Center lathe

WEILER Praktikant 160

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Guedpfxjy Rpr Ro Aqxeb Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A Guodpohy Tdyjfx Aqxeb - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: used, Year of construction: 1992, gebraucht 1992 010190 prompt, Zwischenverkauf v 19800 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Gedpfxoyycwxe Aqxeub Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. Godpfxey D N Das Aqxeub The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Godpfx Aqew Sdr Hoxeub Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock Guodpfjvrdlcjx Aqxeb >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal Guodpfx Aewthbieqxob >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Godpou H U S Hsfx Aqxoub Availability: on request Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160mm Center distance: 650mm Spindle bore: Ø 40mm Tailstock taper mount: MT3 Quill stroke: 85mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Other equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, guide rail & Pulley cover, 2 emergency stops, operating instructions, and much more upon request... Our service promise to you: - We are a certified master mechanical engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your desired color - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. Godpfx Aqswhzdmsxeub - We are happy to take care of shipping and/or delivery

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice Gujdpjq H D U Ejfx Aqxjb - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation