Finish turning lathe, secondary lathe

SCHAUBLIN 102

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: BL 201273, Completely overhauled on a new workbench, with new paint and belt guard, and a new headstock. Gsdpj Ahxhijfx Aglokd Inventory No. 2240050, machine including: 1 NEW workbench 2000x800 mm with blue Urphen top 2000x800x50 mm      1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-20 tailstock with geared reducer, complete with tightening key, overhauled 1 overhauled cross slide 1 overhauled aligned steady rest 1 380V/50Hz/3ph motor, 2 speeds 720/1420 rpm - 0.9/0.6 HP 1 tensioner pulley with pulley and belt 1 W-20 dead center 1 set of 37 W20 collets 1 1x3 jaw chuck Ø 100 mm on W-20 flange and additional jaw sets 1 TRIPAN tool holder set including: -1 type 111S turret with stud - 2 tool holders 131 - 1 tool holder 131b - 1 double tool holder 132 1 self-centering drilling chuck, capacity 1-13 mm on CM2 taper 1 CM2 dead center TECHNICAL CHARACTERISTICS: Capacities: - center height 102 mm - distance between centers, W-type headstock, standard 470 mm - distance between centers, W headstock with reducer 375 mm - diameter allowed above the bed 200 mm - diameter allowed above the cross slide 120 mm Bench: - height x width x length 160x100x1000 mm cast iron bench with rectified dovetail profile Headstocks: - spindle nose for collets W-20 - bar passage through collet 14.5 mm - headstocks with reducer, ratio 1:5 Cross slides: - travel of longitudinal tool slide 90 mm - travel of transverse tool slide 100 mm - tool dimensions 12 x 12 mm Tailstocks: - internal taper of tailstock spindle Morse 2 - spindle travel, controlled by screw and handwheel 80 mm The technical specifications are provided without guarantee, subject to errors and omissions.

Condition: good (used), Center height: 102 mm Godpfxjz Hwffj Aglekd Distance between centers: 300 mm Maximum diameter above the carriage: 120 mm Maximum diameter above the bed: 200 mm Spindle bore: 20 mm Collet type: W20 Weight: approximately 450 kg Dimensions: L1200 x W600 x H1400 mm Base: cast iron Equipment: Tailstock, digital cross slide, Tripan turret, tool holder x 3, microscope, chuck, set of 2 drawers, set of collets.

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available Gsdpfx Ascuhvuegljkd BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Gkodpfsd Htvdjx Aglod Different "Schaublin 102" models in stock!

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Gjdpfx Ascpznhoglskd Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: good (used), Center height 102 mm Distance between centers 450 mm Gkedpfjcug H Ssx Aglod Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Different "Schaublin 102" models in stock!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 350100, spindle bore: 20 mm, turning diameter over bed slide: 200 mm, turning diameter over top slide: 120 mm, center height: 102 mm, feed length X-axis: 400 mm, quill travel distance: 90 mm, total length: 1,500 mm, total width: 510 mm, total height: 1,550 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 100 rpm, bed width: 130 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 100 rpm, type of input current: three-phase, overall weight: 660 kg, input voltage: 400 V, distance between centers: 450 mm, travel distance cross slide: 100 mm, Schaublin 102N-VM CF precision lathe in excellent condition, fully functional. The machine has undergone a geometric inspection (inspection report available). Included equipment/accessories: - W20 collet set - 4-jaw chuck - Tripan tool turret with tool holder Gkjdpfx Ajz E Dymegljd - 2 quick-change 6-jaw chucks - Drilling chuck - CCEA LED lamp - Gear set Machine available for viewing and testing at our premises in Switzerland. Price: CHF 29,900.– (excluding VAT) Loading and transport possible upon request.

Condition: used, TECHNICAL DETAILS - center height : 102 [mm] - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] Gkjdpfsw Ihttox Agled - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]

Condition: good (used), Lathe SCHAUBLIN 102N80, serial number 277444. Godpfxsztc Dvo Aglekd

Year of construction: 1987, condition: used, Schaublin 102N lathe Gkedpfx Aezlugyoglod