,250 kg, travel distance Y-axis: 590 mm, working width: 1,250 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 1,000 mm, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, working length: 1,250 mm, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 Blsdpfx Adev Eam Ns Soi X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: 11.2760, working width: 3,100 mm, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Control: CNC Max. working width: 3,100 mm Throat depth: 40 mm Max. sheet thickness: 8 mm Blsdpsw Tzkvofx Ad Ssi Back gauge: 1,000 mm Motor power: 16.5 kW MACHINE DETAILS Transport dimensions: 3,400 mm x 2,300 mm x 2,100 mm (L x W x H) Transport weight: 8,000 kg Transport packages: 2 Documentation available: Yes CE marking present: Yes

Condition: used, Year of construction: 2017, total length: 4,850 mm, total width: 2,390 mm, total height: 3,340 mm, Colour: Red Weight: 20.500 kg Price: On request - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 17650001 - Drive system: CNC - Control system brand: Bystronic - Control system type: ByVision Bedpfx Adezd U H Dj Ssli - Power [kW]: 34.0 - Number of axes [pcs]: 8: Y1+Y2+X1+X2+R1+R2+Z1+Z2 - Press force [ton]: 250 - Max. working width [mm]: 3100 - Column gap [mm]: 3200 - Throat depth [mm]: 250 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 400 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Additional finger stop, Lifting aid, Finger safety guard, Offline software - Transport dimensions: 4850mm x 2390mm x 3345mm (l x w x h) - Transport weight [kg]: 20500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum