Center lathe

Nardini ND 220

Condition: excellent (used), functionality: fully functional, Distance between centers: 1500 mm Center height: 220 mm Spindle bore: 52 mm Tailstock quill: MK 4 18 speeds: 25 - 2000 rpm Pole-change motor: 2.9 / 5.9 kW with gap bed bridge Isdpfx Aey St Ixechsti

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Itjdpfewpud Aex Achji Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: excellent (used), Conventional lead and feed screw lathe from manufacturer Nardini S.A. Máquinas e Ferramentas, model ND 220 SE. Well-maintained machine in technically flawless condition. Technical Data: Machine type: Lead and feed screw lathe Itsdpfxoypcpxo Achoi Manufacturer: Nardini Model: ND 220 SE Control: Conventional Center height: 220 mm Distance between centers: 1,000 / 1,500 mm Swing over bed: 440 mm Swing over cross slide: 270 mm Swing in gap: 630 mm Gap length in front of faceplate: 200 mm Spindle Spindle nose with short taper size 6, DIN 55027 Spindle bore: 52 mm Internal taper: 1:20 Reducer bush: MT 4 18 spindle speeds: 25 – 2,000 rpm Feed and thread range 132 longitudinal feeds: 0.057 – 2.645 mm/rev 132 cross feeds: 0.028 – 1.322 mm/rev 54 metric threads 54 Whitworth threads 54 module threads 54 diametral pitch threads Leadscrew pitch: 6 mm Carriage & Compound Cross slide travel: 250 mm Top slide travel: 125 mm Max turning tool section: 20 × 20 mm Top slide swivel range: ± 45° Tailstock Quill diameter: 60 mm Internal taper: MT 4 Quill stroke: 200 mm Lateral offset: 15 mm Drive Main motor: 3-phase 380 V / 50 Hz, pole-reversible, 3 / 6 kW Coolant pump: 0.09 kW Operational Advantages - Robust machine bed - Very large feed and thread range - Suitable for both single-part and series production - Easy operation - Durable industrial quality Used machine Technically tested Fully functional Ready for immediate use Delivery time: Immediate Ex-works, loaded free of charge Loading: Forklift available Transport / shipping: can be arranged

Year of construction: 1987, condition: ready for operation (used), Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible. Iedpfx Aju Nllvochoti

Condition: new, Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 330 V economyline Condition: New machine with stepless speed control according to the highest safety standards Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard equipment includes: - 3-axis digital readout, 6" colour display - LED machine light, integrated into machine enclosure - Electromechanical limit switch device for threading and feed operation - Quick-change toolpost, size A, with turning toolholder - Main drive brake system (spindle brake) - Sliding chuck guard with limit switch monitoring - Removable rear chip guard - Sliding splash guard - Pull-out chip tray Itsdpfx Aew S E Ddjchji - Simple bed stop (longitudinal fixed stop) - Central lubrication - Set of change gears (tooth counts: 21-27-28-33-42-120) - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle nose DIN 55027-5 - Additional service socket - 2 fixed centre points DIN 806-MK 3 - Set of operating tools, keys, and oil gun - Replacement shear pins - Operating manual with spare parts list and electrical documentation

Condition: used, total height: 2,000 mm, total length: 1,900 mm, total width: 1,700 mm, Empty weight: 1.500 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 12389 - Drive system: Conventional - X-axis travel [mm]: 670 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 400 - Table width [mm]: 800 - Table depth [mm]: 200 - Magnet width [mm]: 630 - Magnet depth [mm]: 200 - Max. grinding wheel diameter [mm]: 240 - Transport dimensions: 1900mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information Itjdpfxowh Npks Achoi VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Itjdpowxfaasfx Achei