Cnc lathe

SFM CHT-60

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Kjdpexgdfbefx Aaxswt Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 925 mm, turning length: 2,800 mm, turning diameter: 1,200 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, CNC Siemens 840D 48-tool changer, Capto C8 tools chip conveyor Kwodpfx Aaswzyn Rexst Forkardt 400MM chuck, 2 hydraulic steady rests SMW Autoblok capacity 2800x1250MM, spindle bore 132MM weight 23,500 kg

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Kedpfjxc In Sex Aaxowt Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: excellent (used), Brand: GEMINIS Model: CNC 4 PLUS 620 x 2000 Cnc : FAGOR Distance between points : 2000 mm Height of centers : 315 mm Max. turning diameter : 620 mm Swing over saddle diameter : 370 mm Kwjdpfxjwznp Ne Aaxjt Bar passage : 80 mm Precision swivelling turret: 1st speed range: 0 to 355 rpm 2nd speed range :0 to 1800rpm Tailstock : Morse 6 Main motor : 15 kw Max. Piece weight : 2.560 kg Tailstock quill diameter : 140 mm Machine size (L x Wx H): 4300x 1900 x 1800 mm

Condition: used, Year of construction: 1984, serial number 1113-23 Kwedpfx Aasvxltujxot turning length 500 mm turning diameter 220 mm chip conveyor ja kW Werkzeugwechsler 12-fach spindle turning speed range 5000 U/min tail stock automatisch

Condition: excellent (used), Year of construction: 2020, spindle bore: 132 mm, travel distance X-axis: 350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 3,060 mm, Tool eye Samchully 3 chuck 400 mm SMW Steady rest 35 - 340 mm Chip conveyor  AR Filtration system 20 m3 Optional WTO Tooling package Optional WTO Driven tool holders  Max. turning Ø: 975mm X-Axis: 350mm Y-Axis: 200mm Z-Axis: 3060mm Spindle bore: 132mm Speedrange: 2000Rpm Spindle power: 30kW Kwodex Ei Rvspfx Aaxet ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:10kW Chip conveyor: Yes Tool eye: Yes Pinole taper: Mk5Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 6800mm Width: 2374mm Height: 2660mm Weight: 22000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2042.6958-01, quill diameter: 160 mm, overall weight: 8,000 kg, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, distance between centers: 3,000 mm, VDF lathe type 800 DUS in very good condition. Specifications: Heidenhain Manual Plus 620 control Speed 6-1600 rpm (2 steps) Swing over bed 800 mm Spindle bore 128 mm Kodpfxox S Nv Sj Aaxswt Distance between centers 3000 mm Spindle mounting DIN 55027 No. 11 Year of manufacture 2017 Dimensions 6,320 mm (including chip conveyor + 1,200 mm) 2,930 x 2,440 mm Weight 8,000 kg Accessories: Heidenhain Manual Plus 620 control Steady rest 250-500 mm 4-jaw chuck 700 mm 4-jaw chuck 450 mm 3-jaw chuck 315 mm Parrat tool holder with 4 holders

Condition: used, SAMSUNG SMEC PL-60L Ø1,030 x 3,200 mm / 2016 Model Machining Capacity / Fanuc Oi TD CNC Controller • Swing over bed: Ø 1,030 mm (32 inch hydraulic chuck) • Swing over cross slide: Ø 800 mm • Maximum turning diameter: 530 mm • Maximum machining diameter: Ø 900 mm • Maximum turning length: 3,200 mm (Ø 45~310 mm with hydraulic steady rest) • Maximum chuck machining diameter: 139.5 mm Axis Travel • X-axis travel: 470 mm • Z-axis travel: 3,270 mm Spindle • Spindle bore: 1,500 mm • Spindle nose size: 21" Kjdpjx Scprefx Aaxswt • Spindle nose type: A2-15 • Spindle through hole diameter: Ø152 mm Turret (Standard) • Number of tool stations: 12 (Standard) • Tool shank size: □32 mm • Boring bar shank size: Ø80 mm Tailstock • Tailstock travel: 3,270 mm • Quill diameter: Ø180 mm • Tailstock taper: MT-6 (built-in) • Tailstock stroke: 150 mm Power & Installation • Power requirement: 65 kVA • Machine dimensions (L × W): 7,400 × 2,760 mm • Machine weight: 22,000 kg

Condition: new, Year of construction: 2025, turning length: 2,000 mm, turning diameter: 660 mm, center width: 2,000 mm, CNC Cycle Lathe FTL660-2000 – Heavy-Duty Machining with Precision The FTL660-2000 from the FLASH series by GreMaT is a powerful CNC cycle lathe specifically designed for heavy-duty cutting applications. Featuring a 500 mm wide machine base, a solid monoblock cast bed, and flexible spindle options, it delivers maximum stability and precision for the most demanding turning operations. Combined with the Siemens 828D control, the machine stands out for its ease of operation, short setup times, and high process reliability—ideal for manufacturing companies that prioritize productivity and dependability. FTL660-2000 Highlights • Immediately available – secure your machine directly from stock (otherwise approx. 6 months delivery time). • Robust & massive – 500 mm wide machine bed and monoblock construction for maximum rigidity. • High flexibility – spindle bores up to Ø120 mm, various speed ranges. • Heavy-duty linear guides – stable and durable even with large workpieces. • Centrally mounted ball screw – higher precision, reduced wear. • Versatile tooling concept – 4-station tool post, 8-station turret, or gang tooling. Key Technical Data (Excerpt) • Max. swing over bed: Ø700 mm • Max. swing over cross slide: Ø480 mm • Max. workpiece length: 2000–3000 mm (depending on configuration) • Spindle bore: Ø120 mm • Bar capacity: Ø110 / Ø135 / Ø162 mm • Spindle nose: A2-11 • Spindle speed: 1000 / *800 rpm • Spindle motor: 15 / *18.5 kW • Tool positions: 4+2, *8+2 • Tailstock: manual or hydraulic, travel 100 mm Kwedow T Ttvspfx Aaxot • Bed width: 500 mm • Weight: approx. 7,600 kg Equipment includes: • Siemens 828D control + CTB driver + CTB motor • 15'' display, ShopTurn function • Taiwan linear guide + ball screw • A2-11 belt-driven spindle, max. speed: 1000 rpm • Spindle bore: φ120 mm, through hole: φ110 mm • Main servo motor with 22/30 kW • 15-inch Taiwanese hydraulic hollow chuck + hollow cylinder • 12-station servo turret, 100 mm center height • MT5 hydraulic tailstock • Manual steady rest (circular) • Air-conditioned electrical cabinet • Electronic handwheel • Automatic lubrication system • Automatic coolant system • Three-color warning light • Work light • USB and Ethernet connectivity • Foundation pads • Tools and toolbox • CE certificate Experience it live at EMO 2025! See the CNC cycle lathe FTL660-2000 live at EMO 2025. Experience its robustness, precision, and performance first-hand—and secure your production edge. 👉 Get your free EMO tickets now and schedule a personal appointment! Why choose the FTL660-2000? ✅ CNC cycle lathe with high machining capacity ✅ Immediately available—or approx. 6 months lead time for new orders ✅ Siemens 828D control for intuitive operation ✅ Ideal for heavy-duty machining of large workpieces ✅ Solid cast machine bed with integrated recirculating ball screw for increased rigidity and stability

Condition: good (used), In good technical condition and fully operational. Year of manufacture: 1974, with an overhaul including comprehensive modernization (retrofit) of the CNC control system, complete with automatic central lubrication for the axes and hydraulic systems, water cooling, conductive rollers with brushes for a system allowing the possible welding of the workpiece, and complete protection against flying chips. Heidenhain manual plus 4110 control system. Swing diameter over bed: 1,250 mm and over support: 900 mm. Max. workpiece weight: 14,000 kg. Max. workpiece length: 3,000 mm. Machine weight: 16,350 kg. Kwodpfox Ttlaex Aaxot Machine power: 80 kW. Machine dimensions: Width 3,000 mm, Height 2,100 mm, Length 8,000 mm. Accessories: faceplate including handles, steady rest, raised tool head, universal chuck. Complete technical documentation, service history, and maintenance and overhaul records are available.