width of the strips 100 mm
band length 2000 mm
band speed 15/30 m/sec
tube diameter 20 - 76 mm
angle adjustable from - to 30 - 90 Grad
Dust suction hood 2 x 75 mm
motor speeds: 1420 / 2660 Upm.
face grinding attachment 400 x 100 mm
total power requirement 2,5 / 3,3 kW
weight of the machine ca. 148 kg.
range L-W-H 750 x 1400 x 1200 mm
Furnishing :
- Constant belt tension through spring-loaded tensioning device
- Standard with cylindrical grinding device
- for grinding diameters of diam. 20-76 ...
tube diameter 16 - 76 mm
grinding band dimension 100 x 2000 mm
Band Speed 30 m/min.
voltage 400 V
Ebfqpf
angle adjustable from - to 30 - 90 Grad
power capacity - grinding motor 2,2 kW
range L-W-H 1250 x 700 x 12500 mm
weight 170 kg
Standard Accessories
For tubes and profiles made of metal
Simplified opera on by twistable grinding fixture
Adequate for tube diameter from 1/ 2 to 2 1/ 2
Quick adjustment for grinding angle 30° 90°
Powerful motor 2,2 kW / 380 V
Abrasive roll easy and fa...
neu
ca. 2 Wochen ab Auftragse
P2022
Niederlande
3330
100 x 2.000 mm
20 - 76,1 mm
1
3 kW
190 kg
The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of...
width of the strips 100 mm
band length 2000 mm
Bkqt89h893
band speed 15/30 m/sec
tube diameter 20 - 76 mm
angle adjustable from - to 30 - 90 Grad
total power requirement 3,3 / 400 kW / V
weight of the machine ca. 0,2 t
dimensions of the machine ca. 1,45 x 1,15 x 0,7 m
Grinding diameters: Ø20 - Ø76,1 mm
Grinding angle: 30º – 90º
Belt speed: 30 m/s, 2800 rpm.
Tire size: 100 × 2000 mm
Operation: Leveroperation
Including roll: Ø48,3 mm
Motor: 3 kW
Country of origin: The Netherlands
Qjwcb
Machine weight: 210 kg
This machine is unused!
Tubegrinder model PN 76
- tubes from 20 to 76 mm
- grinding angle adjustable
Javuxrau
- rapid changing system
-grinding belt 2000 x100 mm
- with grinding rolls like at photo
- with holder fro grinding rolls
- weight 200 kg
- motor 3 kw, 380 V 50 Hz 3 ph.
neu
ca. 2 Wochen ab Auftragse
Niederlande
3880
100 x 2.000 mm
20 - 76,1 mm
1
1
3 kW
220 kg
Ikufz98
The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind...
width of the strips 100 mm
band length 2000 mm
band speed 15/30 m/sec
tube diameter 20 - 76 mm
angle adjustable from - to 30 - 90 Grad
connected load frequency 400 V
total power requirement 2,5 /3,3 kW
weight of the machine ca. 0,19 t
dimensions of the machine ca. 1,2 x 0,75 x 0,7 m
V2dicwdz
Pipe grinders/notchers
ALMI pipe grinders are built solidly, because these machines run at high speeds. That is why stability has a major impact on the end result.
2 IN 1 PIPE GRINDER
The new AL150HS has a belt speed of 45 m/s due to its unique transmission. When you open the rear cover, you can also use the pipe grinder as a belt sander, ideal for deburring cut profiles. The AL150HS has the option of being operated by means of two handwheels or by means of a lever. Both options are available on...
Grinding diameters: Ø20 - Ø76,1 mm
Grinding angle: 30º – 90º
2sdpmuj2
Belt speed: 30 m/s, 2800 rpm.
Tire size: 100 × 2000 mm
Operation: Lever and handwheel operation
Including roll: Ø48,3 mm
Motor: 3 kW
Country of origin: The Netherlands
Machine weight: 210 kg
This machine is unused!
Pipe grinding machine make KNOPP type 301 RSG
Machine # 3577 Year of construction 1981
Technical data:
Grinding belt size 300 x 60 mm
size of pressure roller 200 x 60 mm
size of feed roller 120 x 60 mm
Drive power of the feed roller 0,15 kW
Drive power of the grinding belt 1,5 kW
Length of the transport rail 850 mm
B73ntiihgq
outer dimensions approx. 400 x 700 x 1500 mm
with
- aut. feed of the workpiece through the grinding position
used, in good condition
tube diameter 20 . 76,1 mm
Band Speed 30 m/sec
engine output 3 kW
grinding band dimension 100 x 2000 mm
voltage 230 oder 400 V
2905 U/min
dimensions 1450 x 1150 x 650 mm
weight 210 kg
Benm8g73kl
neu
ca. 2 - 4 Wochen ab Auftr
Niederlande
6290
119.51
1
150 x 2.000 mm
20 - 114,3 mm
1
1
4 kW
270 kg
The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second.
The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options.
The ...
Absolute Top off the line Pipe Grindingmachine.
The machines from Almy are developped and made in the Netherlands.
The ALMI AL100U-01:
Grinding Capacity: Ø20 mm - Ø76,1 mm
Grinding Angle: between 90 - 30 degrees
Motor: 3kW
Grinding belt: 2000x100 mm
- Controlled with a lever.
- 42,4 mm grinding role included with the machine
- 5 Grinding belts inculded with the machine
- quick changing off the grinding rolls aswell as the grinding belt.
B0y0llmqp3
*other grinding rolls and roll holder not sta...
- 2 Speed
- Angle adjustment
- Back of the machine can be used as a normal belt sander
- With 10 rolls
Camw9v9s
- Emergency stop
- Documentations
- 400V
Bernardo Belt Grinding Machine KBR 100 x 2000 Duo
belt dimension 100 x 2000 mm
belt speed 15 / 30 m/sec.
min./max. pipe diameter 20 - 76 mm
slide adjustment 30° - 90
surface grinding table 400 x 100 mm
contact wheel Ø x W 195 x 100 mm
suction connection Ø 2 x 100 mm
Speed 1410 / 2850 rpm
Motor output power S1 100% 2.2 / 2.8 kW (400 V)
Motor input power S6 40% 3.0 / 4.0 kW (400 V)
Machine dimensions (W x D x H) 750 x 1450 x 1160 mm
Weight approx. 158 kg
Features
Constant belt tension d...
Pipe arch grinding machine make GLASER type GRS 33-V
Machine # 188/07 Year of construction 2007
Technical data:
Grinding range 10 - 80 mm
grinding belt size 735 x 30 mm
infinitely variable speed 725 - 1450 rpm.
Mottor power 2,2 kW
power supply 380 V / 50 Hz
dimensions approx. 890 x 650 x 1350 mm
weight approx. 165 kg
with
- coolant device
- infinitely variable drive
Hspxd27
- lot grinding belts
used, in good condition
tube diameter 20 - 76,1 mm
engine output 3 kW
Band Speed 30 rpm
grinding band dimension 100 x 2000 mm
voltage 230 oder 400 V
Benm8qpb8m
dimensions 1450 x 1150 x 650 mm
weight 190 kg
gebraucht
2019
5505
Niederlande
2670
1
100 x 2.000 mm
20 - 76,1 mm
1
3 kW
190 kg
Eljnirpm
The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of ...
Engine: 4 kW
Voltages: 230V 3F, 400V 3F or 460V 3F
belt speed: 45 m/s, 4300 r/p
belt dimensions: 100×2000 mm / 150×2000 mm
grinding diameter: Ø20-Ø114.3
Grinding angle: 20 - 90
Nvbzv
Operation: Lever and manual wheel operation
2-in-1 pipe grinder
The new AL150HS has a belt speed of 45 m/s due to its unique transmission. When you open the tailgate, the pipe grinder can also be used as a belt grinder, ideal for deburring polished profiles. The AL150HS can be operated with two handwheels or with a ...
TUGRA PIPE GRINDER
TYPE TT 90
- Capacity 17-90 mm
- With 10 rolls
- Angle adjustment
Brn7cwlyef
- Paperwork
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
System for grinding radii on the face
sanding belt speed 15 + 30 m/sec.
sanding belt approx. 2340 x 75 mm
grinding belt motor 3 kW
Dimensions approx. 1450 x 650 x 1200 mm (L x W x H)
Weight approx. 135 kg
Made in the EU
Dxbune
neu
ca. 2 - 4 Wochen ab Auftr
Niederlande
5170
98.23
Svaoxs
150 x 2.000 mm
20 - 114,3 mm
1
1
4 kW
270 kg
The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options.
The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.
The ALMI AL150 can be ...
Engine: 4 kW
belt speed: 30 m/s, 2800 rpm
belt dimensions: 100×2000 mm / 150×2000 mm
grinding diameter: Ø20-Ø114.3
Grinding angle: 20 - 90
Operation: Lever and manual wheel operation
Weight: 260 kg
Easy to operate
The AL150 can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150 you can grind material from Ø20 to Ø114.3 The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ...
TUGRA PIPE GRINDER
TYPE TT 140
- Capacity 40-140 mm
- With 3 rollers
- 2 Speed
- Horizontal/vertical
- Angle adjustment
Brn290sf3q
- Sanding belt dimensions 150 x 2000 mm
- Power supply
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
ISITAN PIPE GRINDER
TYPE PN-2076
- Capacity 20-76 mm
- With 7 rolls
- Angle adjustment
- Paperwork
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
Kin8nzqb
AYEL-TECH PIPE GRINDER
TYPE TT 90
- Capacity 17-90 mm
- With 10 rolls
- Angle adjustment
- Paperwork
D8tnbbqui
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
AYEL-TECH PIPE GRINDER
TYPE TT 76
- Capacity 16-76 mm
- With 10 rolls
- Angle adjustment
- Paperwork
- 400V
CALL FOR MORE INFO
D8tec8h2k
DUTCHMACH
Metalworking machines
ENSCHEDE
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.