CNC Lathe - Inclined Bed Type

NILES-SIMMONS N20-2 MC

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm Bsdpfovu E R Sjx Adqjdf diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Bedpfx Ajyxn H Nsdqsdf

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% ED KW28 Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) Bdedpfx Adjy Tkgbsqsf RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW Bdjdpfx Adeyn Em Roqsf ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Bdsdpoyviigefx Adqsf Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Generator - 2 machines Max gear diameter: 800 mm Bedpfxjum Ez Re Adqsdf Max module: 16 Max gear ring width: 125 mm Number of teeth: 5-150 Spindle speed range: 20-125 rpm Main motor power: 7.5 kW Overall dimensions (LxWxH): 3170x2180x2200 mm Weight: 15 t SARATOV 5C276 Straight Bevel Gear Generators Module (mm): 10 Max. gear wheel diameter: 500 mm Max. bevel gear cone distance: 250 mm Max. gear ring width: 80 mm Min. angle of dividing cone (pitch): 5 degrees Number of gear teeth: 10 – 150 Distance between spindle and machine center: max. (stock angle 5°): 375 mm; min. (stock angle 90°): 75 mm Stroke: 100 mm Slider double stroke: 48 – 400 spm Motor capacity: 4.0 kW Machine weight: 8750 kg

Condition: good (used), Coordinate grinding machine Jig grinding machine Brand: Henri Hauser SA. Model: 3.S.M.O. Serial No.: 76 No.: 218···600 FAGOR 2-axis height display. Bdjdpfxektkmve Adqsf Machine Type: Jig Grinding Machine Control Type: Conventional X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding diameter: 220 mm Table top: 600 x 320mm Neckline: 310mm Angle Range: 12° Grinding carriage adjustment - vertical: 110 mm Lifting speeds: 0 - 6 m/min. Grinding spindle speed: max. 50,000rpm Peripheral speed: max. 35m/sec Maximum weight of the piece on the table: 80 kg.

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 1,350 mm, total height: 2,315 mm, total width: 2,067 mm, overall weight: 8,000 kg, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 4,530 mm, number of axes: 4, This 4-axis DN SOLUTIONS 3100 LY turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 420 mm and a turning length of 1285 mm. The machine is equipped with a 12-inch main spindle chuck and a rapid traverse speed of 30 m/min in both X and Y axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS 3100 LY machine we have for sale. Contact us for further details. • Main spindle chuck size: 12 in (306 mm) • Bar capacity: 102 mm • Rapid traverse: X 30 m/min; Y 30 m/min; Z 10 m/min • Max turning diameter: 420 mm • Max turning length: 1285 mm • Driven tool speed: 5000 rpm • Tooling: 12 stations, BMT65 • Guideway type: Box guideways • Axes/features: C-axis, Y-axis • Electrical: 380 V, 3-phase, 50/60 Hz • Electrical ratings: 55.02 kVA; Full load current 83.60 A; Short circuit capacity 10 kA; Interrupting capacity 5 kA Additional equipment • Optional: • 1 pc. External turning tool post BMT65 25x25 single left, right (500-0679) • 3 pcs. External turning tool post R/L high (500-6960) • 1 pc. Facing tool post BMT65P/SQ 25 mm (500-0834) Bdsdpfjyu Rn Tox Adqjf • 3 pcs. Boring bar holders (ID: 50 mm) BMT65P (500-5555) • 1 pc. IK cover (500-0837) • 1 pc. Reducing sleeve set • 1 pc. Reducing sleeve set (500-0808) • 1 pc. Adapter set PRECI-FLEX Er32 (BMT 65P) (500-0500) • 12 pcs. Covers BMT 65 (500-1931) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs • Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder includedMachine is a Showroom machine that never has been in production. Like new Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,515 h, load capacity: 18,000 kg, lifting height: 4,500 mm, load center: 1,200 mm, fuel type: diesel, mast type: triplex, power: 168 kW (228.42 HP), motor manufacturer: Cummins QSB6.7, fork carriage width: 2,600 mm, fork length: 2,400 mm, fork width: 260 mm, fork thickness: 110 mm, tire condition: 70 %, front tire size: 14.00-24, rear tire size: 14.00-24, overall weight: 33,540 kg, color: blue, Equipment: CE marking, air conditioning, cabin, centralized greasing system, pallet forks, sideshift, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Max. lifting height: 4.5 m Mast type: Triplex Fork length: approx. 2,400 mm Sideshift fork carriage: Yes Drive: Diesel Transmission: Automatic (powershift) Cabin: Enclosed Heated cabin: Yes Tyres: Pneumatic Stabilisers: No Engine manufacturer: Cummins QSB6.7 Emission class: Stage IV / V Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Heavy-duty 18-ton diesel forklift Triplex mast with free lift Sideshift fork carriage Comfort operator cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic servo steering Continental pneumatic tyres Rear view camera system Ideal for heavy industrial handling, steel, concrete and port logistics. === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. Tyres in good condition (approx. 70%). Machine ready for immediate work. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Bdodpjyid Iyofx Adqof Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.

Condition: used, functionality: fully functional, table diameter: 430 mm, The price is for both machines – only sold as a set. Bdsdpfoxfub Dox Adqsf Make: STAEHELY SH 500 Accessories: change gears, arbors, and one machine with tangential milling head (see photos)!!!!! Table diameter = 430 mm Max. gear diameter = 500 mm Gear width = 240 mm Module = 6