Used Folder gluers for sale (31)

Condition: like new (used), Year of construction: 2015, LAMINA Crash-Lock Gluer CLG 1816 Year 2015 Nordson electronic gluer: 3x hot melt nozzles + 3x cold glue nozzles - Longitudinal night gluing - 3-point gluing ( Crash bottom) - 4-point gluing ( servo motor ) - Maximum format: 1800 mm wide and 1600 mm long - Minimum format: 460 mm wide and 200-300 mm long - The four-point device of this machine has been completely replaced in 2020 by servo-controlled overhauling hooks, which offer the possibility of a minimum erecting height of 50mm for four-point trays. Qd09F

Condition: good (used), Year of construction: 2021, Automatic folding box gluing machine Dq9Jnt Manufacturer: Eterna Type: Efold 1100 Elite Year of manufacture: 2021 For micro-corrugated cardboard and cartons Cardboard: 200-800 g/m² Corrugated cardboard: N / E / F wave Belt speed: 320 m/min (420 m/min as an option) Jogging speed: 20m/min. Main motor: 11kW Total length: 12.7 x 2.6 m Total weight: 7 tons Max. cutting width: 1100 mm Incl. high-pressure gluing system ERO-TE for folding box gluing machines 4 cold glue nozzles 070225

Condition: ready for operation (used), Year of construction: 1992, Corrugation types: F to E corrugations, B-corrugation: low mileage. 4.1 Normal folding carton: cardboard and flute caliber: 0.25mm-3mm, grammage: 200g-990g/m², indent: 40mm/900mm, max. glue flap up to 4th crease: 990mm. Folding bottom folding box: caliber: 0.25mm-3mm, grammage: 250g-900g/m², indent: 55mm/900mm, width min./max.: 190mm/1080mm, glue flap: 10mm-40mm, max. glue flap up to 4th creasing: 990mm. Documentation available. On-site inspection is possible. 7Ay8Eoxiw

Condition: good (used), Year of construction: 2015, folding and gluing in a straightline 1-2-3-4 point gluing box with automatic bottom and double wall and 4 corner boxes with servo backfolding for boxes made of 200 - 450 gsm cardboard + E and F flute corrugated board feeder: 3 KW feed AC motor for independent blank spacing 8 feeder belts (26 mm) motor vibrating feed pile support for separating blanks and eliminating skips and doubles 2 different sized pile supports dual diamond tipped feed gates adjustable in four directions, providing precise control on all blanks hopper sides independently adjustable in four directions modular feed carriers with individual belt tightening Optional Side Register System: the modular Omega Side Register System squares cartons prior to entering the prefold section, giving additional control over blanks. Two sets of upper and lower auxiliary carriers transport blanks through the section when the side register is not being utilized. the Side Register is located on the left side of the machine, can be easily converted to left or right side registration. easily adjusted to various material thickness 82 pieces of angled rollers 2 lower (24 mm), 2 upper (19 mm) belts 2 sets of extra carriers (put in use for lock bottom and tapered boxes when rollers are not used) spare rollers for different widths of glue flaps Bmkbm9Rw8E length: 1.000 mm Pre-Fold Sections: pre-break of the first creasing line up to 180°, 3rd creasing line up to 135° for straight line boxes third score belt 24 mm left and right hand glue flap breakers high speed third score opener Auto Bottom Unit: 2 lower and divided upper carriers 3 sets (9 pieces) of shoes in different sizes 6 pieces of folding hook assemblies various sized hooks located on PF1 and PF2 sections Servo Back Folding System for 4 Corners: Omega Servo Back Fold System provides consistent and uninterrupted 4 corner back fold function and allows folding of all types of boxes within the machine range. The operator simply inputs the flap length into the touch screen. The system determines which one of the 3 finger sizes to be used for the job. Each job is saved in electronic value memory for future orders 2 sets (6 pcs) of different sized, wooden (rock maple), folding shoes polyamide guides on the final fold section for 4 corner with lid located on PF1 and PF2 sections. Final Fold Section: long final fold to provide easy box flowing drop in center carrier in final fold with 24 mm lower and 19 mm upper belts folder belts with independently adjustable speed (20 mm and 30 mm) chromium plated and sliding folding rollers with different angles which can be adjusted at four different positions easily adjustable lower left hand glue pot with 226 mm Ø wheel 2 standard changeable brass glue disks available from 2,5 to 13 mm polyamide guides two different sized multi positioned swords pneumatic squaring system for micro flute auto bottom boxes

Condition: excellent (used), Year of construction: 1987, Jagenberg Diana 65-1 Year: 1987 Refurbished Gm3F8O HSS System 3 hot melt guns 4 cold glue guns lower disc glue system 3 points in production Very good condition Available immediately

Condition: used, Year of construction: 2016, machine/vehicle number: 1037516, Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WSYear 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screenThe Lamina Gluer is a manual fed in-line folding, gluing and taping machine. Bjncqggypno By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1990, Condition: excellent (used), Diana Jagenberg 115-3 Cmd8Dl8Ife year:1990 -straightline -lockbottom -4 corner -6 corner -vibrator -kicker -counter -pre breaker without electronic gluesystem

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Manufacturer: Ropi germany Format / Working width: 60 x 170 mm Technical specification Ppzu7Tmlu machine suitable for small and very small products medium or small runs Paper/carton weight: 150 - 450 g / m2 Type of adhesive/glue: commercially available dispersion glue Glue unit: pneumatic controlled gluing unit with 2 gluing heads Speed-dial controlled Feeder: suction belt feeder Speed: max. 10,000 products / h Revised 2018

Year of construction: 1995, Condition: ready for operation (used), Working width: 1850mm, without accessories, spare parts or documentation, has been maintained regularly, the machine is functional for the first and second shaft, speed depends on operator and size of the package. G0Wxp07

Condition: good (used), Year of construction: 2014, working widht 1100 mm working speed 20 - 400 m/min Max. thickness of cartboard 6 mm Year of manufacture REV 2014 - Feed section - Side register unit (on both sides) - 4-6 Corner unit - Pre-fold section - Lower glu unit - Upper glu unit - Folding section - Delivery section Sufzginvo - Stacker unit - Roughener for film-laminated material - With hhs nozzle gluing unit (incl. 3 nozzles) Speed variable 20 - 400 m/min Karton 200 - 600 gsm Max. thickness of cartons 6 mm Corrugated cardboard types B-C-E-F

Condition: good (used), Year of construction: 1995, production of packaging, cartons and promotional materials, boxes options: longitudinal, top, 3-point, multi-point gluing max. output: 450 m/min DIANA 115 MATIC – automatic pre-setting of the machine according to the size of the folding box HHS – XTEND 2 – detection of binary codes, detection of glue on nozzles, 6x nozzles HHS – XTEND 2 semi-automatic box gluing spare belts normal folding boxes: thickness from 0.25 to 3 mm weight: from 200 to 900 g/m² width min. x max.: 145 x 1150 mm Dq2Ozr glue tab: 5 - 40 mm folding box bottom: thickness: from 0.25 to 3 mm weight: 250 - 900 g/m² min. x max. width: 190 x 1080 mm adhesive tab: 10 - 40 mm

Condition: excellent (used), Year of construction: 2022, Detailed specs in the pictures and below. Description: 1.Equipped with full color touch screen monitor, main machine, transfer and conveyor can control the speed automatically and synchronization trace parameter setting system. 2. The machine adopt movable and adjustable operating function in each section .Equipped with elaborate tooth lever design. It is simple, convenient and efficient for one man operation. 3. High power stepless speed control frequency conversion and high-efficiency power motor, the highest speed can reach 400 meters/min, power transmission adopts powerful belt transmission, with low noise, high efficiency, easy maintenance and economic efficiency. 4. Each functional components of the machine adopt modular design, which is convenient to assemble, convenient to replace and debug products, convenient for beginners to master technology, and easy to learn. 5. Unique design of the upper and lower glue tank and coordinate with the need of products. 6. Compression and conveyor section equipped with adjustable the pressure design according to the needs of the products. Equipped with a set of special soft belts to ensure uniform pressure and perfect quality. 2Ot2Ugv0 7. The machine adopt photoelectric counting, which can be used for total or quantitative counting, and equipped with kicker mark recognition device.

Year of construction: 1986, Condition: good (used), Window Patching Kohmann F 1010/2 Year 1986 machine as it is – will be cleaned – with Kohmann suction belt feeder – with adjustable chain station squaring section – with suction table Cqdfbe20Q – max format 1000 x 700mm – min format 100 x 80mm – Variable cut off length of foil by means of the change gears – with stereo cylinder and glue-impression roller – The glue stereo can be made ready outside the machine. The stereos are glued onto a carrier film which then can be easily mounted onto the stereo cylinder in the machine. In this way the stereo can be stored for reuse on repeat jobs. – with delivery station – electrical equipment for 380 v, 50 cycles AC – with electrical push-button controls, – with pressure and vacuum pump incl. motor

Condition: excellent (used), Year of construction: 1997, max. 790 mm, min. 45 mm, straight line double wall 3 points crash lock Brand new 3 point glue device Dof9Nl

Condition: used, Year of construction: 1985, Jagenberg Diana 100-1 Folder Gluer machine currently in production! Year of production: 1985 Maximum Working Size: 1000 mm Minimum Working Size: 45 mm Straight Line Gluing 7Dwcps0Nwh Crash Lock Bottom Device Kicker & Counter Feeder

Condition: excellent (used), Year of construction: 1992, STC-Ref:G-411-0011 Jagenberg-Diana-115-3 ,Year: 1992 format: 145 x 1150 mm equipped: - 2 transferring stations - Pre breaker - grammature 200 - 900 gr/m² C0Fpt2Zhiw - Gauge 0,25 - 3 mm - material width 145 x 1150 mm - Adhesive flap 5 - 40 mm - clueing seam control - linear delivery - inserting - Folding station - upper gluing device - collating and pressing station - bottom gluing device - lockbottom carton gluing - infeed unit format 55 x 900 mm - F- E- B- flute corrugated device --> available: 02/2025

Condition: used, Year of construction: 1994, Bottom lock 4/6 gluing points Ero Gluing system (year 2001) Can be used with solid board from 200gr to 1000gr Bijm8Veau3 Cardboard until 12mm

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, type of input current: three-phase, total width: 7,000 mm, total length: 10,000 mm, total height: 2,500 mm, input voltage: 380 V, compressed air connection: 1 bar, overall weight: 22,000 kg, Sloter with reception from stacker, maximum size in passage 3300x2500mm. The machine supports E,B,C,EB,BC waves. The machine is in very good condition, All settings are from the touch panel of the machine or it is possible to set manually. The maximum speed of the machine is 150 pieces per minute. The controls and inverter of the machine are Siemens. Br2Bnnp29Fc The reason for selling is to replace the machine with a larger model. Delivery at the expense of the buyer. I will answer all additional questions in a private message.

Condition: good (used), Year of construction: 2011, LAMINA GLUELINE 3200 GL - Year of construction:2011 U2Wcl7Lsup - Sheet size min.: 500 x 700 mm* - 2x - Sheet format max.:1600 x 1600 mm* - 2x - Output:up to approx. 1000 pcs/h - Material types: F, E, B, C, CB, EB and EE flute, 1-piece and 2-piece bases - Glue type: Hot-melt (2-hot-melt valves) - Application type: Bead - Stacking height incl. pallet: all heights possible (delivery specifications)

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, type of input current: three-phase, total width: 1,500 mm, total length: 10,000 mm, total height: 900 mm, input voltage: 380 V, warranty duration: 1 months, Vega 750, Minimum box size folded: 60 mm -Maximum open box size: 750 mm Max speed: 400 m/min Lock bottom Straight line cold glue ideal for stretched and corrugated cardboard (up to low wave) FOLDER/GLUER VEGA 750 YEAR 1990 Nº Serial: 1300 750mm, Lock Bottom, Cho0Kc37Ms Straight line, Cold glue. _____ Box folding and gluing machine VEGA 750 Year of manufacture 1990 Minimum size of a folded box - 60mm. Maximum format of an open box - 750mm Maximum speed 400m/min Gluing : line, automatically closed bottom. Cold gluing with discs. Machine ideal for solid, microwave and corrugated cardboard. _____

Condition: new, Year of construction: 2024, Maximum Paperboard Size: 650X700mmMinimum Paperboard Size: 100X50mmApplicable Paperboard: Paperboard 250g-800g; Corrugated paper F, EMaximum Belt Speed: 450m/minMachine Length: 16800mmMachine Width: 1350mmMachine Height: 1450mm Total Power: 18,5kWMaximum Displacement: 0.7m³/minTotal Weight: 5500kg Ielffehnp

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, Dear interested party, please take the opportunity to view the machine during Drupa. We are happy to arrange appointments at short notice. Your WS Quack + Fischer team Manufacturer: Jagenberg Machine type: Folding carton gluing machine with packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of construction: Packing machine 1985, overhauled 2020 Location: 41751 Viersen, NRW Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing rule - Module 150 with servo-motor-driven overfold - Bottom gluing unit with 5 mm gluing disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - digital position sensor - Electronic control, incl. counter and outfeed control in start/stop mode 2Bsximco - Top gluing unit (year of manufacture 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, order memory, including stainless steel piston pump piston pump This machine is equipped for processing side-glued folding cartons, folding bottom cartons, folding telescope cartons with single fold and 4-point erecting cartons. A compressor is not included in the scope of delivery. Other: The machine is in very good condition, ready for operation and can be inspected during production by prior arrangement. Availability: immediately

Year of construction: 2023, Condition: new, Horizontal cartoning machine for inserting products into folding boxboard including hot glue module for gluing the boxes. Suitable for a variety of products (solid products) such as tubes, bottles, ampoules, vials, blister packs, cosmetic jars, vacuum packed food. A brochure or leaflet can be inserted additionally to the product for e.g. instructions for use, instructions or similar. The fully automatic packaging process includes feeding of the products, erecting of the folding boxes, insertion of the products, insertion of the brochure or leaflet, closing and gluing of the box and out feeding it. Within the range quick change to different carton sizes simply by adjusting the parameters (no format or tray changes necessary). PLC control, touch screen operating monitor (menu available in different languages e.g. English, German etc.). - Specifications: Dimensions of the folding box: L(50-200)xW(20-85)xH(15-75)mm; requirement carton/paper thickness of the box (min-max): 250-450g/m max. cycle of the machine in neutral: 100 cycles/min; power supply: 380V, 3P; compressed air and compressed air consumption: 5-8bar, 0,16m³; dimensions of the machine LxWxH: 3500x1500x1600mm; weight: 1200kg. Izg0Fah Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 1044595, Format range: max. 1050 mm / min. 50 mm Features: longitudinal seam, folded bottom, double edge, electronic top gluing unit, 4 channels with 2 application heads, bottom gluing unit on the left, vibrator at the feeder, Dpf7Nd right and left pre-breaker, kicker, counter, digital position indicators, motorized threading station, additional middle transport in fold, blank monitoring, clocked pressing belt. Overhaul 2023: cleaned, checked, painted and equipped with new feeder and transport belts. All ball bearings renewed. Other: Machine can be viewed by arrangement

Condition: excellent (used), Year of construction: 2004, VEGA PEGASSO 145 Production year:2004 Kind of boxes: straight line / crash lock bottom / 4 corners / 6 corners / doble wall boxes Ueb8Tsl87X Materials: cardboard gr 200 - 800 / corrugated board ( waves: E-F-N-B ) in production actually Available in end of September2024