Used cnc lathe

Moriseiki NL-2500SY

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Lrjdpfx Asy N Tqbsa Esl Driven tools C-axis Y-axis Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Technical data and specifications subject to change and error. Sale subject to prior sale.

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Technical data are shown on picture. Ljdpfx Aajwb Aqne Esrl

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" Lredpfx Aey N Tpkea Esl The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Lodpey Nyzgefx Aa Eorl Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Lrjdpfx Aastylazo Esl 4th axis unit Swarf auger Lighting Coolant system Enclosed guarding

Condition: used, Year of construction: 2005, Technical details: turning diameter: 356 mm turning length: 705 mm control: MSX 850 MAPPS II swing dia.: 755 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 (+-50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min rapid traverse Y-axis: 10 m/min Rapid travel B-axis (parts transfer subspindle): 30 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 6000 1/min Spindle 2 power: 11 / 7,5 kW turret stations / rotary tool stations: 16 / 16 VDI 30 : 5.5/5,5/3,7 kW speed of driven tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m Accerories Chip conveyor Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by MAPPS II Control. * Ledpfx Aey H R D Tsa Esrl

Condition: used, Year of construction: 2011, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 30,000 m/min, Mori Seiki NL2500SY-700 Brand: Mori Seiki Model: NL2500SY-700 Category: CNC Lathe Year: 2011 CNC Control: Mori Seiki MSX-850 IV Machine weight: 6.2 tons Capacity Max. swing over bed: Ø 579.8 mm Max. swing over carriage: Ø 755 mm Max. turning diameter: Ø 356 mm Max. turning length: 705 mm Bar capacity: Ø 80 mm Axis travels X-axis: 260 mm Y-axis: ± 50 mm (100 mm total) Z-axis: 795 mm C-axis: ± 360° Main spindle Spindle diameter: 254 mm Speed: 4,000 rpm Spindle nose: ASA-8 C-axis indexing: 0.001° Power: 18.5 kW (cont./30 min) Sub spindle Speed: 5,000 rpm Spindle nose: ASA-6 C-axis indexing: 0.001° Power: 15 kW (cont./30 min) Lrodpeyxmh Sjfx Aa Esl Turret 12 driven tool stations Tool speed: 6,000 rpm Tool power: 5.5 kW Turning tools: 25x25 mm Boring: Ø 50 mm Feed rates Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 30,000 mm/min Rapid traverse Z-axis: 10,000 mm/min C-axis: 400 rpm Accessories Static toolholders + 4 driven (2 radial, 2 axial) Chip conveyor + tank Top Automazioni – Magic bar feeder Electrical transformer Part unloading arm 250-liter coolant tank Manuals + electrical diagrams CE Declaration

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 Lredpfx Aasu Idfrj Esl *

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, spindle motor power: 18,000 W, overall weight: 5,800 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2007, featuring a sub-spindle and a 12-station motorized turret. It includes main and sub-chucks of 250 mm and 210 mm, respectively, and a bar capacity of 80 mm. The machine offers a spindle speed of 4,000 rpm and a tool speed of 6,000 rpm. Consider the opportunity to buy this MORI SEIKI NL 2500 SY horizontal machine centre. Contact us for more information about this machine. Additional equipment Lrsdpfx Aaeyaiqkj Ejl • Renishaw tool measurement arms (2) • Communication: USB, PCMCIA, RS-232 • Bar feeder interface • Automatic parts catcher • Independent chuck pedals • Chip extractor: hinged lateral Machine Benefits Technical Machine Benefits • Sub-spindle motor: 15 kw • Tool motor: 5. 5 kw (torque 640 nm) • Tool speed: 6000 rpm • Turret index: 0. 2 sec • 12-station motorized turret • Oil cooler: daikin • C-axis: both spindles Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2011, Control system MXS 850 IV Data: Max Swing over bed 755 mm Max swing over support 740 mm Max Turning diam. 366 mm Turning length 785 mm Movements X 260 mm Y 100 +-50 mm Z 795 mm Rapid transport X/Y/Z 30/20/50 m/min Spindle power 26/22 kW Spindle speed 4,000 rpm Bar Capacity 80 mm Lredpfx Aasyilzhs Eel Chuck diameter 250 mm Spindle nose JIS A2-8 Spindle indexing 0.001° Sub Spindle power 11/7,5 kW Sub Spindle speed 6,000 rpm Sub Bar cap. 80 mm Sub spindle Chuck diameter 150 mm Sub Spindle nose JIS A2-5 Sub Spindle indexing 0.001° Number of tools in turret/driven 12/12 pcs. Power driven tools 5.5 kW Spindle speed driven tools 6,000 rpm Machine weight 6,200 kg Machine dimensions LxWxH 4.34 x 2.00 x 2.120 m Equipment: Chip conveyor, 3-jaw chuck Kitagawa BB-210 in main Spindle and a Kitagawa B 206 in Sub Spindle, Part catcher, Various tool holders, Parts catcher, Interface for Bar-Feed, Synchronised threading, The machine has 17800 work hours.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 795 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] COUNTER-SPINDLE - Spindle nose : A2-5 - Max. bar diameter : 51 [mm] - Max. turning diameter : 190 [mm] - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 760 [mm] POWER SUPPLY - Supply voltage : 200 [V] Lrsdox Tvkropfx Aa Eol - Total installed power : 42 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.414 x 2.370 [mm] - Machine height : 2.115 [mm] - Machine weight : 6.200 [kg] MACHINE HOURS - Number of hours under power : 15525 [h] - Number of working hours : 12865 [h] EQUIPMENT - CNC : Mitsubishi MSX-850II - Interactive programming : MAPPS III - Interface : USB / PCMCIA / RJ45 - Tool probe : Renishaw - 3 colors status lamp - Tailstock function - Coolant tank - Chips conveyor : Droite - Spindle cooling unit - Parts catcher - Bar loader : LNS Quick LoadSERVO 80 - Parts conveying strip - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Chuck 3 jaws