MORI SEIKI NHX 5000

MORI SEIKI NHX 5000

Condition: good (used), functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale used Mori Seiki NHX5000 horizontal machining centre in excellent condition. Fodpfx Aksuf S Rzersgd Model: NHX-5000/40 Year: 2012 The machine is available on site by prior arrangement. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV Fsdpfx Aeyt Hwzskrjgd • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2012, operating hours: 45,656 h, functionality: fully functional, machine/vehicle number: AX4E -NAOS 12-160, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. spindle speed: 12,000 rpm Spindle drive power: 15 / 11 kW Max. torque: 102 Nm Tool holder: SK 40 Distance spindle center to table: 80 - 800 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 x 500 mm Max. workpiece weight: 500 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 s Indexing time: 1.49 s Number of tool stations: 60 Max. tool diameter: 70 mm Max. tool diameter with adjacent stations free: 170 mm Max. tool length: 550 mm Tool-to-tool change time: 0.9 s Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Creep feed range: 0 - 5,000 mm/min MACHINE DETAILS Total power requirement: 34 kVA Dimensions & Weight Footprint: approx. 5500 x 3000 x 2800 mm Machine weight: approx. 11.1 t Operating hours: 45,656 h EQUIPMENT Fsdpox I Amiofx Akrsgd Chip conveyor Coolant system Internal coolant supply IF Knoll Tool changer B-axis Pallet changer Oil mist separator Magazine tool breakage control Thread milling Note: Proof of spindle replacement in 2019 is attached.

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Fgjdpfx Akewcd Evored Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter Fsdpfx Asykpg Hskrjgd MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,700 mm, total length: 4,000 mm, total width: 2,400 mm, table width: 400 mm, table length: 400 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,383 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a horizontal machining center from the manufacturer Doosan. Fedeyl Iu Espfx Akrogd Operating hours: 11,320 h Spindle hours: 6,383 h The machine is in very good condition and can be inspected under power in our facility. Both clamping towers are included in the scope of delivery. Manufacturer: Doosan Model: HC 400 Year of manufacture: 2011 Control: Fanuc Series 32i-MODEL A Technical data: Travel X-Y-Z: 600x560x565 mm B-axis: 1° increment (indexing table) Rapid traverse X-Y-Z: 40 m/min Feed rates: 20,000 mm/min Pallet size: 400x400 mm Spindle speed: 8,000 rpm Tool holder: SK40 Machine weight: 11,000 kg

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer Fgsdpfx Akoxcp R Usred - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2003, CNC controller: MSX-501 Axes X-axis travel mm: 630 Fgjdpfx Asxq Hckokrjd Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis degrees: 360º (0.001º indexing) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 8,000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Signal lamp High-pressure pump Internal coolant supply

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,033 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D SolutionLine, overall weight: 16,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details. Fgjdpfjy Ryyrex Akred • Power capacity: 103 kVA • Current (In max): 148 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Measuring system: Direct, absolute, photoelectric • Resolution (X, Y, Z): 0.001 mm • Position tolerance (X, Y, Z): 0.007 mm (Standard) / 0.006 mm (with Accuracy Package) • Position tolerance A-axis: 9 ws (Standard) / 8 ws (with Accuracy Package) • Position tolerance B-axis: 8 ws (Standard) / 6 ws (with Accuracy Package) • Position tolerance C-axis: 7 ws (Standard) / 5 ws (with Accuracy Package) • Table height (top of pallet to floor): 1120 mm • Distance spindle center to table: 150 mm (minimum distance, Motor spindle) / 145 mm (Gear spindle) Technical Specification Taper Size HSK 100

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Mori Seiki (Fanuc), controller model: MSX-701 (Fanuc 31i), workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,200 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 4,300 mm, spindle speed (max.): 8,000 rpm, coolant supply: 70 bar, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Mori Seiki. The machine is fully functional, in good condition, and can be inspected and tested at our facility. Manufacturer: Mori Seiki Model: NH8000 DCG Year of manufacture: 2008 Control unit: MSX 701-III Technical specifications: Travel distances X-Y-Z: 1400 x 1200 x 1350 mm B-axis: 0.001° Feed rate X, Y, Z: 50,000 mm/min Rapid traverse X, Y, Z: 50 m/min Pallet size: 800 x 800 mm Fodpfxeyrdn Us Akregd Number of pallets: 2 Pallet change time: 16 s Max. workpiece weight: 2200 kg Max. workpiece diameter: 1450 mm Max. workpiece height: 1450 mm Spindle speed: 8000 rpm Spindle power: 37 kW Tool holder: HSK-A100 Tool magazine: 60 positions Tool change time: 1.9 s Distance between pallet surface and spindle center: 100–1300 mm Distance between pallet center and spindle nose: 100–1450 mm Total power consumption: 86 kVA Machine dimensions: approx. 7200 x 4300 x 3850 mm Transport dimensions machine: approx. 7000 x 3400 x 3300 mm Machine weight: approx. 30 t Total weight incl. magazine and accessories: approx. 37 t Scope of delivery includes: 1x Mori Seiki NH8000 DCG machine 1x Matrix tool magazine 1x chip conveyor 1x coolant system 1x transformer Various tool holders