Cycle-controlled lathe

VDF Boehringer V 800

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm Guedszxlwcspfx Aipjh swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, diameter: Ø 315 mm 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pieces Coolant system HEIDENHAIN PT 880 4-axis digital readout (DRO) *

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 Guedpozuyfaefx Aipjh total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, chuck diameter: Ø 315 mm Gedpozxlv Eefx Aipsuh 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pices Coolant system HEIDENHAIN PT 880 4-axis DRO Boring bar for deep-hole drilling Drilling head for deep-hole drilling Infinitely variable boring-bar feed Various accessories *

Condition: used, Year of construction: 1970, turning diameter over bed 840 mm turning diameter over slide rest 640 mm turning length 3300 mm spindle bore 74 mm turning speeds 7,1-1400 U/min 3-jaw chuck 315 mm turning dia. in gap 920 mm length of gap 370 mm total power requirement 22 kW weight of the machine ca. 10 t dimensions of the machine ca. 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Gjdpfx Aioyqvwrjpeuh We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Technical details are shown on picture. Guodpfx Aijyyniaepoh

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Forward speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Guodpok Nz Ntsfx Aipjh Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Features: - Cylinder with lateral displacement via rack and pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at an extra charge.

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min Gsdpfx Aiou Nc Hkspeuh feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions *

Condition: defective spare-parts repository (used), Year of construction: 1980, Machine: Guedpfxsygarlj Aipsh Type: BFT 90/3at Manufacturer: UNION Year of manufacture: 1980 Control: NC control, HEIDENHAIN TNC 131 Electrical cabinet: by Reliance Machine group: Table-type boring mill Customs tariff number: 84592100 Technical data: Spindle diameter: 102 mm X-axis travel: 1000 mm Y-axis travel: 1250 mm Z-axis travel: 1600 mm Tool holder: ISO 50 DIN 2048 Spindle stroke: 710 mm Spindle speeds: 8 – 1600 rpm Table size: 1000 x 1120 mm Table rotation: 360° Max. workpiece weight: 2,500 kg Feed ranges: 0.8 – 2,000 mm/min Rapid traverse: 3.15 m/min Feed force: 16,000 N Spindle motor: 11 kW Total power requirement: 23 kW Machine weight: approx. 9.3 t Space requirement: approx. 5.3 x 3.8 x 3.14 m Special features and notes: Electronic issue: There is an electronic problem (control board needs to be replaced). The price has been adjusted accordingly (€10,500.00) to account for the necessary repair work. The HEIDENHAIN contouring control and the mechanical components of the machine are in good condition. Inspection is possible by appointment to assess the machine's condition and the extent of the electronic issue. For further technical details, please refer to the attached data sheet. Important information: All information is subject to confirmation, prior sale, errors, and availability. Technical data and all information provided are non-binding and only for orientation purposes. Contact: If interested or to arrange a viewing, please send a message or make an appointment. Disclaimer: The item is sold as described. Returns, warranty, and guarantee are excluded. The buyer agrees that the item is purchased in its current condition, "as seen," with no right of return. No liability is assumed for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above-mentioned terms and conditions.

Condition: good (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 3,000 mm, total length: 4,000 mm, overall weight: 8,000 kg, The machine is coming from maintenance and is accompanied by a large amount of accessories. Gjdpfsz Iif Hox Aipeuh

Condition: used, plate width 6400 mm plate depth 1870 mm Guodpogrm Ngefx Aipoh plate height 400 mm