Used Piston compressors for sale (123)

Listing

Request more images Request more images Already requested

1

D - Hessen

7,829 km

Piston compressor

Aircraft TANDEM 1003/500/10 H

€3,600

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Year of construction: 2015, CompressorYear of construction: 2015Stationary piston compressorwith 2 two-stage compressing two-cylinder high-performance units made of grey cast iron for a long service lifeMaximum volume flow 2 x 960 l/minFilling capacity approx. 2 x 750 l/minMaximum pressure 10 barVessel capacity 500 lMotor output 2 x 5.5 kWMains connection 400 VADimensions L x W x H 2020 x 570 x 1340 mmSound pressure level 1 m distance according to DIN 45635 83 dB(A)with base load change control1. Unit 428 operating hours2. Aggregate 418 operating hoursAvailability: short termLocation: Hochheim Gw9c2cu

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Borken

7,623 km

XS compressor

Mattei Maestro ERC 45 H

€9,242

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), We a Mattei compressor offer here Maestro XS. Mattei Maestro XS compressor Ieit9tb Model ERC 45 H Maximum operating pressure 10 bar(g) 145 psig Maximum quantity 7 m3/min 247.2 cfm Sound pressure level 84 dB(A) Rated power 45 kW 60 hp Voltage 400V Frequency 50 Hz 3-phase 1620 length mm, width 770 mm, height 1320mm Weight: 755kg Type: ERC 45 H Scope of delivery. (See pictures) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Minden

7,714 km

reciprocating compressor system BOGE

SCL 915-25

Price info Price info Already requested Call

Condition: used, Year of construction: 1998, machine/vehicle number: 372794, suction power 915 litres /min volume flow 680 litres / min super soundproof operating pressure 10 bar compressed air boiler 500 Liter - operating pressure 11 bar Bgpcvvzzlve - machine no.: FE41425 - with automatic drainage refrigeration dryer BOGE - type: DP9 / 352 - year of construction: 1998 - machine no.: 98/1/11869/21 - 230 V electrical data 400 V / 5,5 KW total weight approx. 700 kg documentation and inspection log books available

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Łabuńki Pierwsze

8,596 km

Piston compressor GIS 500 lt. 2x3.0 kW

GIS GS25/500/1080/TD 500 lt.

€1,200

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

volume flow: 1,080 m³/h, pressure: 10 bar, total length: 210 cm, total width: 66 cm, total height: 115 cm, motor power: 6,000 W, tank capacity: 500 l, pressure (max.): 10 bar, Condition: ready for operation (used), Year of construction: 2013, Equipment: Compressor, Good morning, We offer for sale an Italian reciprocating compressor from GIS equipped with two air delivery pumps and a 500-liter tank. To begin with, some useful information about the machine: * two motors of 3.0 kW each. Dm2gun * compressor capacity 1080 lt/min * tank with a capacity of 500 lt. * max working pressure of 10 bar * possibility of working on one pump only * original painting * 2013 year of production * overall dimensions 210 x 66 x115 cm ( L x W x H ). The machine worked until the last days worked, so it bears acceptable signs of use, nevertheless, it has undergone with us a comprehensive and rigorous inspection to eliminate any defects so you can be sure that the machine is in working order, requires absolutely no financial contribution and is immediately ready for further work. On site you will meet with carpenters who will be happy to pass on their knowledge and experience in working on such machines, and you will also have the opportunity to run and check the machine on our or your own material. For the machines we sell, we provide transportation with our cars, we organize transportation using courier companies or freight exchanges. Greetings, MDD wood machinery team

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Hornberg

7,932 km

Industrial piston compressor

Renner RIKO 700/270 ST

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2016, Motor: 400 V / 4.0 kW / 50 Hz Compressor speed: 940 rpm Suction capacity: 700 l/min delivery rate: 570 l/min max. pressure: 10 bar Lwyykb7y compressed air tank: 270 l, vertical galvanized weight: approx. 270 kg dimensions: 964 x 795 x 1912 mm (LxWxH) Cylinders/stages: 2/2 Sound level: 68 dB(A) Equipment: - Fully galvanized air receiver, manufactured according to AD2000 guidelines, with hand hole for easy inspections. - Low running 4.0 kW unit with German quality motor. - Condor pressure switch with hour meter - easy to read pressure gauge - very stable belt guard - double vibration damping between air reservoir and base plate and between air reservoir feet and base for effective reduction of unwanted vibrations.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Leipzig-Stahmeln

(dealership location)

7,960 km

SCHNEIDER Kompressor UNM 410-10-50 W

SCHNEIDER

€869

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, SCHNEIDER Kompressor UNM 410-10-50 W  Merkmale: Fahrbarer Kolbenkompressor mit liegendem Behälter Serienmäßig mit allen Sicherheitsarmaturen und elektrischem Anschlusskabel mit Stecker und Condor Druckschalter Druckluftbehälter ausgestattet mit Sicherheitsventil, Behälterdruckmanometer und Kondensatablassventil Der angeschweißte Heckgriff verbessert die Verlade- und Transportfähigkeit Vollautomatischer Betrieb durch Druckschalter mit Anlaufentlastung, Motorschutz und Ein-/Ausschalter Technische Daten: - Druck 10 bar - Ansaugleistung 410 l/min - Füllleistung 295 l/min - Antriebsleistung 2,2 kW - Spannung 230 V - Drehzahl 1210 min[-1] I2zvngaha - Beh.-Vol. 50 l - Gewicht 64 kg - Geräusch 96 dB(A) - Abmessungen (BxTxH) 820x410x810 mm - Gewicht (incl. Verpackung) 85.5 KGM - Artikel-Nr.: 1121490009

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

Mannheim

7,865 km

Piston compressor

BOGE Industrie-Kompressor TOP AIR SC 10

€20,000

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Model: BOGE TOP AIR SC 10 Technical highlights: Automatic operation, air-cooled, oil-lubricated CE mark for the highest safety standards Super-silenced for quiet operation Compact design: Motor and compressor on top of each other to save space Cooling and monitoring equipment mounted ready for operation Belt-driven via pre-lengthened high-performance V-belts Intake filter and intake duct in the cylinder head thermally decoupled Efficient heat dissipation through internal ribbing of the cylinder head High-performance aftercooler for intensive residual heat exchange Tongue valves for low-wear and friction-free operation Low residual oil content thanks to honed cylinder liners Smooth running thanks to mass balancing and electrodynamic balancing Vibration isolation thanks to elastic bearings Pressure detection via pressure sensor Precise pressure setting via the keypad Electromagnetic venting for load-free start-up Switch cabinet, fully wired, protection class IP 54 Surface coating in light blue, RAL 5012 With oil filling as standard Technical data: Maximum overpressure: 10.0 bar Suction capacity: 1330 l/min Effective delivery rate according to ISO 1217 Annex C at 80% maximum pressure: 1009 l/min Number of cylinders/number of stages: 3/1 Compressor speed: 920 1/min Rated power main drive motor: 7.50 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V AC / 24 V DC Easkrjd Sound pressure level: 70 dB(A) Dimensions (W/D/H): 830 / 1120 / 1570 mm Weight: 389.0 kg Invoicing: We would like to inform you that a detailed invoice can be issued for the appliance purchased. Our invoices comply with all tax regulations and contain all the necessary information for your accounting. Shipping information: Shipping is a flat rate and is negotiated individually. Please note that shipping can be organized by arrangement to meet your individual requirements.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Niederlangen

7,585 km

Compressors

Aircraft AIRPROFI 853/270/10 VKK

Price info Price info Already requested Call

Condition: new, 5,5 kW 10 bar - l 850 l/min 680 l/min Nx0kiwzz container volume 270 l 400 V 1200 x 800 x 1970 mm 204 kg Stationary piston compressor with refrigeration dryer, fine filter, Condensate conditioner for oil-water separation and automatic condensate drain

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Kunreuth

8,008 km

Kolbenkompressor AIRPROFI 703/270/10 H

Aircraft AIRPROFI 703/270/10 H Silent

€4,760

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Year of construction: 2021, Aircraft piston compressor AIRPROFI 703/270/10 H Silent including accessories (new, unused condition): Accessories: - Aircraft compressed air refrigeration dryer AD 36 - Steam trap AMD - AOWT 2 oil/water separator - Pre-/fine filter - Extremely quiet due to sound-insulated housing and additional silencer at the suction filter - Suitable for installation even in noise-sensitive areas and the direct working environment - Two-cylinder high-performance cast iron unit with low speed speed guarantees particularly quiet and low-vibration operation: Less wear and longer service life - Large fan impeller on the compressor and temperature-controlled temperature-controlled radial fan on the housing ensure optimum cooling of the entire the entire interior - Intercooler and aftercooler as well as an additional air duct between the motor and compressor reduce condensate formation - High-quality Condor pressure switch - Equipped with glycerine pressure gauge, operating hours counter and fault indication via LED lights - Quality electric motor with motor protection switch and start-up relief - Integrated phase monitoring - Device for easy tensioning of the V-belt - Service-friendly design - Ready for connection with all fittings and safety devices - Models with compressed air reservoir: Galvanized inside and outside Air reservoir with 15 year warranty against rusting through Dimensions and weights: Length approx. 1690 mm width/depth approx. 780 mm height approx. 1740 mm Weight approx. 262 kg Compressed air tank: Maximum pressure 10 bar Tank capacity 270 l Electrical data: Supply voltage 400 V Mains frequency 50 Hz Noise emission: Sound pressure level Lp 63 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Compressor: Compressor system HOS Bdeyuy2roee Suction capacity approx. 674 l/min Filling capacity approx. 550 l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

14

Wijchen

(dealership location)

7,560 km

Compressor, vacuum screw compressor Kaeser ASV 40

Kaeser ASV 40

€2,750

ONO VAT not applicable

Sales inquiries Send inquiry Already requested Call

Condition: used, Operating hours: 2,588 h, Vacuum screw compressor Kaiser ASV 40 SerialNo. ASV40-0687/00002 Fl2afzguf Capacity 285m&sup3 10 HP 400V, 15Amp Dimensions 1400x900xH1100mm, weight 460kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Atlas Copco piston compressor LE 5 - 10 UV bar TM i

Atlas Copco

€5,047

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Usable volume flow measured according to ISO 1217-3, Annex C: at operating overpressure 10.0 bar 6.7 l/s 0.40 m3/min at operating overpressure 7.0 bar 8.4 l/s 0.50 m3/min at operating pressure 4.0 bar 10.0 l/s 0.60 m3/min Power requirement at operating pressure 10.0 bar 5.22 kW Power requirement at operating pressure 7.0 bar 4.92 kW Power requirement at operating pressure 4.0 bar 4.27 kW Technical data: Suction pressure 1 bar Suction temperature 20 °C Relative humidity 0 % Oil filling quantity 1.4 l Fzgj3pw Sound pressure level, measured according to ISO 2151 80 dB(A) Tank volume 270 l Limit values: Operating overpressure 1 to 10 bar Intake temperature 0 to 40 °C Cooling air temperature 0 to 40 °C Electric motor data: Flanged three-phase motor with squirrel-cage rotor, protection class IP 55, insulation class F. Make Leroy Somer LS 100 L Rated power / rated speed 4.0 kW / 1500 min-1 Voltage / frequency 400 V / 50 Hz Dimensions, weights and connections: Length/width/height 1852 / 504 / 1082 mm Net weight 150 kg Compressed air connection G 1/2 By coupling the compressor block directly to the motor and using lightweight materials, we achieve excellent cooling properties. The LE/LT series is ideal for confined spaces. It can be used as a stand-alone solution, but can also be easily integrated into OEM / original equipment manufacturer products.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Leipzig-Stahmeln

(dealership location)

7,960 km

Kompressor UNM STS 660-10-270

SCHNEIDER

€2,485

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, SCHNEIDER Kompressor UNM STS 660-10-270 UniMaster STS, die Platz sparende Lösung mit stehendem Behälter! Serienmäßig mit allen Armaturen, wie Elektromagnetventil oder Druckschalter mit Entlastungsventil für vollautomatischen Betrieb, Motorschutz, Sicherheitsventil, Manometer, Rückschlagventil, Kondenswasser-Ablasshahn und Absperrhahn Keilriemengetriebenes 2-Zylinder-Aggregat mit zweistufiger Verdichtung für 10 bar Druck erhöht die Leistung und sichert einen hohen Wirkungsgrad. Zwischen- und Nachkühler sorgen für eine rasche Abkühlung der erzeugten Druckluft Großes Ventilatorschwungrad für optimale Kühlung Technische Daten: Myeypg - Druck 10 bar - Ansaugleistung 660 l/min - eff. Liefermenge 520 l/min - Antriebsleistung 4,0 kW - Drehzahl 1025 Upm. - Behältervolumen 270 l - Geräusch 78 db(A) - Abmessungen L=750, B=705, H=1800 mm - Gewicht 170 kg - Art-Nr.: 1121570213

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

2

Dietersheim

7,980 km

Piston compressor

Aircraft

€950

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

pressure: 10 bar, Condition: good (used), Equipment: Compressor, AirCraft craftsman compressor upright F0eme22ku

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

4

Gennep

(dealership location)

7,579 km

piston compressor

kaeser EPC 630-250

€850

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), piston compressor, 250l boiler, 600l/min year of construction 1991, serviced Cns8j8vz

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Raesfeld

7,629 km

Air compressor Compressor

18 kW

€2,500

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Piston compressor Bdyz2urq Engine power: 18 kW

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

7

Ourém

7,288 km

piston compressor

Dalgakiran DKAB30

€2,500

Fixed price VAT not applicable

Sales inquiries Send inquiry Already requested Call

pressure: 3 bar, pressure (max.): 3 bar, Condition: new, Year of construction: 2008, machine/vehicle number: 37505, Equipment: Compressor, Dalgakiran compressor model DKAB 30: - NEW Prwyspjq - Year: 2008

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Schneider UNM STS 580-15-270 - 470 l/min - 15 bar

Schneider Airsystems

€2,249

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: as good as new (ex-display), * HANDLICHER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 15 bar pressure increases performance and ensures high efficiency * Tank with baked-on inner coating * 15-year guarantee on tank against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced Hy7ezd0jv * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) * The space-saving solution with upright tank Technical data Pressure 15 bar Suction capacity 580 l/min Speed 915 min-1 Tank volume 270 l Weight 177 kg Noise 78 dB(A) Dimensions (WxDxH) 750x705x1800 mm Eff. flow rate 470 l/min Air outlet 3/4 "i Drive power 4 kW Please note that this item will be delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Leipzig-Stahmeln

(dealership location)

7,960 km

SCHNEIDER Kompressor UNM 510-10-90 D

SCHNEIDER

€1,299

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, SCHNEIDER Kompressor UNM 510-10-90 D Merkmale: Fahrbarer Kolbenkompressor mit liegendem Behälter Serienmäßig mit allen Sicherheitsarmaturen und elektrischem Anschlusskabel mit Stecker und Condor Druckschalter Druckluftbehälter ausgestattet mit Sicherheitsventil, Behälterdruckmanometer und Kondensatablassventil Der angeschweißte Heckgriff verbessert die Verlade- und Transportfähigkeit Circi28jdd Vollautomatischer Betrieb durch Druckschalter mit Anlaufentlastung, Motorschutz und Ein-/Ausschalter Technische Daten: - Druck 10 bar - Ansaugleistung 510 l/min - Füllleistung 390 l/min - Antriebsleistung 3,0 kW - Spannung 400 V - Drehzahl 1240 min[-1] - Beh.-Vol. 90 l - Gewicht 80 kg - Geräusch 97 dB(A) - Abmessungen (BxTxH) 1070x495x895 mm - Gewicht(incl. Verpackung) 70.0 KGM - Artikel-Nr.: 1121490141

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

13

Berlin

7,941 km

BOOSTER COMPRESSOR WITH AUTO CONTROL

SENSI BOOSTER-KOMPRESSOR BKU-32/1,5-13

€250,000

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Year of construction: 2022, The booster compressor is used to compress natural gas from low-pressure gas networks (0.05 - 2.0 bar) and make it available for further processing. For use in natural gas extraction and production as well as in the handling of liquefied natural gas (lpg). The compressor unit includes intermediate and final refrigerators, a lubrication system, moisture/oil separators, an electric drive and an automation system. The scope of delivery of the BKU-32/1.5-13 compressor includes: a welded frame with a frame equipped with a removable cover at the top to protect the unit from direct precipitation; two-stage piston compressor 3SGHI-32/l.5-13, driven by an electric motor, input and output buffer tanks of the first and second degree of compression; input filter; air cooling units; lubrication system for cylinder and rod seals; circulation lubrication system for the compressor movement mechanism; flushing, leakage and drainage system with flushing tank and dispersion plugs; piping system with shut-off, control and protection valves. Main parameters of the BKU-32/1.5-13 compressor 1. ambient temperature , ° С: -30....+40 2. gas pressure at the inlet to the booster compressor, bar: - Minimum: 0.45 Maximum: 0.5 3. maximum operating gas pressure at the outlet, bar: 12 4. gas inlet temperature, nominal temperature, °C: +15 5. capacity at standard conditions (Rabs. = 0.101 MPa, T = 293 K), at an inlet pressure of 0.5 MPa, Stm3/h: 2734±5% 6. outlet temperature of the gas, °C, max.: + 55 7. power consumption, KW, max.: 313 8. set drive power of the compressor, KW: 313 9. set power of the electrical equipment of the compressor, кВт: 325.25 Overall dimensions, mm, -L. 9390 - B. 2430 - H. (without candle) 2680 10. weight, kg, max.: 15500 11. service life: Ckzrh2gt - Average, years, min.: 20 - Service life until general overhaul, hours: 30 000

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Freiberg am Neckar

7,943 km

Air compressor water cooled

Haug kompressoren AG QTOX 120/65/35 WM-W

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2000, Offered is an air compressor of the brand Haug. The compressor is used and comes from a disassembly. 2vuefq All other details you can see in the pictures.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Leipzig

7,966 km

piston compressor

GKW 2HV1-80/106/1

Price info Price info Already requested Call

Condition: used, Year of construction: 1988, pressure capacity: bar tank: 300 l motor: kW volume capacity: 350 L/min connected load: 4,3 kW weight: 340 kg dimensions L x W x H: 1,9 x 0,6 x 1,2 m Compressor: Geraer Kompressorenwerk 2 cylinders; 350 l/min; pressure max. 2.1 MPa, nominal pressure 1.6 MPa Motor: ADDA Antriebstechnik GmbH speed 2.870 / 3.444 rpm; voltage 380V Boiler: Geraer Kompressorenwerk Ci2dgfcm97 size Ø 550 x 1800m, with 3/4" and 1/2" stop valve, pressure gauge Inspection until 07/2022 done

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Grenzach-Wyhlen

7,941 km

Compressor

Mehrer TZW70-55

€25,000

EXW Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: ready for operation (used), Year of construction: 2001, Equipment: Compressor, Discover the future of high-performance compaction with the Mehrer TZW70-55 system - optimised by Hankison SPX HDS1800 and Flair DDA270 Increase your production capacity and efficiency with the Mehrer TZW70-55 compactor, synonymous with robustness, precision and reliability. This unit is specially designed to withstand the most demanding industrial applications while ensuring optimum energy efficiency. Powerful compaction with the TZW70-55 unit: Experience a new level of compaction performance with the TZW70-55 unit. With an ingenious design that promises maximum flow rates and constant pressure, this unit is perfect for a wide range of industries, from food processing to pharmaceuticals. Condensate management with Hankison SPX HDS1800: The Hankison SPX HDS1800 dryer is a critical component of this package and ensures efficient condensate management. It guarantees that your compressed air is free of moisture, which prevents corrosion of your equipment and increases product quality. Optimum compressed air treatment with Flair DDA270: The Flair DDA270 compressed air treatment system rounds off this package and delivers clean, dry and oil-free air. Equipped with advanced filters and dryers, the DDA270 ensures that you always have the best air quality available for your processes. Kr09trsj8d Features and benefits: -Rugged construction: durable materials and components ensure a long service life and low maintenance costs. -Energy efficiency: Optimised design results in lower energy consumption and lower operating costs. -Flexibility: The system is adaptable to different operating conditions and load profiles. Quality assurance: Ensures consistently high air quality, essential for quality-sensitive production processes. The complete package for your needs: The interaction of Mehrer TZW70-55, Hankison HDS1800 and Flair DDA270 offers an unbeatable trio for your compressed air needs. This combination means not only simplified procurement and integration, but also synchronised performance and reliability. Secure your investment: invest in the Mehrer TZW70-55 system with Hankison SPX HDS1800 and Flair DDA270 to take your production to the next level. Contact us today to find out more You have a 14 day exchange right on our products. If a unit does not work, you can return it to us and get your money back.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Schneider UNM STS 660-10-270 - 520 l/min - 10 bar

Schneider Airsystems

€1,831

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: as good as new (ex-display), Exhibitor - Schneider compressor UNM STS 660-10-270 Condition: very good The space-saving all-rounder: The Schneider UNM STS 660 with upright design The Schneider UNM STS 660-10-270 compressor is the ideal solution for anyone looking for a powerful yet space-saving 400 volt compressor. The two-stage piston compressor with its upright design is the perfect all-rounder, especially for small and medium-sized businesses: thanks to the clever modular system of the Schneider UniMaster series, the stationary compressor can be extended at any time with a sound-insulating hood or a refrigeration dryer. There is a big plus point for the complete equipment: The Schneider UNM STS 660 includes all the necessary (safety) fittings. The advantages of the UNM STS 660-10-270 at a glance: * Powerful performance: up to 520 l/min effective delivery rate thanks to 2-cylinder unit * Upright design: space-saving due to small footprint and optimal arrangement * Low noise level: only 78 dB(A) thanks to low speed and low vibrations * Convenient maintenance: easy inspection thanks to practical hand hole opening * No rusting through: container with internal coating and 15-year guarantee * Universal use: for many applications (without permanent compressed air requirement) Technical data Schneider UniMaster STS-660-10-270: Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Tank volume 270 l Weight 170 kg Noise 78 dB(A) Dimensions (WxDxH) 750x705x1800 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4 kW Important: For compressors with a 4 kW motor, the regulations of the local electricity company must be observed. The standard equipment of the Schneider piston compressor UNM STS 660-10-270 * V-belt driven compressor: two-stage compression * Rubber oscillating elements on the feet: steady standing * Intercooler and aftercooler: rapid cooling Bikfkijllby * Condor pressure switch: high quality * Container pressure gauge: also included * Additional sleeves: Tank can be easily extended * Motor protection and safety valve: complete protection * Condensate drain cock and 3/4 inch stopcock: reliable sealing The Schneider Unimaster STS 660: Smooth running and top performance! This all-rounder not only impresses with its space-saving exterior thanks to its vertical design - its powerful interior also leaves nothing to be desired! The V-belt-driven 2-cylinder unit with its two-stage compression ensures a high level of efficiency - while running quietly at the same time. The intermediate and aftercooler as well as the large fan flywheel cool the compressed air produced. The result is impressive: An effective delivery rate of 520 l/min with a container volume of 270 liters. The STS-660-10-270 is impressive: Moderate noise level thanks to low speed The Schneider UniMaster STS-660-10-270 not only scores points in terms of design and performance - the low noise level of the UniMaster is also a clear advantage: the low speed of just 1025 rpm reduces vibrations and ensures that important components are subjected to less stress. A pleasant side effect is that the noise level of the unit is significantly reduced at low speed, ensuring that the UNM STS 660-10-270 is a

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Leipzig-Stahmeln

(dealership location)

7,960 km

Kompressor mit Kältetrockner UNM STS 660

SCHNEIDER

€3,899

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, SCHNEIDER Kompressor mit Kältetrockner UNM STS 660-270 XDK UniMaster STS, die Platz sparende Lösung mit stehendem Behälter! Serienmäßig mit allen Armaturen, wie Elektromagnetventil oder Druckschalter mit Entlastungsventil für vollautomatischen Betrieb, Motorschutz, Sicherheitsventil, Manometer, Rückschlagventil, Kondenswasser-Ablasshahn und Absperrhahn Keilriemengetriebenes 2-Zylinder-Aggregat mit zweistufiger Verdichtung für 10 bar Druck erhöht die Leistung und sichert einen hohen Wirkungsgrad. Zwischen- und Nachkühler sorgen für eine rasche Abkühlung der erzeugten Druckluft Großes Ventilatorschwungrad für optimale Kühlung Bh29yk7 Mit Kältetrockner und Umgehungsleitung Mit Komplettmodul Öwadry, bestehend aus: Kältetrockner, Vorfilter und Öl-Wasser-Separator (nur bei DKS-Version) Sicherheitswanne optional erhältlich Technische Daten: - Druck 10 bar - Ansaugleistung 660 l/min - eff. Liefermenge 520 l/min - Antriebsleistung 4,0 kW - Drehzahl 1025 Upm. - Behältervolumen 270 l - Geräusch 78 db(A) - Abmessungen L=945, B=705, H=1800 mm - Gewicht 206 kg - inkl. Kältetrockner D - Art.-Nr.: 1121570207

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Velen

7,625 km

Compressors

UWM 7.5/690/270 400V

Price info Price info Already requested Call

Condition: new, feed pressure 13 bar Effective free air delivery 690 L/min Receiver capacity 270l / 16bar l / bar weight of the machine ca. 199 kg. motor 400V / 5,5KW V / KW range L-W-H 1,7 x 0,6 x 1,27 mm Hpofzbt

Price info Price info Already requested more

Listing

Wiefelstede

7,607 km

Building compressor 3.1 m³/min

Atlas-Copco XAS 55

Price info Price info Already requested Call

Condition: used, Screw Compressor, Air Compressor, Air Compressor, Trailer Compressor Rgzbt -Manufacturer: Atlas Copco, mobile compressor type XAS 55 -Volume flow: max. 3.1m³/min -Pressure: 7 bars -Engine: Deutz F3L 1011 F 30 kW -Drawbar: adjustable in height -Dimensions: 1330/2230/H1800 mm (drawbar folded up) -Weight: 814 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Werlte

7,605 km

Compressor plant Kaeser

Kaeser Komplett Anlage

Price info Price info Already requested Call

Condition: like new (used), Year of construction: 2020, Manufacturer: Kaeser Year of manufacture: 2020 Condition: very good, like new Compressor unit consisting of: Compressor, type N502-G, year of manufacture: 2020, refrigeration dryer type THP50-50, year of manufacture: 2020, compressed air tank year of manufacture: 2020, capacity 500 l, oil / water separator. All components are mounted on a frame. Bb2wgny7o0l

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Stary Sącz

8,541 km

Piston compressor 40 bar, 255 m3/h

JP SAUER & SOHN 310L-100

Price info Price info Already requested Call

Condition: used, Year of construction: 1998, Piston compressor from the professional company J. P. Sauer & Sohn GmbH Model: 300L-100 S0vu9 Year of manufacture: 1998 Spins 1470/min Direction of rotation: right Capacity: 255 m3/h Pressure: 40 bar Power demand: 55 kW Mileage: 21,475 hours

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Schneider compressor UNM STS 780-15-500 1121580539

Schneider Airsystems

€3,503

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, NOTE: New version! * HANDLICHER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Picture may differ from the original --> Original picture follows. Features: * V-belt driven 2-cylinder unit with two-stage compression for 15 bar pressure increases performance and ensures high efficiency * Tank with baked-on inner coating * 15-year guarantee on tank against rusting through Bikfnbwmcsw * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) * The space-saving solution with upright tank Technical data Pressure 15 bar Suction capacity 780 l/min Speed 830 min-1 Tank volume 500 l Weight 294 kg Noise 80 dB(A) Dimensions (WxDxH) 975x850x2020 mm Eff. delivery rate 640 l/min Air outlet 3/4 "i Drive power 5.5 kW Please note that this item will be delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

9

Marthalen

7,994 km

Piston compressor

Atlas Copco Wärmerückgewinnung ER 90

€8,500

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

total length: 195 cm, total width: 150 cm, total height: 150 cm, Condition: like new (used), Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor. Turn your water-cooled oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw L0qcdrzq Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Was almost never used - misplanning! Unfortunately, no documents more available.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Unterschleißheim

(dealership location)

8,125 km

Compressor

AiRKO AiRKO 609-D-90 Verz.

Price info Price info Already requested Call

Condition: used, Year of construction: 2016, 1450 1/min feed pressure max. 10 bar volume capacity 0,620 / 0,423 m³/min Bes0dy2kgrm tank capacity 90 l total power requirement 3 kW weight of the machine ca. 140 t dimensions of the machine ca. 1,35 x 0,80 x 1,15 m

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Scherstetten

8,077 km

Piston compressor

Remeza SB4/F-500.ABE75

€1,900

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Original price: approx. 2.300€! New two-cylinder piston compressor brand Remeza on sale. Bb80vomb8ze The compressor is still from delivery original packaging and has never been used. Other technical data: - Type: SB4/F-500.ABE75 - Capacity: 900 liters/minute - Max. Pressure: 10 bar - Year of manufacture: 2021

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

8

Erlangen

8,003 km

3,0 kW piston compressor

RENNER REKO 510-B

€1,390

EXW Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: as good as new (ex-display), Year of construction: 2022, REKO 510-B Auxiliary compressor (reciprocating compressor) incl. operating hours counter incl. 3 litre compressed air tank Hours: 0.75 Bh Year: 2022 Maximum pressure: 10 bar Flow rate: 380 l/min Nominal power: 3.0 kW Ckzqvxed Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 3 liters Dimensions: 735 x 620 x 698 mm Weight: 45 kg We always have a wide range of new and used compressors in stock!

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Ahaus

7,617 km

Compressor

CAIR COMPANY CairMobil 350

Price info Price info Already requested Call

Condition: new, feed pressure 10,0 bar intake capacity 345 L/min Effective free air delivery 228 L/min Receiver capacity 50,0 Ltr. motor 230 V power capacity 2,2 kW weight of the machine ca. 51,0 kg. dimensions of the machine ca. 800 x 390 x 750 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to I2ndcsve0 precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - Solid rubber wheels - a branded pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Atlas Copco piston compressor LE 3 - 10 S bar TM in

Atlas Copco

€2,592

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: as good as new (ex-display), Exhibitor - Atlas Copco piston compressor LE 3 - 10 S bar TM incl. 90 L tank Condition: Very good Usable volume flow measured according to ISO 1217-3, Annex C: at operating overpressure 10.0 bar 3.4 l/s 0.20 m3/min at operating pressure 7.0 bar 4.90 l/s 0.29 m3/min at operating pressure 4.0 bar 8.60 l/s 0.52 m3/min Power requirement at operating pressure 10.0 bar 3.48 kW Power requirement at operating overpressure 7.0 bar 2.91 kW Power requirement at operating overpressure 4.0 bar 2.52 kW Technical data: Bikfisuxwrg Suction pressure 1 bar Suction temperature 20 °C Relative humidity 0 % Oil filling quantity 0.8 l Sound pressure level, measured according to ISO 2151 79 dB(A) Tank volume 90 l Limit values: Operating overpressure 1 to 10 bar Intake temperature 0 to 40 °C Cooling air temperature 0 to 40 °C Electric motor data: Flanged three-phase motor with squirrel-cage rotor, protection class IP 55, insulation class F. Make Leroy Somer LS 100L Rated power / rated speed 2.2 kW / 1500 min-1 Voltage / frequency 400 V / 50 Hz Dimensions, weights and connections: Length/width/height 982 / 504 / 980 mm Net weight 89 kg Compressed air connection G 1/2 The direct coupling of the compressor block to the motor and the use of lightweight materials enable us to achieve excellent cooling properties. The LE/LT series is ideal for confined spaces. It can be used as a stand-alone solution, but can also be easily integrated into OEM / original equipment manufacturer products.

Send inquiry Send inquiry Already requested more

Listing

Request images Request images Already requested

Wiesbaden

7,810 km

Compressor

WÜRTH K 200

Price info Price info Already requested Call

Condition: excellent (used), Suction capacity: 200 l / min effective delivery rate: 115 l / min Maximum pressure: 8 bar Drive motor: AC 230 V, 1.1 kW Jcddufv Container capacity: 9.5 l Space required: 410 x 340 x 630 mm Weight: 21 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

Erlangen

8,003 km

14 bar piston compressor with 150 l tank

Renner REKO H 710/150

€1,790

EXW Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: as good as new (ex-display), Year of construction: 2022, Exhibit: RENNER REKO H 710/150 Piston Compressor Year: 2022 Operating hours: 0.10 h Stationary piston compressor on powder-coated 150 litre compressed air tank. Nominal power: 4.0 kW max. pressure: 14 bar Flow rate: 500 l/min Cylinders/Stages: 2/2 Ciadu9tf Compressed air tank: 150 liters Dimensions L x W x H: 1290 x 450 x 1130 mm Weight: 135 kg We always have a wide range of new and used compressors in stock!

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Ahaus

7,617 km

Compressor

CAIR COMPANY CairMobil 180 Oelfrei

Price info Price info Already requested Call

Condition: new, feed pressure 8,0 bar intake capacity 180 L/min Effective free air delivery 112 L/min Receiver capacity 6,0 Ltr. motor 230 V power capacity 1,1 kW Hjs29ix weight of the machine ca. 14,0 kg. dimensions of the machine ca. 380 x 310 x 490 mm Description : - portable craftsman piston compressor - permissible duty cycle up to 30% - *1-stage, direct-coupled, single-cylinder airend - Compressor mechanics working completely OIL-FREE - Very compact design for easy handling - Finely ribbed cylinder and cylinder head - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - an automatically regulating pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges - Safety valve - pre-assembled connection cable with plug

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Gentilin oil-free compressor Clinic Dry 3/40 HS mi

Gentilin

€2,310

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Gentilin Clinic Dry 3/40 HS: The specialist for the purest air The oil-free Clinic Dry 3/40 HS compressor from Gentilin is part of the Clinic Air Compressor range. These devices are particularly clean and specialize in the delivery of clean and dry compressed air. This makes them ideal for the needs of sensitive work areas, such as those found in scientific institutions and laboratories. The Clean Compressor Clinic Dry 3/40 HS is equipped with a high-performance membrane dryer and a 3 µm coalescence filter as standard. The additional high-performance sterile filter can filter particles such as fine dust, bacteria and spores with a size of up to 0.01 µm and produce virtually sterile compressed air. The Clinic Dry 3/40 HS is not only a specialist for the purest air, but also an extremely quiet compressor! At just 64 dB(A), its noise level is comparable to that of a normal canteen. The advantages of the Clinic Dry 3/40 HS at a glance: * Very quiet compressor with a sound pressure level of only 64 dB(A) Bikflmbyoce * Stationary piston compressor with space-saving design * Can be used anywhere where clean compressed air is required, e.g. in laboratories * designed for continuous operation, maintenance-free for up to 3,000 operating hours * with oil-free 2-cylinder compressor for a long service life * Powerful and low-maintenance thanks to patented AXXER® technology * efficient thanks to direct drive and low starting current * Ideal for use with tools with medium compressed air requirements * 3-year warranty on the power unit with online registration Technical data: Filter: 0.01 µm Intake air (0 bar): 240 l/min Delivery volume (5 bar): 130 l/min Maximum pressure: 10 bar Tank capacity: 40 l Speed: 1,400 min-1 Cylinder: 2 Motor power: 1.8 kW Electrical connection: 230 V ~50 Hz Weight: 49 kg Dimensions: (LxWxH) 660 x 660 x 460 mm Sound pressure level: 64 dB(A)* Compressed air connection: G1/4" internal The standard equipment of the Gentilin Clinic Dry 3/40: * Coalescence filter 3 µm, membrane dryer, dew point 20°C below room temperature * Sterile filter for particle size of 0.01 µm * 40-liter stainless steel container, rustproof and hygienic * Innovative technology for noise suppression * Quality electric motor with motor protection switch * Fully automatic switch-on and switch-off operation * High-quality CONDOR pressure switch * Including operating hours counter Clean through and through: The oil-free Clean compressor with AXXER® technology! With its space-saving design, the Clinic Dry 3/40 HS is specially designed for stationary use - just right for sensitive work that has to take place right next to the appliance. The high-quality stainless steel container underlines the high standards of cleanliness that Gentilin pursues with the Clinic Air series. And rightly so: in addition to the membrane dryer and sterile filter, the container is made of stainless Inox steel, which offers protection against oxidation and deposits. With the integrated AXXER® technology, the cleaner is even designed for continuous operation. The innovative counter-piston system ensures oil-free, efficient and extremely low-maintenance operation, which only requires maintenance after around 3,000 operating hours*.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Erlangen

8,003 km

3 kW piston compressor with tank

KAESER EPC630-250St

€2,890

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Year of construction: 2023, machine/vehicle number: MA0172, new KAESER EPC 630-250 St piston compressor - 10 bar with horizontal lacquered 250 litre container Ra0ln 2 cylinders max pressure: 10 bar Rated power: 3.0 kW Volume flow at 6 bar : 410 l/min Volume flow at 8 bar : 375 l/min Sound level: 75 dB(A) Compressed air output: 1/2" Dimensions length x width x height: 650 x 700 x 1810 mm Weight: 150 kg Visit our shop. We always have a wide range of new and used compressors on hand!

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Ahaus

7,617 km

Compressor

CAIR COMPANY CairMobil 730 Plus

Price info Price info Already requested Call

Condition: new, feed pressure 10,0 bar intake capacity 727 L/min Effective free air delivery 582 L/min Receiver capacity 90,0 Ltr. motor 400 V power capacity 4,0 kW weight of the machine ca. 91,0 kg. dimensions of the machine ca. 1040 x 450 x 850 mm Ciqvwrk8a7 Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary The standard scope of delivery includes: - Condor pressure switch MDR 3 - a high quality filter pressure reducer - two pressure gauges - a condensate drain tap - a pre-assembled connection cable with 5-pin. connector and phase reversal

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Schneider compressor UNM STS 660-10-270 1121570213

Schneider Airsystems

€1,883

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, The space-saving all-rounder: The Schneider UNM STS 660 with upright body The Schneider UNM STS 660-10-270 compressor is the ideal solution for anyone looking for a powerful yet space-saving 400 volt compressor. The two-stage piston compressor with its upright design is the perfect all-rounder, especially for small and medium-sized businesses: thanks to the clever modular system of the Schneider UniMaster series, the stationary compressor can be extended at any time with a sound-insulating hood or a refrigeration dryer. There is a big plus point for the complete equipment: The Schneider UNM STS 660 includes all the necessary (safety) fittings. The advantages of the UNM STS 660-10-270 at a glance: * Powerful performance: up to 520 l/min effective delivery rate thanks to 2-cylinder unit * Upright design: space-saving due to small footprint and optimal arrangement * Low noise level: only 78 dB(A) thanks to low speed and low vibrations * Convenient maintenance: easy inspection thanks to practical hand hole opening * No rusting through: container with internal coating and 15-year guarantee * Universal use: for many applications (without permanent compressed air requirement) Technical data Schneider UniMaster STS-660-10-270: Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Tank volume 270 l Weight 170 kg Noise 78 dB(A) Dimensions (WxDxH) 750x705x1800 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4 kW Important: For compressors with a 4 kW motor, the regulations of the local electricity company must be observed. Bikfmg3cikn The standard equipment of the Schneider piston compressor UNM STS 660-10-270 * V-belt driven compressor: two-stage compression * Rubber oscillating elements on the feet: steady standing * Intercooler and aftercooler: rapid cooling * Condor pressure switch: high quality * Container pressure gauge: also included * Additional sleeves: Tank can be easily extended * Motor protection and safety valve: complete protection * Condensate drain cock and 3/4 inch stopcock: reliable sealing The Schneider Unimaster STS 660: Smooth running and top performance! This all-rounder not only impresses with its space-saving exterior thanks to its vertical design - its powerful interior also leaves nothing to be desired! The V-belt-driven 2-cylinder unit with its two-stage compression ensures a high level of efficiency - while running quietly at the same time. The intermediate and aftercooler as well as the large fan flywheel cool the compressed air produced. The result is impressive: An effective delivery rate of 520 l/min with a container volume of 270 liters. The STS-660-10-270 is impressive: Moderate noise level thanks to low speed The Schneider UniMaster STS-660-10-270 not only scores points in terms of design and performance - the low noise level of the UniMaster is also a clear advantage: the low speed of just 1025 rpm reduces vibrations and ensures that important components are subjected to less stress. A pleasant side effect is that the unit's noise level is significantly reduced at low speed, resulting in a sound pressure level of just 78 dB(A) for the UNM STS 660-10-270. With this value, the stationary

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Ahaus

7,617 km

Compressor

CAIR COMPANY CairMobil 540

Price info Price info Already requested Call

Condition: new, feed pressure 10,0 bar intake capacity 539 L/min Effective free air delivery 377 L/min Receiver capacity 90,0 Ltr. motor 400 V power capacity 3,0 kW weight of the machine ca. 80,0 kg. dimensions of the machine ca. 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2x cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head - for optimum temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - Powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary The standard scope of delivery includes: - Condor pressure switch MDR 3 2u9qna - a high quality filter pressure reducer - two pressure gauges - a condensate drain tap - pre-assembled connection cable with 5-pin. plug and phase changer

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Atlas Copco piston compressor LE 2 - 10 bar TM incl

Atlas Copco

€2,070

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Technical data: Suction pressure 1 bar Suction temperature 20 °C Relative humidity 0 % Oil filling quantity 0.8 l Sound pressure level, measured according to ISO 2151 78 dB(A) Q2x8l7y9q Tank volume 90 l Limit values: Operating overpressure 1 to 10 bar Intake temperature 0 to 40 °C Cooling air temperature 0 to 40 °C Usable volume flow measured according to ISO 1217-3, Appendix C: at operating overpressure 10.0 bar 2.3 l/s 0.14 m3/min at operating pressure 7.0 bar 3.29 l/s 0.20 m3/min at operating pressure 4.0 bar 5.76 l/s 0.35 m3/min Power requirement at operating pressure 10.0 bar 2.42 kW Power requirement at operating pressure 7.0 bar 2.05 kW Power requirement at operating overpressure 4.0 bar 1.91 kW Electric motor data: Flanged three-phase AC motor with squirrel-cage rotor, protection class IP 55, insulation class F. Make Leroy Somer LS 100 L1 PC-4p Rated power / rated speed 1.5 kW /1500 min-1 Voltage / frequency 400 V / 50 Hz Dimensions, weights and connections: Length/width/height 982 / 504 / 980 mm Net weight 85 kg Compressed air connection G 1/2 By coupling the compressor block directly to the motor and using lightweight materials, we achieve excellent cooling properties. The LE/LT series is ideal for confined spaces. It can be used as a stand-alone solution, but can also be easily integrated into OEM / original equipment manufacturer products.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Schneider compressor UNM STL 1000-10-500 C 1121580

Schneider Airsystems

€3,946

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Properties: * Stationary piston compressor with star-delta switch for high operational safety thanks to integrated motor protection and undervoltage release * Compressor for work up to 10 bar * Smooth-running V-belt driven 2-cylinder unit with two-stage compression * Suitable for many jobs in the professional sector E2mukcq * Applications: Expansion of compressed air systems, increasing reliability * Highest quality of installed components Advantages: * Smooth running and perfect cooling thanks to new, wedge-driven compressor unit with optimum cooling air flow and improved delivery performance * Lower volume - less noise pollution thanks to new unit * Compressor with low speed - reduced vibrations and therefore less stress on components * Long service life ensured by 15-year guarantee against rusting through of the container * Space-saving design - small footprint thanks to optimum arrangement of components * Smooth standing thanks to rubber suspension elements supplied as standard Technical data Motor power 5.5 kW Suction capacity 1000 l/min Filling capacity 790 l/min On/off pressure 8/10 bar Cylinder/stages 2/2 Tank volume 500 l Voltage 400 V/ 50 Hz Speed 995 min-1 Sound power level 82 dB(A) Dimensions 1950 x 625 x 1380 mm Connection 3/4" Weight 292 kg Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Schneider UNM STS 660-10-270 XDK - 520 l/min - 10

Schneider Airsystems

€3,230

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: as good as new (ex-display), Exhibitor compressor Advantages: * HANDIER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency * Tank with baked-on inner coating * Comes with all fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain valve and stopcock * Equipped with rubber oscillating elements as standard * With refrigerant dryer and bypass line * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for simple connection of an Ecomat condensate drain * High-performance refrigeration dryer with Super-Dry Technology and ECO switch-off * Start-up via an automatic star-delta switch is mandatory for all compressors and units from 5.5 kW. This is not included in the scope of delivery, but the start-up relief is: * 15-year guarantee on containers against rusting through * The low speed reduces vibrations, protects the compressor components and reduces noise * Better compressed air quality and work results * Intercooler and aftercooler ensure rapid cooling of the compressed air produced * The refrigeration dryer removes the condensate from the compressed air * Equipped with a bypass line as standard * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Tank volume 270 l Weight 206 kg Noise 78 dB(A) Dimensions (WxDxH) 945x705x1800 mm Voltage 400 Volt/50 Hz (three-phase current) Eff. flow rate 520 l/min Air outlet 3/4 "i Drive power 4.0 kW Q20xy8qqo Please note that this item will be delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Atlas Copco piston compressor LE 2 - 10 bar TM incl

Atlas Copco

€2,412

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: as good as new (ex-display), Exhibitor - Atlas Copco piston compressor LE 2 - 10 bar TM incl. 90 L tank Condition: Very good Usable volume flow measured according to ISO 1217-3, Annex C: at operating overpressure 10.0 bar 2.3 l/s 0.14 m3/min at operating pressure 7.0 bar 3.29 l/s 0.20 m3/min at operating pressure 4.0 bar 5.76 l/s 0.35 m3/min Power requirement at operating pressure 10.0 bar 2.42 kW Power requirement at operating pressure 7.0 bar 2.05 kW Power requirement at operating overpressure 4.0 bar 1.91 kW Technical data: Suction pressure 1 bar Suction temperature 20 °C Relative humidity 0 % Oil filling quantity 0.8 l Sound pressure level, measured according to ISO 2151 78 dB(A) Tank volume 90 l Limit values: Operating overpressure 1 to 10 bar Intake temperature 0 to 40 °C Cooling air temperature 0 to 40 °C Electric motor data: Flanged three-phase AC motor with squirrel-cage rotor, protection class IP 55, insulation class F. Make Leroy Somer LS 100 L1 PC-4p Qatt27ba Rated power / rated speed 1.5 kW /1500 min-1 Voltage / frequency 400 V / 50 Hz Dimensions, weights and connections: Length/width/height 982 / 504 / 980 mm Net weight 85 kg Compressed air connection G 1/2 By coupling the compressor block directly to the motor and using lightweight materials, we achieve excellent cooling properties. The LE/LT series is ideal for confined spaces. It can be used as a stand-alone solution, but can also be easily integrated into OEM/ original equipment manufacturer products.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Atlas Copco piston compressor LE 3 - 10 S bar TM in

Atlas Copco

€2,225

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Usable volume flow measured according to ISO 1217-3, Annex C: at operating overpressure 10.0 bar 3.4 l/s 0.20 m3/min at operating pressure 7.0 bar 4.90 l/s 0.29 m3/min Bikfd0vabxt at operating pressure 4.0 bar 8.60 l/s 0.52 m3/min Power requirement at operating pressure 10.0 bar 3.48 kW Power requirement at operating overpressure 7.0 bar 2.91 kW Power requirement at operating overpressure 4.0 bar 2.52 kW Technical data: Suction pressure 1 bar Suction temperature 20 °C Relative humidity 0 % Oil filling quantity 0.8 l Sound pressure level, measured according to ISO 2151 79 dB(A) Tank volume 90 l Limit values: Operating overpressure 1 to 10 bar Intake temperature 0 to 40 °C Cooling air temperature 0 to 40 °C Electric motor data: Flanged three-phase motor with squirrel-cage rotor, protection class IP 55, insulation class F. Make Leroy Somer LS 100L Rated power / rated speed 2.2 kW / 1500 min-1 Voltage / frequency 400 V / 50 Hz Dimensions, weights and connections: Length/width/height 982 / 504 / 980 mm Net weight 89 kg Compressed air connection G 1/2 The direct coupling of the compressor block to the motor and the use of lightweight materials enable us to achieve outstanding cooling properties. The LE/LT series is ideal for confined spaces. It can be used as a stand-alone solution, but can also be easily integrated into OEM / original equipment manufacturer products.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Atlas Copco piston compressor Automan AC30-11 G BM

Atlas Copco

€1,524

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Atlas Copco Automan piston compressor AC 30-11 G BM T S Fully automatic, internally completely piped and wired compact unit, two-cylinder, two-stage compression, air-cooled, acoustic hood Reference conditions Suction pressure abs. 1 bar Suction temperature 20 °C relative humidity 0 % Limit values and tolerances Operating overpressure 1 to 11 bar Suction temperature 5 to 40 °C Cooling air temperature 0 to 40 °C Technical data Max. operating pressure 10 bar (e) Suction capacity 360 l/min Volume flow* 276 l/min Sound pressure level 65 dB(A) Electrical data Motor make NS19S Rated power 2.2 kW Nominal speed 1050 min-1 Voltage 400 V Frequency 50 Hz Dimensions, weights and connections Dimensions length/width/height 750 / 580 / 710 mm Net weight 170 kg Compressed air connection G 1/2 Scope of delivery * Compressor unit for installation without foundation (compressor element incl. electric motor). * Compressor and electric motor are V-belt driven. * Suction filter, relief and safety valve, pressure gauge and pressure switch are integrated. Bkgo9ghn * Quick coupling * Electrical connection cable * acoustic hood The compressor is only designed for intermittent operation. The compressor unit described complies with the CE standard. *Reference conditions according to ISO 1217, Annex C, measured according to ISO 5167-2 Sound pressure level measured according to ISO 2151 with tolerance +3 db(A): 2004 using ISO 9614/2

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Herrenberg

(dealership location)

7,947 km

Schneider compressor UNM 360-8-40 WXM Clean - Oil-free

Schneider Airsystems

€2,865

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Schneider compressor UniMaster CLEAN - UNM 360-8-40 WXM Clean * Direct flanged 3-cylinder piston compressor * 15-year warranty on tank against rusting through Bsswbm0h * Operating hours counter for checking the actual running time * Membrane dryer for completely dried and cleaned compressed air * Oil-free, low-maintenance unit for compressed air in its purest form * Low temperature and optimum cooling for guaranteed 80 % duty cycle Technical data Pressure 8 bar Suction capacity 360 l/min Filling capacity 225 l/min Drive power 2.2 kW Voltage 230 V Speed 1450 1/min Tank volume 40 l Weight 58 kg Noise 66 dB(A) Dimensions WxDxH 710x410x810 Please note that this item will be delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Send inquiry Send inquiry Already requested more

Save search query