CNC Lathe

TRAUB TND 400

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Djdjzacwdspfx Aifjck Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper ISO 40 DIN 69871 table diameter 700 x 500 mm swivellable B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm Dcodexmag Ujpfx Aifjk center hole 30H7 mm number of toolpositions 16 pos. tool taper ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6,0 kg max. total weight 50 kg feed speeds max. 10.000 mm/min rapid traverse 12 m/min input unit 0,01 mm total power requirement 17 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - MachiningCenter Univresal DECKEL MAHO - DMU 50 T - 5 Axis (3 + 2) - Swivel-Rotary-Table incl. Angle-Specification (manual Axis B+C via Handwheel)

Condition: used, Year of construction: 1995, Technical details: turning diameter: 480 mm turning length: 800 mm total power requirement: 30 kW turning diameter over bed slide: 240 spindle bore: 65 mm disc turret: 12 fach rapid travel range: 20 / 10 m/min weight of the machine ca.: 4,5 t dimensions of the machine ca.: 4 x 2,2 x 2,1 m with CNC TRAUB TX 8 H C-axis driven tooling, 6 positions 3,5 kW / 4000 rpm power chuck coolant attachment, chip conveyor diverse toolholders Dodpszn N R Ejfx Aifjck *

Year of construction: 1995, condition: ready for operation (used), Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible. Djdpfoy Tx Rzex Aifjck

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, total height: 1,750 mm, total width: 1,850 mm, overall weight: 3,800 kg, product length (max.): 2,850 mm, number of axes: 2, Horizontal turning machine manufactured in 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 120 mm. It includes a robust tool system with a turret and offers a cutting speed of 140 m/min. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details. • 20 kW = real power (mechanical/electrical output) • 27 kVA = apparent power (includes reactive power) • Internal taper: metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Max. faceplate diameter: 500 mm • Maximum chuck diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: turret (VDI 40) • Tool shank size: 32 x 25 mm • Number of longitudinal slides: 1 • Number of cross slides: 1 • Center distance: 1100 • Cross travel: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Feed rate longitudinal: 0.001 – 20 mm/rev • Feed rate cross: 0.001 – 20 mm/rev • Rapid traverse longitudinal: 10 m/min • Rapid traverse cross: 5 m/min • Feed force longitudinal: 10000 N • Feed force cross: 7000 N • Metric thread range: 0.1 – 250 mm • Whitworth thread range: 1/4 – 56 threads/inch • Module range: 0.125 – 28 • DP range: 0.05 – 48 • Maximum cutting cross section: 2.25 mm² • Cutting speed: 140 m/min • Gear stage I: 89 rpm at 100% duty cycle • Gear stage II: 355 rpm at 100% duty cycle • Coolant consumption (normal): 30 l/min at 0.4 bar • Coolant consumption (increased): 30 l/min at 3.5 bar • Noise level: 80 dB(A) • Electrical: • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: A small actuator that switches between the gear stages is defective; both gear stages are functioning. Additional equipment • Chip conveyor Technical Specification Djdpfx Aey Em Aveifock Counter Spindle No Driven Tools No

Condition: ready for operation (used), Offered is a Traub TND 400. Center distance: 800mm, turning diameter approx. 250mm, travel X/Y approx. 220mm/850mm, spindle bore: 65mm, speed range: 40-4000rpm, 12-position disc turret, tool holder: VDI40 DIN69880, integrated coolant system, dimensions X/Y/Z approx. 3000mm/2000mm/2000mm, weight approx. 4300kg-4500kg. Inspection by appointment possible. Dcedoykutxepfx Aifsk

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, overall weight: 3,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Weiler E55X1000 features maximum turning diameter of 315 mm and a a center distance of 1100 / 2100 mm. It is equipped with a Sauter 8-fold tool system and a spindle speed range of 1 – 2500 rpm. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details regarding this machine. • Internal taper: Metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Maximum turning diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: Sauter 8-fold • Number of tool positions: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of face slides: 1 • Center distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Continuous duty speeds (S1):Gear stage I: 89 rpmGear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: Ball screw in Z axis makes noise, but dimensional accuracy is not affected Dcedpfx Aoy Em A Aeifsk Additional equipment • Extraction system Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2003, operating hours: 56,146 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, overall weight: 5,100 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis FEHLMANN Picomax 90-M was manufactured in 2003. It features a maximum spindle speed of 18,000 rpm and a table size of 920 x 380 mm. The machine offers impressive X-axis travel of 700 mm, Y-axis travel of 420 mm, and Z-axis travel of 610 mm, accommodating a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FEHLMANN Picomax 90-M vertical machining centre we have for sale. Contact us for further details. • Table size: 920 × 380 mm • Distance between table and spindle: min 94 mm / max 704 mm • Max. workpiece weight on table: 250 kg Additional equipment Dcodpezlhu Rjfx Aifjk • Dividing head, 4th and 5th axis: FEHLMANN ATS 160