Used Leadwell for sale (21)

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, machine/vehicle number: L2TAF0101, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 30 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, total height: 2,500 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 450 mm, table length: 860 mm, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, input voltage: 400 V, input frequency: 50 Hz, Equipment: chip conveyor, documentation/manual, LEADWELL V-30 iV CNC Vertical Machining Center - Tool holder: BT 40 - Table with three T-slots Tjdpfx Abs Afuu Isaed - Includes documentation and chip conveyor The machine is equipped with a tool changer, including the tool holders from the changer. FCA D-94227 Zwiesel – loaded onto a truck.

Condition: like new (used), Year of construction: 2012, operating hours: 5,607 h, functionality: fully functional, 2012 LEADWELL MCV 1500i+ (4 Axis) VMC Category: Vertical Machining Centers (VMC) Reference No.: 400140 Capacity: 1520 X 1016 X 720 MM Tjdpfx Abex Ehibsaed Year of Construction: 2012 Technical Specification: SPINDLE Spindle Taper : CAT/BT 50 Spindle Speeds : 4000 RPM WORKING CAPACITY Table Size : 1550 x 1000 mm Travels (XYZ) : 1520 x 1016 x 720 mm Spindle Nose to Table (Min.- Max.) : 120 - 840 mm ATC Tool Change Capacity : 24 Tools ATC Type : ARM CNC Control : Fanuc Oi-MD Additional Details: 12" 4th Axis

Condition: new, Year of construction: 2018, functionality: fully functional, turning length: 3,060 mm, turning diameter: 494 mm, spindle speed (max.): 2,000 rpm, overall weight: 17,500 kg, controller model: Fanuc 0i-TD, An unused CNC lathe is for sale! TECHNICAL DETAILS Maximum turning diameter: 800 mm Turning diameter: 494 mm Maximum turning length: 3,060 mm Spindle speed max.: 2,000 rpm Bar capacity: 115 mm X-axis travel: 300 + 20 mm Z-axis travel: 3,100 mm Tjds Aaavaopfx Abaed Chuck: 15″ Spindle nose: A2-11 Tool stations: 12 Boring bar diameter: 50 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Tailstock diameter: 110 mm Tailstock taper: MK 5 Incline: 45° MACHINE DETAILS Control model: FANUC 0i-T C-axis: Duplomatic VDI60 Spindle motor power: 30 kW Motor power X-axis: 4 kW Motor power Z-axis: 7 kW Electrical connection: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,120 x 2,310 mm Machine weight: approx. 17,500 kg EQUIPMENT Linear scale on the X-axis Hydraulic steady rest SMW SLUB-5 D50-D310 Tool presetter Renishaw HPMA Warning light Chip conveyor High-pressure pump (10 bar)

Condition: new, Year of construction: 2018, functionality: fully functional, turning length: 3,060 mm, turning diameter: 494 mm, spindle speed (max.): 2,000 rpm, overall weight: 17,500 kg, controller model: Fanuc 0i-TD, An unused CNC lathe is for sale! TECHNICAL DETAILS Maximum turning diameter: 800 mm Turning diameter: 494 mm Maximum turning length: 3,060 mm Spindle speed max.: 2,000 rpm Bar capacity: 115 mm X-axis travel: 300 + 20 mm Z-axis travel: 3,100 mm Chuck: 15″ Spindle nose: A2-11 Tool stations: 12 Boring bar diameter: 50 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Tailstock diameter: 110 mm Tailstock taper: MK 5 Incline: 45° MACHINE DETAILS Control model: FANUC 0i-T C-axis: Duplomatic VDI60 Spindle motor power: 30 kW Motor power X-axis: 4 kW Motor power Z-axis: 7 kW Electrical connection: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,120 x 2,310 mm Machine weight: approx. 17,500 kg EQUIPMENT Linear scale on the X-axis Teds Aaa E Ujpfx Abaed Hydraulic steady rest SMW SLUB-5 D50-D310 Tool presetter Renishaw HPMA Warning light Chip conveyor High-pressure pump (10 bar)

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 1270 x 600 x 610mm, 24 station tool changer, table 1420 x 580mm, 18.5kW motor power, spindle taper BT40, spindle speed 40 – 10,000rpm, FANUC Control, Tedezu Nx Aepfx Abajd low volt light, coolant,

Condition: used, Year of construction: 2006, Equipment: documentation/manual, Control Fanuc 0M Two palletes Table dimensions – 650x420 mm Axes: X 580mm, Y 420 mm, Z 490 mm Spindle 12 000 rpm, SK40 Todpfxozxxv Ej Abaed Machine dimensions 2500 x 2100 x 2500 mm Machine weight 3900 kg

Condition: ready for operation (used), Year of construction: 2025, operating hours: 600 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 225 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 800 mm, spindle motor power: 18,500 W, total height: 2,365 mm, total width: 2,085 mm, overall weight: 8,900 kg, controller manufacturer: FANUC, controller model: 0iTF PLUS, product length (max.): 4,210 mm, number of axes: 5, This 5-axis Leadwell LTC-25iSMY was manufactured in 2025. It features a maximum turning diameter of 590 mm and a turning length of 770 mm. The machine is equipped with a powerful spindle speed of 3500 rpm and a robust tool head with 12 positions. If you are looking to get high-quality turning capabilities, consider the Leadwell LTC-25iSMY horizontal turning machine we have for sale. Contact us for further details regarding this machine. • Capacities • Max. turning diameter above the bed: 590 mm • Max. turning diameter above the transverse support: 590 mm • Max. turning diameter: 430 mm • Max. turning length: 770 mm • Max. rod diameter: 78 mm • Max. workpiece weight: 39 kg • Axes and travels • Z2 (counterspindle) travel: 780 mm • Min. C1 axis positioning increment (main spindle): 0.001 • Min. C2 axis positioning increment (counterspindle): 0.001 • Main spindle • Chuck size: 254 mm • Spindle taper: A2-8 • Spindle bore: 89 mm • Spindle drive type: Fanuc A P30/6000i • Counterspindle • Max. speed: 4000 rpm • Chuck size: 210 mm • Taper: A2-6 • Max. rod diameter: 66 mm • Power: 15 kW • Spindle drive type: Fanuc A 12/7000i • Turret / tooling (EWS tool head) • Clamping system diameter: BMT65 • Number of positions: 12 • Max. external tool size: 25 x 25 mm • Max. internal tool clamping diameter (threading): 40 mm • Neighbor tool change time: 0.8 s • Max. tool change time: 1.3 s • Max. speed of driven tools (axial): 4000 rpm • Max. speed of driven tools (radial): 4000 rpm • Rotary tool drive power: 4.5 kW • Rapid feeds • X: 15,000 mm/min • Z: 20,000 mm/min • Y: 7,500 mm/min • Z2 (counterspindle): 20,000 mm/min • Control • Fanuc 0iTF PLUS with 15" LCD, Manual Guide i, Ethernet • Machine input: 65 kVA Additional equipment • Collet clamping • Hydraulic chuck 254/3 (10"), bar max Ø77 mm, 3500 rpm • Renishaw HPMA tool probe (motorized arm) • High-pressure coolant 20 bar through tool head • Workpiece blow-off nozzle above main spindle • Workpiece blow-off nozzle above counterspindle • Cassette chip conveyor with chip container Todpfx Abozw D Drsaod • Counterspindle with chuck 203/3 • Workpiece removal shovel with container • Preparation/interface for bar feeder • Beacon alarm (machine status light) • Oil separator for coolant emulsion (from lost lubrication) • 3 pcs axial rotary unit BMT65 • 3 pcs radial rotary unit BMT65 • 4 pcs double-sided holder for external turning BMT65 • 4 pcs double-sided holder for internal turning BMT65 • 1 pc single-sided holder for internal turning • Filtermist extraction FX5002 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: not inspected (used), Year of construction: 1995, travel distance X-axis: 650 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Mitsubishi, controller model: Meldas 50 M, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle nose: SK 40, Vertical Machining Center Manufacturer: LEADWELL Model: VMC 25 Year of manufacture: 1995 Control: Mitsubishi Meldas 50 M Tsdpfozz S R Ujx Abaod Technical specifications: - X-axis travel: 650 mm - Y-axis travel: 410 mm - Z-axis travel: 410 mm - Max. spindle speed: 6,000 rpm - Tool holder: SK 40 - Machine weight: approx. 4,200 kg - Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,267 mm, travel distance Y-axis: 632 mm, travel distance Z-axis: 498 mm, controller manufacturer: FANUC, controller model: 18i-MB, table load: 850 kg, overall weight: 6,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Leadwell MV-50i was manufactured in 2003. It features an X-axis travel of 1,267 mm, Y-axis travel of 632 mm, and Z-axis travel of 498 mm. The machine includes a table size of 1,417 × 607 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the Leadwell MV-50i vertical machining centre we have for sale. Contact us for further details. • Table size: 1,417 × 607 mm • Spindle taper: CAT 40 Todpfx Abj Aa A Daeaod • Coolant through spindle: Depending on configuration Additional equipment • Chip conveyor: Depending on configuration

Condition: good (used), Year of construction: 2006, functionality: fully functional, Leadwell horizontal machining center Model: LCH-500 Year: 2006 Table size: 500 x 500 mm Control unit: Fanuc O-i MC X-axis travel: 700 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Maximum spindle speed: 10,000 rpm Spindle connection: ISO 40 Spindle power: 18.5 kW Tjdpfx Asz An Urobajd Chip conveyor (belt type) Pallet changer High-pressure system at 20 bar through the spindle

Condition: new, Year of construction: 2018, functionality: fully functional, turning length: 3,060 mm, turning diameter: 494 mm, spindle speed (max.): 2,000 rpm, overall weight: 17,500 kg, controller model: Fanuc 0i-TD, An unused CNC lathe is for sale! TECHNICAL DETAILS Maximum turning diameter: 800 mm Turning diameter: 494 mm Maximum turning length: 3,060 mm Spindle speed max.: 2,000 rpm Bar capacity: 115 mm X-axis travel: 300 + 20 mm Z-axis travel: 3,100 mm Chuck: 15″ Spindle nose: A2-11 Tool stations: 12 Boring bar diameter: 50 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Tailstock diameter: 110 mm Tailstock taper: MK 5 Incline: 45° MACHINE DETAILS Control model: FANUC 0i-T C-axis: Duplomatic VDI60 Spindle motor power: 30 kW Motor power X-axis: 4 kW Motor power Z-axis: 7 kW Tedpez Ar Rksfx Abasd Electrical connection: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,120 x 2,310 mm Machine weight: approx. 17,500 kg EQUIPMENT Linear scale on the X-axis Hydraulic steady rest SMW SLUB-5 D50-D310 Tool presetter Renishaw HPMA Warning light Chip conveyor High-pressure pump (10 bar)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 30,959 h, spindle speed (max.): 1,750 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 600 mm, total height: 1,945 mm, total width: 1,565 mm, overall weight: 4,500 kg, controller manufacturer: FANUC, controller model: Series Oi-TD, product length (max.): 2,800 mm, number of axes: 2, Horizontal turning machine manufactured in 2013. This Leadwell T-7 features a maximum turning diameter of 350 mm and a maximum turning length of 540 mm. It includes a 12-station hydraulic turret and a spindle speed of 1,750 rpm. If you are looking to get high-quality turning capabilities, consider the Leadwell T-7 machine we have for sale. Contact us for further details. • Maximum turning diameter: 350 mm • Maximum swing over bed: 520 mm • Maximum turning length: 540 mm • Spindle nose: A2-6 • Spindle bore: 62 mm • Maximum bar capacity: 65 mm • Chuck size: 8" hydraulic chuck • Turret: 12-station hydraulic turret • Rapid traverse (X/Z): 20–30 / 24–30 m/min Todozl Awgopfx Abaed • Tailstock: Hydraulic Additional equipment • Chip conveyor: Standard or optional Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2007, turning length: 1,000 mm, turning diameter: 600 mm, spindle bore: 115 mm, spindle speed (max.): 2,000 rpm, 2-axis CNC lathe Leadwell LTC-35C Year of manufacture 2007, Taiwan Todpfx Aezh Iwqsbasd Fanuc OiTC control system Max spindle speed 2000 rpm Gearbox with low/high range Chuck size 380mm Spindle bore 115mm Max turning diameter 600mm Turning length 1000mm Z-axis travel 1100mm Tailstock 12-tool turret Included with the machine: - Documentation - Chip conveyor - Chip tray with pump - Tool pallet

Condition: used, Year of construction: 2008, Palletized Machining Center LEADWELL FMC - 560 CNC FANUC 0i - MC Year of first installation: 2008 Table dimensions: 580 mm x 410 mm Travel: X: 560 mm Y: 420 mm Tsdsyft Ikopfx Abajd Z: 490 mm Spindle speed: 10,000 rpm Spindle power: 11 kW Tool magazine: 24 positions Chip conveyor Machine weight: 4,500 kg Complete with full documentation

Condition: excellent (used), Year of construction: 2011, Siemens Sinumerik 828D control system with ShopMill Travel ranges X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Measuring probe Tsdpfx Aozfx Uusbasd

Condition: used, Year of construction: 1990, functionality: fully functional, weight 4 t X - Y + Z-axis each 410 mm kN control Fanuc Axis 4 Todpfx Aouu S R Usbaed

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series 0i-MC, table width: 500 mm, table length: 500 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This Leadwell LCH-500 Horizontal Machine Center was built in the year 2006. It is equipped with a Fanuc Series 0i-MC control unit and has 3 axis. The machine has a spindle speed of 10000 rpm and is in good condition. Additional equipment • Chip conveyor Machine Benefits Tjdpfoyi Elvex Abasd Qualitative Machine Benefits • Good condition Technical Machine Benefits • Distance table-spindle nose 50-660 mm • Iso 40 spindle connection • Tool magazine 40 positions • Coolant pressure 20 bar

Condition: good (used), Year of construction: 2011, Traverses X Y Z: 1000 x 520 x 610mm, Todpfx Asx Dk I Rsbaod 24 station tool changer, Table 1100 x 500mm, spindle taper BT40, spindle speed 10,000rpm, 24 station ATC, FANUC OI-MD Control, 11Kw power, coolant.

Condition: good (used), Year of construction: 2010, Machine have live tools option and Y axis. Cutting tools not come. Parts shown by hand not come. Tedpfjxpw Nljx Abajd Technical details shown on pictures.

Condition: ready for operation (used), Year of construction: 1998, table mounting size: 765 x 400 mm movements x/y/z: 650/410/510 mm Tsdpfx Ajtwy Disbasd spindle taper: BT 40 min./max. distance table/spindle: ca. 90/690 mm spindle turning speed range: 80 - 8000 rpm number of tool positions: 20 pieces carriages: ca. 30 m/min rapid move: ca. 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2300 x 2100 x 2650 mm weight: 4000 kg

Condition: used, Vertical machining center LEADWELL MCV 610 CR CNC Fanuc 0M X 610 Y 510 Z 410 6000RPM ISO 40 The machine is in our warehouse in Gussago BS, under power Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets X axis: 610 Y axis: 510 Z axis: 410 CNC type: Fanuc Todetrbb Ejpfx Abaod Spindle revolutions: 6000