Center lathe

SCHAUBLIN 125 C

Condition: excellent (used), Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Hnodpfx Aotzxh Teigjt Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Hnodpjiknv Ejfx Aigjt

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Hnedpfjy Avyxox Aiget Röhm chuck 125mm documentations

Condition: excellent (used), Very good condition Digital, Multifix, collets W32 Hnedpfxoy Al Uxj Aigst

Year of construction: 2007, condition: excellent (used), 603 LBH Technical Description Main Technical Specifications • Minimum sawing capacity at 90° min.mm 60 x 10 max.mm 610 x 310 Hnsdpfxel Si Uue Aigot • Sawing capacity at 45° mm 400 x 310 • Sawing capacity at 60° (available on two flanges only with relevant option) mm 250 x 250 • Mitering angles +45° / -60° • Toothed band size mm 34 x 1.1 • Toothed band speed m/min. 78 • Band motor power kW 4 • Working level height mm 850

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Hnsdpfx Ajd Eaukoigjt

Year of construction: 1997, condition: ready for operation (used), - USED - CONVENTIONAL LATHE CENTRE HEIGHT: 102 mm Hnedpfxjyvlxqs Aigot DISTANCE BETWEEN CENTRES: 450 mm MAX TURNING DIAMETER OVER BED: 200 mm MAX TURNING DIAMETER OVER CARRIAGE: 120 mm BAR CAPACITY: 25 mm SPINDLE: 50 - 5000 rpm; 3 kW TAILSTOCK TAPER: CM 2 QUILL DIAMETER: 30 mm QUILL TRAVEL: 80 mm TURRET HEAD: MULTIFIX OVERALL DIMENSIONS: 1500 x 510 x 1550 mm

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters Hsdpfxou U Iixj Aigent *

Condition: reconditioned (used), Year of construction: 1984, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1984 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 84-5532 with guarantee Accessories: - Machine stand - Microscope with support - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch Hsdsqctp Sepfx Aigsnt with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate - Used, as seen -

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 320 mm, total height: 2,245 mm, total width: 1,340 mm, total length: 1,140 mm, table width: 240 mm, table length: 1,000 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, rotational speed (min.): 100 rpm, overall weight: 1,000 kg, working range: 650 mm, input voltage: 400 V, distance table to spindle center: 370 mm, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Drilling capacity in steel ----- 50 mm Milling capacity in steel ----- 25 mm Face milling capacity ----- 100 mm Longitudinal travel (X) ----- 585 mm Transverse travel (Y) ----- 185 mm Vertical travel (Z) ----- 320 mm Horizontal motor ----- 1.5 KW Vertical motor ----- 2.2 KW Horizontal milling spindle ----- 60 ~ 1350 rpm (9) Vertical milling spindle ----- continuously variable 100-600 / 350-2000 rpm Spindle mount ----- ISO 40 Table ----- 1000 x 240 mm Weight ----- 1000 KG INCLUDED * DELTA frequency inverter * 3-axis digital readout SINO * Automatic longitudinal and transverse feed of the worktable * LED lighting * Cooling system * Deluxe control cabinet * Tilting milling head left/right 0 - 45 degrees Hnodpfx Aoga Twfjigjt * Rotating worktable * Various holders in a case