Cnc lathe

RAIS LTD T-5000

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Iijdpfx Asxtbf Eof Ueb Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. The weight of the machine itself is 44 tons, the total weight is 55 tons. Iiedpfsm H Unhex Af Usb I can send a lot of photos before dismentling.

Condition: not inspected (used), Year of construction: 1996, turning diameter over cross slide: 1,000 mm, turning length: 4,000 mm, turning diameter: 1,450 mm, spindle bore: 150 mm, rotational speed (max.): 560 rpm, overall weight: 20,000 kg, CNC NUM T Plus Capacity 4000 x 1450 mm on bed 1000 mm on cross-slide 4-jaw chuck 1200 mm Iiodpfx Aoyzhrkof Ujb Steady rest Automatic turret Set of tool holders Weight 20,000 kg

Condition: used, overall weight: 495,000 kg, Year of construction: 1991, Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Workpìece weight: 2500 kg Ijdpjv D Ddvjfx Af Usib Min length: 1500 mm Max length: 3000 mm Engine forge: 2 x 500 kW, 5500 V, 50 Hz Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Condition: new, Year of construction: 2021, functionality: fully functional, turning diameter over cross slide: 1,000 mm, spindle bore: 110 mm, turning diameter: 1,300 mm, turning diameter over bed slide: 1,300 mm, turning length: 6,000 mm, spindle speed (max.): 10,000 rpm, GURUTZPE GL13 PARALLEL LATHE (BRAND NEW) COMPLETELY NEW MACHINE TECHNICAL SPECIFICATIONS Brand: Gurutzpe Model: GL 13 Year: 2021 (Never installed) (0 operating hours) CNC: Fagor 8065 Swing over bed: 1300 mm Swing over carriage: 1000 mm Centre height: 710 mm Admissible weight without steadies: 10 T 4-position automatic turret (Barrufaldi 265) Bar passage: Ø 110 mm Manual 4-jaw independent chuck (MK) Ø 800 mm / A-11 Main motor power: 28/34 kW Chip conveyor Steady rest Ø 100 / 500 mm High pressure coolant 6 Bar PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, Iiodpfx Asy Efr Nsf Ueb HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: used, Year of construction: 2002, Tacchi HD-1450 CNC 725 x 4000 Heavy Duty Centre Lathe (2002) with Siemens Sinumerik 828D, 1000mm Diameter 4 Jaw Double Chuck, Chuck Bore Diameter 515mm, Barrufaldi Ban 400/4 4 Way indexing Tool Post (2) x 3 Point Steadies, Tailstock, Swarf Conveyor, Centre Height 725mm, Max Swing 1450mm Distance between Centres 4000mm, Main Motor 60kw, Max Workpiece Weight 15,000kg. Country of Origin: Italy Location: This lot is located in Aberdeen, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Isdpfx Asx T Ddaof Ueib

Condition: excellent (used), Face plate diameter 1000 mm Spindle mount DIN 55027 - size 11 Weight 520 kg Iodpfswgk Ilsx Af Ujib Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Saw blade dimension 4910x34x1.1 mm Cutting speed 20-120 m/min. Feed length single stroke 750 mm Max. Feed length 9999 mm Electrical equipment Supply voltage ~3x400V,50Hz,TN-C-S/TN-C Total connected load 8.5 kW Max. Fuse rating 25 A Protection class IP 54 Sound pressure level Production 280 78 dB Drive unit Type MDERAXX 100-32J B14 Supply voltage ~3x400V,50Hz Power 3 kW Nominal motor speed 1420 m/min. Hydraulic unit Type 92.001.048 (731-0507) Power 6.5 MPa/2.2 kW Coolant device Type 3COA4-12 Volume of coolant 40 dm3 MICRONISER possible Ijdpfotp Tcgjx Af Ueib Machine size LxWxH 2370x1600x2050 mm Machine weight Weight 1800 kg

Condition: used, Year of construction: 2021, Horizontal precision lathe M.C.M. ATL HEAVY PLUS 900x14000 with CNC control Fanuc Condition: Used Year of manufacture: 2021 Technical data: Centre height: 900 mm Swing diameter over bed: 1800 mm Swing diameter over cross slide: 1400 mm Iisdpfx Aoywhhksf Ueb Distance between centres: 14000 mm Max. workpiece weight between centres: 15000/18000 kg Bed width: 1100 mm Number of bed ways: 3 (2+1) Equipment: - FANUC CNC control, model FANUC 32i-B with MANUAL GUIDE i - Automatic turret with 12 positions and driven tool stations (Baruffaldi) MOD. TBMA 320 BDI 60 + C-axis - Chip conveyor (front) - Chip conveyor (rear) - 2 steady rests, diameter up to 600 mm - 2 steady rests, diameter up to 1100 mm

Condition: excellent (used), functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 4,000 mm, table width: 1,000 mm, CNC ECS 2301 (with the possibility of retrofitting) SPINDLE ISO 50 DIN 2080 taper AC motor: 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3.000 rpm Two automatic ranges TABLE (X-axis) Length 4.000 mm Width 1.000 mm Iiodpfjw Axmnjx Af Usb Travel 4.000 mm Number of T-slots: 7 Width of slots: 18 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' HEAD (Y-axis RAM) Y-axis travel 1.000 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' VERTICAL CARRIAGE (Z-axis) Z-axis travel 1.500 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' COLUMN (W-axis) W-axis travel mm 1.300 Working feed mm/1' 0 – 8.000 Rapid feed mm/1' - 15.000 ACCESSORIES: 40-position tool magazine