CNC lathe

Muratec mt12

Condition: good (used), functionality: fully functional, 1 x CNC lathe with twin spindles Muratec MT 12 Year of manufacture: 1997 Control: Fanuc Series 16 T with loading magazine Fedek DH 65 L Year of manufacture: 2007 + chip conveyor Technical data: Gsdpfx Ao Aipiqjglskd Maximum turning diameter: 210 mm Maximum turning length: 300 mm Spindle bore: 65 mm 2 x 15-position turret C-axis powered tools Further data and photos will follow. The machine can still be inspected in operation for approximately 3 weeks while powered on. A second machine with a bar feeder is located in the same facility.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Gjdpsyx U Itefx Aglskd Max. turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Forklift available for loading the machine! Machine price: €29,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €36,500 excluding VAT This machine is available for inspection in Genk and can be powered on for demonstration!

Condition: good (used), functionality: fully functional, 1 x CNC lathe with twin spindles Muratec MT 12 Year of manufacture: 1999 Control system: Fanuc Series 16 T with gantry loader + chip conveyor Technical data: Maximum turning diameter: 210 mm Maximum turning length: 300 mm Spindle bore: 65 mm 2 x 15-position turret C-axis driven tools further data + photos will follow. The machine can still be inspected in operation for approximately 3 weeks while it is powered on. Gkedpfx Agj Aipcgoljd A second machine with bar loader is available at the same facility.

Condition: used, Year of construction: 2000, 3 Muratec machines 1 MURATEC MT12 CNC lathe Dual spindle, dual turret Year: 1999 + 1 STAUBLI RX90 robot with control center 1 Muratec MT12 CNC lathe with dual spindle and dual turret 4 axes Year: 2000 1 BOSS 542/32 CNC loading system Godpfx Agj Aggc Sslokd 1 Muratec MT12 CNC lathe with dual spindle and dual turret Fanuc CNC Year: 1999 Supplied with all tooling and tool holders.

Condition: new, Year of construction: 2026, functionality: fully functional, turning length: 480 mm, turning diameter over cross slide: 300 mm, turning diameter: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 7,000 rpm, spindle bore: 45 mm, travel distance X-axis: 160 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 510 mm, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (max.): 6,000 rpm, feed rate Y-axis: 15 m/min, total height: 1,985 mm, total length: 2,680 mm, total width: 1,950 mm, bar diameter (max.): 45 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, FANUC 31iT Plus CNC control iManual Guide 15" TFT Touch Screen 2 SAUTER turrets with 12 positions for radial VDI 25 driven tools Y-axis travel: +40/-30 mm Main and counter-spindle power: 15 Kw Main and counter-spindle nose: ASA 5" Bar capacity: 45 mm CE marking MACHINE COMPLETE WITH: - Chip conveyor - 2 high-pressure coolant pumps (14 bar) - Installation materials - Part washing gun - 3D machine model in .stp format - INDUSTRY 4.0 READY package - Part catcher for bar machining - Bar feeder interface - Machine status lamp - Tool load monitoring - MARPOSS tool pre-setter - 2 foot pedals for opening/closing the main and counter-spindle Gjdpezcfb Dofx Agljkd - 2 pumps for high-pressure coolant (24 bar) - Electrical cabinet air conditioner

Condition: good (used), Year of construction: 1999, 1 Muratec MT12 CNC lathe with dual spindle and dual turret Gedoy Ta Stepfx Agljkd Fanuc CNC control Year: 1999 Supplied with all tooling and tool holders.

Condition: good (used), Year of construction: 1999, 1 MURATEC MT12 CNC lathe Double-spindle, double-turret Year 1999 1 STAUBLI RX90 robot with control center Gkodpfjy Ta Sgex Aglod All tooling and tool holders included.

Condition: used, Year of construction: 2000, DAEWOO PUMA 300 LM Lathe CNC lathe with C axis Live tools: 4 units – 2 radial + 2 axial CNC FANUC 18-T CAPACITY Swing diameter over bed: 590 mm Swing diameter over cross-slide: 450 mm Max turning diameter: 355 mm Max turning length: 1233 mm Bar passage: 76 mm Max drilling diameter with driven tools: 20 mm Max tapping diameter with driven tools: M16 TRAVELS X axis: 250 mm Z axis: 1330 mm SPINDLE Speed: 35 - 3500 rpm Spindle nose: ASA A2-8 Motor: 18.5/22 kW Gksdpfx Agoyx A Rvjlsd POWERED TURRET 12 stations for live tooling Live tool rotation speed: 40-4000 rpm AUTOMATIC TAILSTOCK Quill diameter: 100 mm Tailstock: MT5 Quill travel: 100 mm Total power: 50 kW Machine dimensions: 3990x1660x H 1820 mm Weight: 6700 kg INCLUDES Chip conveyor

Condition: used, Year of construction: 2001, Technical details: turning diameter: 120 mm turning length: 100 mm control: Fanuc Spindle 1 power: 7,5 kW Spindle 1 RPM: 4500 1/min Spindle 2 power: 7,5 kW Spindle 2 RPM: 4500 1/min Distance between spindle noses: 600 mm Turret No.1 stations / rotary tools: 15/15 Power rotary tools turret 1: 2,7 kW RPM of rotary tools turret 1: 4000 1/min Turret No.2 stations / rotary tools: 15/15 Power rotary tools turret 2: 2,7 kW RPM of rotary tools turret 2: 4000 1/min Travel x/z turret 1: 250 / 300 mm Travel x/z turret 2: 250 / 920 mm Bar capacity spindle 1: 51 mm Bar capacity spindle 2: 51 mm power chuck: 165 mm Spindle bore sp. 1: 62 mm Spindle bore sp. 2: 62 mm dimensions of the machine ca.: 3700 x 2300 x 3000 mm weight of the machine ca.: 5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 120 x 100 mm Doublegripper capacity 2 x 3 kg Gkodpfoy D Nxdjx Agled *

Condition: excellent (used), Year of construction: 2006, For Sale: A reliable Yamazaki Mazak Nexus VCN-510C vertical CNC machining center—a high-end production machine from the renowned Japanese manufacturer MAZAK, valued for its precision, durability, and stable operation in industrial manufacturing. The VCN-510C is ideal for machining steel, aluminum, and workpieces that require high accuracy and repeatability. Thanks to the MAZATROL 640M control system, the machine offers intuitive operation and quick production setup. Technical Specifications: Year of manufacture: 2006 Control system: MAZATROL 640M X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm T-slot table Automatic tool changer (ATC) Central lubrication Control cabinet Godpfx Aoyha Ivegljkd Weight: 7,100 kg Very low operating hours!!!!!