Welding turn table

Protec W 10 000

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Laodpfx Ameid Szco Tsc Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at an additional cost.

Condition: excellent (used), Welding positioner, Focker Strähler, 8 tons 8000 kg load capacity with hand and foot remote control Speed and inclination continuously adjustable 0.02 rpm to 1.1 rpm Diameter 1500 mm Height to center when tilted 1170 mm Height in horizontal position 1400 mm Length 2400 mm Ljdpfx Aef Ezdnom Toac Width 1500 mm Condition: visually and technically flawless, runs very quietly.

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390. Lajdpfxoid Szve Am Tsc

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg surface plate measures: 1500 x 1500 mm dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg Lajdpfxjgbt Sqj Am Tjc

Condition: new, Year of construction: 2024, Column lift turning device 3000 kg load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Load capacity 3000 kg Minimum working height: 1100 mm Laodpfx Aou Auumem Tjc Maximum working height 1600 mm Speed 1 rpm Vertical adjustment 500 mm Clamping plate diameter 800 mm Rotation 1.5 kW Lifting motor 2 x 1.5 kW Various column lift turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: new, table diameter 2000 mm Lasdpfxofv Ay Io Am Toc table load 10000 Kg swivelling range 0 - 130 Grad turning speeds 0,02 - 0,2 U/min height adjustment 1450 - 2200 mm max. torque on the faceplate 20000 Nm engine output 1,5 / 2,0 kW welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Column adjustment electrically driven on both sides Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Rotating drive: 2 x 2.2 kW Torque: 18,950 Nm Laodpfewtxxrsx Am Tsc Machine is also available individually as Mono model (more affordable) Optional with articulated flange (Cardan flange)

Condition: new, Year of construction: 2024, Welding rotary table, 3000 kg load capacity with hand and foot control Diameter 1400 mm Bore 100 mm Height 580 mm Speed, infinitely variable, 0 - 0.6 RPM Motor, AC 380 V Lodpsgfqliefx Am Toac

Condition: new, table diameter 2000 mm table load 10,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 20000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 3,0 + 4,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. Ljdpfxsfv Axis Am Tjac • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 3,000 kg, Column Lifting Rotating Device with 3-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 3000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Clamping Plate Diameter 600 mm Rotation 0.75 kW Torque 5180 N-m Lajdswih Dcepfx Am Toc 2 to 10-Ton Capacity Available Upon Request