CNC turning and milling center

Mori Seiki NL3000MC/2000

Condition: excellent (used), Year of construction: 2013, operating hours: 60 h, functionality: fully functional, machine/vehicle number: NL254131163, spindle motor power: 18,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,050 mm, overall weight: 6,100 kg, MORI SEIKI NLX2500Y-700 Turning Cente Dimensions • Machine Depth: 3056 mm • Machine Height: 2187 mm • Machine Weight: 6140 kg Movement • Number of Axes: 5 • X-axis Travel: 260 mm • Y-axis Travel: 50 mm • Z-axis Travel: 795 mm Technical Specification • Spindle Speed: 4000 RPM • Tool Stations: 12 Additional Information • Swing over bed 920 mm • Swing over the cross-slide 742 mm • Maximum cutting diameter :366 mm • "maximum cutting length: 705 mm • Bar capacity: 80mm Dwjdpfxjzukn Ej Akcec • Spindle motor power: 18. 5/15kw • Milling motor power: 5. 5kw, speed 10000 rpm • Rapid feedrates: xyz: 30 x 10 x 30m/minute • Tool setter, parts catcher, swarf conveyor • 3 jaw chuck, interlocked guards, low volt light Spindle nose: ASA 8" Tailstock: MT5 Tailstock quill diameter: 80 mm Tailstock travel: 734 mm Turret stations: 12 positions Motorized tool positions: 12 Turret tool coupling: BMT Turning tool size: 25 × 25 mm Boring bar capacity: 50 mm Maximum driven tool speed: 6,000 rpm Driven tool motor power: 5.5 / 7.5 kW C-axis0.001° indexing Additional equipment Chip conveyor

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm Dodpfxjyuqaco Akcowc MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: good (used), Year of construction: 2016, Contact us for more information Dwodsy Enr Sopfx Akcsc

Condition: ready for operation (used), Year of construction: 1985, A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible. Djdpfewaa Iuox Akcewc

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 1,800 mm, grinding width: 850 mm, total height: 2,955 mm, total length: 6,650 mm, total width: 3,645 mm, grinding height: 750 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 5 m/min, grinding wheel diameter: 457 mm, table load: 2,160 kg, grinding wheel width: 203 mm, spindle speed (max.): 1,400 rpm, overall weight: 13,000 kg, grinding spindle motor power: 30 W, travel distance X-axis: 1,820 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 820 mm, rotational speed (max.): 1,400 rpm, WORKING CAPACITY: Max. grinding length: mm 1.800 Max. grinding width: mm 850 Max. grinding height: mm 750 GRINDING WHEEL HEAD: Power: kW/HP 30/22 Grinding wheel dimensions: mm 457 x 203.2 x 100 Grinding wheel speed: rpm 1.400 LONGITUDINAL TABLE AXIS: Speed: m/min 1 ÷ 40 Dwsdpfoztzyvsx Akcoc Maximum load (with magnetic table): kg 2.160 Grinding table dimensions: mm 1.800 x 600 Working stroke: mm 1.820 TRANSVERSE GRINDING HEAD AXIS: Rapid traverse speed: m/min 5 Adjustable incremental feed: mm 1 ÷ 50 Continuously adjustable feed rate: mm/min 0 ÷ 2.000 Minimum working increment: mm 0.001 Working stroke: mm 750 VERTICAL GRINDING HEAD AXIS: Rapid traverse speed: m/min 1.5 Minimum working increment: mm 0,001 Working stroke: mm 820 OVERALL DIMENSIONS: Length: mm 6.650 Width: mm 3.645 Height: mm 2.955 Total weight: kg 13.000 Machine complete with: • Instruction manuals and CE Declaration of Conformity

Condition: used, Year of construction: 2012, turning diameter max. 356 mm turning length 1.255 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm distance between spindles 1.511 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW Dwedjz Dbqtjpfx Akcoc spindle nose JIS A2-8 spindle bore 91 mm max. bar capacity 80 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm x-travel 260 mm z-travel 1.345 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 50 kVA weight of the machine ca. 7,8 t dimensions of the machine ca. 6,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 1250 - Subspindle - WITHOUT extraction system

Condition: ready for operation (used), Year of construction: 2013, operating hours: 8,460 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,345 mm, spindle motor power: 18,500 W, bar diameter (max.): 80 mm, controller manufacturer: MITSUBISHI, controller model: M-730BM(MAPPS 4), number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI NLX2500SY/1250 was manufactured in 2013. It features a maximum X-axis travel of 260 mm, Y-axis travel of +/- 50 mm, and Z-axis travel of 1345 mm. The machine is equipped with a 12 station turret with milling function and a spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX2500SY/1250 horizontal turning machine we have for sale. Contact us for further details. • Spindle 1: 18,5/15 kW, 4000 rpm; hollow spindle Ø 91 mm • Spindle 2: 11/7,5 kW, 6000 rpm; hollow spindle Ø 43 mm • Turret: Sauter 12-station with milling function, 6000 rpm • Y axis present • Stroke end detection • Bar feeder interface (prepared) Additional equipment • Automatic door (not original) Dodpozxpq Hefx Akcjwc Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 6,100 kg, number of axes: 4, This 4-axis DMG Mori Seiki NL2500Y/700 was manufactured in 2006. It features a robust control unit, MORI SEIKI MSX-850, and includes an integrated mist extraction unit, chip conveyor, tailstock, turret, and tool setter. With a mass of 6100 kg, this turn-mill centre is designed for high-performance machining. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki NL2500Y/700 machine we have for sale. Contact us for further details. - Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 113 A- Current Rating of the Spindle Motor: 140 A- Interrupting Capacity: 5 kA- Short Circuit Rating: 1 kA- Rated Power: 39 kVA- Mass of Machine: 6100 kg- Control Unit: MORI SEIKI MSX-850- Additional Equipment / Attachments: Integrated mist extraction unit (SARA UC1 SDIV), chip conveyor / chute integration, tailstock, turret, tool setter / probe arm Technical Specification Djdpjz A Uz Njfx Akcjwc Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2019, operating hours: 2,305 h, functionality: fully functional, TAKISAWA - LA-250YS cnc lathe + FMB Turbo 8-80 barfeeder - number of spindles 2 - swing over bed 600 mm - max turning diameter 370 mm - spindle speed 3500 rpm - bar dia max 75 mm - main spindle; 52 mm - subspindle - turning length 737 mm - turret 12, all driven, 4000 rpm - weight 8000 kg (only the lathe) Dedpfey Sm Ulox Akcswc - additional equipment: collet systems on both spindles, barfeeder, filter, high pressure pump, spindle cooling, part catcher, part conveyor, crane for heavy materials, tool holders, collets

Condition: used, Year of construction: 1995, overall weight: 5,500 kg, center distance: 650 mm swing over bed: 520 mm bar capacity: 78 mm Dwjdpoz Eaiqefx Akcsc tool turret: 10 tools maximum spindle speed: 3500 rpm weight: 5500 kg