Bed type milling machine

MTE BT3200

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Dsdpfx Aajy Tkgbonokr Pull stud: DIN 69872 Form A Main drive: Drive power: 100% ED KW28 Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Djdpfx Aaoyxn H Nenjkr

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing Dkodpfx Ajzlcyusanjr accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Dkedpfxsyn Em Ro Aanjr Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details Djdpfx Asyviigeanokr ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,515 h, load capacity: 18,000 kg, lifting height: 4,500 mm, load center: 1,200 mm, fuel type: diesel, mast type: triplex, power: 168 kW (228.42 HP), motor manufacturer: Cummins QSB6.7, fork carriage width: 2,600 mm, fork length: 2,400 mm, fork width: 260 mm, fork thickness: 110 mm, tire condition: 70 %, front tire size: 14.00-24, rear tire size: 14.00-24, overall weight: 33,540 kg, color: blue, Equipment: CE marking, air conditioning, cabin, centralized greasing system, pallet forks, sideshift, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Max. lifting height: 4.5 m Mast type: Triplex Fork length: approx. 2,400 mm Sideshift fork carriage: Yes Drive: Diesel Transmission: Automatic (powershift) Cabin: Enclosed Heated cabin: Yes Tyres: Pneumatic Stabilisers: No Engine manufacturer: Cummins QSB6.7 Emission class: Stage IV / V Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Dedpfeyid Iyox Aanjkr Heavy-duty 18-ton diesel forklift Triplex mast with free lift Sideshift fork carriage Comfort operator cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic servo steering Continental pneumatic tyres Rear view camera system Ideal for heavy industrial handling, steel, concrete and port logistics. === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. Tyres in good condition (approx. 70%). Machine ready for immediate work. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2052582, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: Haas, table width: 914 mm, table length: 1,626 mm, table load: 4,536 kg, rotary table diameter: 760 mm, rotational speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Condition: very good (used) 4-axis horizontal machining center Brand: Haas Dodpfxow Uz Ane Aanjkr Equipment: Tool holder SK50 Tool positions: 30+1 Year of manufacture: 03/2008 Weight: 13,600 kg Additional information: Machine has been newly painted Price on request

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, total height: 3,280 mm, overall weight: 24,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 25,000 g, number of axes: 4, This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. • Spindle center to table surface: 50 to 950 mm • Spindle nose to pallet center: 70 to 1,070 mm • Table / Pallet • Max rotation dimensions: 1,000 × 1,000 mm • Continuous table positions: 360,000 • Pallet change time: 7 sec • Pallet type: MAS perforated • Cooling through spindle: 20 bar • Compressed air pressure: 46 bar • Feed • Cutting feedrate: 60,000 mm/min Djdpex D Hzyofx Aanekr • Positioning accuracy X-Y-Z: 0.004 mm • Repeatability X-Y-Z: mm • Tooling / Magazine • Tool change time (tool/tool): 1.9 sec • Tool change time (chip/chip): 4.4 sec • Tool selection: random • Max tool diameter (non-adjacent): 240 mm • Floor space: 3.38 × 6.11 m • Installed power: 50 kVA • Machine features • Work area shower wash system: Yes • Presetting at table edge: Yes • Provision for probe / zero offset: Yes Additional equipment • Chip conveyor: Mayfran Dimensions Machine Depth 3380 mm

Condition: ready for operation (used), Year of construction: 2020, operating hours: 19,990 h, functionality: fully functional, turning length: 2,100 mm, turning diameter: 560 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 117 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 2,200 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, overall weight: 11,000 kg, Hyundai WIA L400LMC – Heavy-Duty Long-Bed Turning Center The Hyundai WIA L400LMC is a robust and powerful turning center designed for machining large and heavy workpieces with high stability and precision. With its high torque spindle, large machining capacity, and integrated automation-ready features, this machine is ideal for demanding industrial applications. With box guide design – the most rigid solution used in turning centers. Key technical specifications: • Main spindle power: 37 kW • Maximum torque: 3,073 Nm • Maximum spindle speed: 2,000 rpm • Maximum turning length: 2,100 mm • Chuck size: 15” • Maximum bar capacity through spindle: Ø117 mm Machine configuration: • 12-position turret with BMT75 interface • C-axis for advanced machining operations • High-pressure through-tool coolant system – 15 bar • Bar feeder interface • Automatic Q-SETTER tool measuring system • FANUC control system • Hydraulic steady rest, programmable via M-code • Large programmable tailstock, controlled via M-code • Coolant spray gun • Wide machine door opening (>2000 mm) for easy loading of large parts • Oil mist / emulsion extraction system Additional equipment included: • 4 driven tools included • SMW-Autoblok SLUB-5-ZS-050310 self-centering steady rest o Monitoring of open/closed position o Clamping range: 50–310 mm The machine was commissioned in 2020 and has been in regular industrial use. The equipment remains in good working condition and offers a powerful solution for heavy-duty turning applications requiring high torque and long part capacity. Dodpjy T Ixbofx Aanekr

Condition: used, functionality: fully functional, machine/vehicle number: E1X359200040, Year of construction: 2009, operating hours: 8,800 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,160 mm, power: 142 kW (193.07 HP), fork carriage width: 2,540 mm, fork length: 2,700 mm, empty load weight: 25,920 kg, drive type: Diesel, Heavy-duty forklift – diesel Chassis number: E1X359200040 Load centre: 1200 Fork width: 280 mm Fork thickness: 90 mm Mast type: Duplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres size: 12.00-24 Front tyres condition: 40 – 60% Rear tyres type: Superelastic Rear tyres size: 12.00-24 Rear tyres condition: 20 – 40% Description: Camera, central lubrication Sideshift, fork positioner, Dodoxybdujpfx Aanjkr 4th valve, full cabin,