CNC LATHE

Miyano BNE 51-S

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: BE55324S, turning length: 300 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 8,000 mm, total width: 2,000 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 18i-TB, MIYANO BNE 51 S CNC lathe Iasdpfox T Aiuex Ad Nsl - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Connection load: 36 kW The machine is equipped with a main and counter spindle, each fitted with a HAINBUCH chuck, as well as a double turret, each with 12 tool stations. It also includes a bar feeder from BREUNING SIMAG, model: 42.1 R-3000. Attention: The item must be collected between 18 and 26 February 2026 on a date to be agreed upon. FCA D-78087 Mönchweiler – loaded onto truck

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank HR 410 Handwheel iTNC530 controller 1e owner machine X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm Iaedpfx Adsx R S Smo Nel A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1998, machine/vehicle number: 98BE510071, turning length: 90 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 11 W, overall weight: 6,300 kg, bar passage: 51 mm, 12 position upper turret (6 are driven) -10 position lower turret (5 are driven) - sub spindle - 2 x C axis - equipped with Lns Sprint S2 bar loader with front magazine, fixed and driven tool holders, manuals - Fanuc 18T Control Iedpjwidp Isfx Ad Neal

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 900 - Type of digital readout: 2 assen - Control: Conventional - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ijdpjwnitijfx Ad Neal Lukas van Rossum

Condition: used, Year of construction: 2019, turning diameter 230/300 mm turning length 452 mm greates pass round over bed 700 mm control Siemens 828 D Shop turn spindle passage 65 mm spindle speed: 4500 U/min spindle motor 15/11 kW max. torque on the spindle 179 Nm no. of tools in turret 1 12 BMT 55 driven stations 12 BMT 55 speed of driven tools 5000 U/min drive milling spindle 5,6/3,7 kW y-axis +/- 60 mm sup spindle 7,4/4,9 kW Spindlespeed subspindle 6000 U/min rapid traverse 36/36/10 m/min tail stock Gegenspindle/Subspindle range L-W-H 3,9 x 1,65 x 2,0 mm weight of the machine ca. 4,7 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Ø 210 mm main spindle - 3 jaw chuck Ø 135 mm sub spindle - chipconveyor - parts catcher with box in door Iaodpfoww Nanjx Ad Njl - Tool measurung - 2 + 2 driven toolholder - some fixed toolholder - signal lamp 3 colours - 15 bar coolant - double coolant filter

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Iajdpfox S I Aksx Ad Nel

Condition: used, controller manufacturer: Heidenhain, controller model: i TNC 530i, For sale: Hermle 5-axis machining centre type C 800U (5-axis simultaneous) equipped with a Heidenhain i TNC 530i control. The machine is in good condition and available from stock, subject to prior sale. The machine features a table size of Ø 630 mm. X, Y, and Z axis travels are 800 x 600 x 500 mm. The machine also offers a maximum spindle speed of 16,000 rpm, spindle cooling with a maximum pressure of 40 bar. Included are a Heidenhain probe, a Stark zero-point clamping system, and a chip conveyor. Iasdex Ry Nmspfx Ad Nel

Year of construction: 1988, condition: good (used), TOS SN 50 B (1988) Manufacturer: TOS Model: SN 50 B Year of manufacture: 1988 Type: Universal centre lathe Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Distance between centres: 1500 mm Bed width: 300 mm Spindle bore: 52 mm Spindle speed range: 22 – 2000 rpm Iajdoxl Tt Sepfx Ad Nol Spindle nose: Camlock D1-6 Spindle motor power: 7.5 kW Longitudinal feed range: 0.04 – 2.24 mm/rev Cross feed range: 0.02 – 1.12 mm/rev Metric threads: 0.5 – 224 mm Inch threads: 56 – 0.25 TPI Module threads: 0.25 – 112 mm DP threads: 112 – 0.25 DP Tailstock quill diameter: 75 mm Tailstock quill travel: 160 mm Tailstock taper: Morse 5 Machine length: approx. 2800 mm Machine width: approx. 1100 mm Machine height: approx. 1300 mm Machine weight: approx. 2000 kg

Condition: used, Year of construction: 2010, travel -x axis 630 mm travel -y axis 765 mm travel -z axis 600 mm control MAZATROL Matrix number of spindle speeds 18.000 U/min a-axis +30 ~ -120 ° c-axis +/- 360 max. working diameter 730 x 500 mm 0 500 mm numbers of positions in the tool changer 80 tool taper HSK 63T 5-axis simultaneous machining center | MAZAK - Variaxis 630-5X II T equipped with a rotary function (turntable) Iedpfx Adox Avtio Noal The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Variaxis6305XIIT | Variaxis 630 5X II T | Variaxis-630 5X II T

Condition: excellent (used), Year of construction: 2010, 412mm max. machining diameter, maximun turning length 753mm, 225 degree movement on B axis, 15HP spindle motor power, 6,000rpm spindle speed, 6,000 rpm sub spindle speed, 52mm bar capacity, Iasdpfx Adewxw A He Nel milling speed 12,000rpm C axis & Milling, 9 station lower turret. Swarf conveyor, tool setter, Coolant, Interlocked guards, Swivelling Universal Head., C Axis (0.001deg), Mazatrol Matrix control