Used International B414 for sale (8,839)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing Itsdow Iquyjpfx Af Sjr -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Isdswwar Iopfx Af Sstr Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: used, machine/vehicle number: YS2G6X2000208xxxx, mileage: 375,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22077 Specifications: 2013 model EU approved until 15.02.2026 Mileage: 375,000 km Euro 5 Wheelbase: 490/135 cm 6x2 480 hp Full air suspension Retarder Internal length: 7.758 m Internal width: 2.454 m Internal height: 2.480 m Full side opening Tail lift Remote control Automatic transmission 2 bunks Climate control / AC Radio See video Description: 2013 Scania G480 6x2 box truck with full side opening.Four air tanks have been replaced on the vehicle.Delivery by agreement. Km: 375000 HK: 480 Technical approved: Yes EU-approved until: 15.02.2026 Own weight: 13120 Total Weight: 27000 Payload: 13805 Width: 255 Length: 1020 Inside width: 245 Inside lenght: 775 Inside hight: 248 Euro: 5 Model: 2013 Scania G480 6x2 skapbil med full sideåpning. Gearbox: Automatic Iodpfx Asx Ip A Dof Sjtr

Condition: used, Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bottom heads. Internal rated 2.5 bar design pressure at 150 deg.c. Unit mounted on (4) legs. Specifications: Capacity: 361.9 gal Diameter: 3.94' Height: 2.53' Iedpfsx Hwb Esx Af Sjtr Type Of Heads: welded dished top and welded cone bottom Vertical/Horizontal: vertical Type of stainless: 316L Legs/Lugs: 4

Condition: ready for operation (used), Metris coördinatenmeetmachine (CMM) gemaakt in het Verenigd Koninkrijk, nu eigendom van Nikon Metrology. Structuur van granieten basis met keramische brug en keramische Z-ram (LK Ceramic Bridge Technology) Geschikte probes: Renishaw PH10M/MQ, TP20, TP200, SP25M, SP80 of Nikon LC15Dx / LC50Cx laserscanners Laatste Kalibratie: 19-09-2024 Functies: Keramisch brugontwerp – zorgt voor dynamische stabiliteit en stijfheid Hoge nauwkeurigheid en snelheid voor dimensionele inspectie van grote of complexe onderdelen Geschikt voor contact- en laserscansensoren Typische toepassingen: lucht- en ruimtevaart, automallen, gereedschappen en precisiefabricage CAMIO MULTISENSOR CMM-SOFTWARE INLCUSIEF: Renishaw (optioneel): - Sonde-interface PI 200 - Interfaceselector IS1-2 - Renishaw PH10MQ - Nikon LC60D - Nikon LC15Dx - TP 200-sonde - SM25-1 - SM25-2 - SM25-3 - FCR 25 Autochange Rack - AOR3 Autochange Rack - Bol Renishaw + Motivair Luchtdroger Itodpfxoxl Hxnj Af Sjr

Condition: good (used), shelf length: 1,340 mm, shelf height: 2,000 mm, Technical specifications for the box rack: Racking system: Dexion Type: HI280 Setup details: Number of rack rows: 1 unit Rack length: approx. 1,340 mm Number of bays per rack row: 1 unit at 1,280 mm each Number of shelves plus base level: 4 units Scope of delivery includes: 02x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm including side panels The frames are pre-assembled 2,000 mm high 610 mm deep 04x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per unit: approx. 4.37 kg Maximum load per shelf with evenly distributed load: 100 kg 04x Shelf beams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 2 units Weight per unit: approx. 0.84 kg Material finish: Sendzimir galvanized 12x Folding box, used Manufacturer: Bekuplast Material color: grey Material: Polypropylene External dimensions: approx. 600 x 400 x 400 mm (LxWxH) Internal dimensions: approx. 555 x 360 x 385 mm (LxWxH) Height folded: 85 mm Stacking height: 75 mm Handles: open on short sides / closed on long sides Weight: 3.41 kg per unit 04x Levelling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Isdpfx Aow Idd Ief Sjtr Material finish: Sendzimir galvanized 01x Load sign indicating bay and shelf loads, manufacturer, and order number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only available for collection. Shipping or transport beyond collection is subject to additional costs, which can be provided upon request based on delivery location and scope.

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Ijdporualpjfx Af Sjtr Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, machine/vehicle number: W09SCUH3NDEN1xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 20702 Specifications: - 2013 model - 3 axles - Lift on 1 axle - Repair item - Internal height: 2.693 m - Internal length: 13.610 m - Internal width: 2.491 m - Lashings - Manual sliding roof - Full side opening - Ready for delivery Description: We have a 2013 HRD 3 axles capitol trolley repair item w/ full side opening for sale. The trolley is sold as a repair item as it is not EU approved and some additional costs must be expected. Ready for delivery Technical approved: no EU-approved until: 01.04.2025 Own weight: 8340 Total Weight: 45000 Payload: 36660 Width: 255 Iodpfx Afowqwnmj Sjtr Length: 1388 Model: 3 akslet kapelltralle ekt m/ full sideåpning

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Diameter: 1,800 mm Straight Side: 2,450 mm Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 bar Jacket Pressure: 9 bar Internal Temperature: 130°C Type of stainless: Stainless Steel Itsdpfox Hwbxox Af Sor Legs/Lugs: 4 Lugs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Isdjrtrzdspfx Af Sstr Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, machine/vehicle number: WDB9630201034xxxx, mileage: 269,220 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21642 Specifications: 2019 model 269,220 km (I want to know a little) Euro 6 engine 6x2 530 hp Automatic transmission Spring: full air Tires (see pictures) Refrigeration/freezing unit Zepro lift w/ remote control Longitudinal partition wall Objection length: 8,531 m Internal width: 2.493 m Internal height: 2,740 m P building: bus building Lift and swing on 3 axles Refrigerator Diesel heater Hang on. leather seats Air conditioning/ac Light Radio Ready for delivery Iodexq A T Ejpfx Af Sjtr Description: We have a 2019 Mercedes-Benz Actrox 6x2 box truck w/ refrigerator/freezer unit for sale. The car is in weekly operation and the mileage will therefore increase slightly. All services and maintenance are carried out at the workshop. There is also a service agreement on the generator. The starter motor and brakes on axle 2 have been replaced. Everything works as it should, according to the owner. Ready for delivery Km: 269220 HK: 530 Technical approved: Yes EU-approved until: 09.03.2026 Own weight: 14700 Euro: 6 Model: Actrox 6x2 skapbil m/ kjøl/frys aggregat Gearbox: Automatic

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Isdox Hv U Repfx Af Sjtr Specifications: Power: 11 kW

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm Iodertrvyspfx Af Setr -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, machine/vehicle number: YV2X9J0A0FA78xxxx, mileage: 371,740 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 20870 Specifications: - 2015 Model - 371,740 km - I-Shift - Euro 6 engine - 340 hp - Tires (see pictures) - 4x2 - Suspension: full air - Zepro Lift - Remote control - Internal width: 2,368 m - Internal height: 2,620 m - Internal length: 7,659 m - Arka body - Full side opening Isdpfjwv I Ihjx Af Setr - Air conditioning/ac - Lights - Ready for delivery Description: We have a 2015 Volvo Fm 330 4x2 Box truck w/ full side opening for sale. The car works as it should according to the owner. All services have been done by the owner himself. The car is EU approved and can be put straight into production. Ready for delivery Km: 371740 HK: 340 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 10650 Total Weight: 21000 Payload: 10275 Width: 255 Length: 1011 Euro: 6 Model: FM 330 Gearbox: Automatic

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. Includes 12 months warranty. In stock and immediately available. Specifications: Material Grade: 316L Stainless Steel Itjdpsx Hv T Tsfx Af Ser Dimensions: 1110mm diameter X 1230mm straight side

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Ijdpfx Aertryyef Sjtr Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: used, machine/vehicle number: YS2R6X4000218xxxx, mileage: 816,000 km, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 22062  Specifications: EU approved until 28.04.2026 Mileage: 816,000 km Transmission: Automatic Full air suspension 6x4 Tires in good condition Refrigeration/freezer unit Euro 6, 660 hp 18-pallet box body Box body from 2019–2021 (to be confirmed by owner) Partition wall Internal length: 7.42 m Internal height: 2.85 m External height: approx. 4.2 m Bull bar Sand spreader Tool box Trailer hitch VBG coupling 2 bunks Radio/CD Climate control / AC Service history Video available Ready for delivery Itodjx Ip R Ijpfx Af Sjr Description: 2022 Scania R660 6x4 box truck.The vehicle is EU approved and ready for delivery.18-pallet box with refrigeration/freezer unit, box body from 2019–2021.Possibility to purchase 3 identical trucks with approximately the same mileage. Km: 816000 HK: 659 Technical approved: Yes EU-approved until: 28.04.2026 Own weight: 13900 Total Weight: 28000 Payload: 14025 Width: 255 Length: 1021 Euro: 6 Model: 2022 Scania R660 6x4 Skapbil m/ Kjøl/frys aggregat Gearbox: Automatic

Condition: used, Used Tycon approximately 6,000 litre working capacity and 7115 litre total capacity type 808 blue glass lined receiver vessel. Unit measures approximately 2,000mm diameter x 1680mm straight side. Unit has welded dished top and bottom heads. Internal rated full vacuum/2 bar design pressure at -10/+200 degC. Unit mounted on (4) mild steel legs. Specifications: Capacity: 1,585 gal Condition Of Glass: Used Iedpfx Afex Hv R So Sstr Internal Pressure: 14.5038 psi Internal Temperature: 392°F Vertical/Horizontal: Vertical Diameter: 78.74" Straight Side: 1680

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut Itodpfxjrtrxis Af Ser * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, machine/vehicle number: YS2R6X4000218xxxx, mileage: 800,000 km, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 22064 Specifications: EU approved until 30.03.2026 Mileage: approx. 800,000 km Transmission: Automatic Full air suspension Itedpsx Ip Rujfx Af Sor 6x4 Tires in good condition Refrigeration/freezer unit Euro 6, 660 hp 18-pallet box body Box body from 2019–2021 (to be confirmed by owner) Partition wall Internal length: 7.42 m Internal height: 2.85 m External height: approx. 4.2 m Bull bar Sand spreader Tool box Trailer hitch VBG coupling 2 bunks Radio/CD Climate control / AC Service history Video available Ready for delivery Description: 2022 Scania R660 6x4 box truck.The vehicle is EU approved and ready for delivery.18-pallet box with refrigeration/freezer unit, box body from 2019–2021.Possibility to purchase 3 identical trucks with approximately the same mileage. Km: 800000 HK: 659 Technical approved: Yes EU-approved until: 30.03.2026 Own weight: 14760 Total Weight: 28000 Payload: 13165 Width: 255 Length: 1021 Euro: 6 Model: 2022 Scania R660 6x4 Skapbil m/ Kjøl/frys aggregat. Gearbox: Automatic

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Itsdpfx Aex Hv R Esf Ser Specifications: Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 108.778

Condition: used, mileage: 192,304 km, Year of construction: 2013, Serial number: VF644AGE00001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20848 Specifications: - 2013 model Itsdjwvywhjpfx Af Ssr - 192,304 km - Eu-approved until: 02.06.25 - Euro 5 engine - Automatic - 4x2 - 219 hp - Front suspension: steel - Rear suspension: air - Internal width: 2,462 m - Internal height: 2,408 m - Internal length: 6,522 m - Tires (see pictures) - Defective lift (due to hydraulic leak) - Zepro lift - Air conditioning/ac - Lights - Heated mirrors - Error codes - Ready for delivery Description: We have a 2013 4x2 Renault Midlum Box truck with a defective lift for sale. There is a defective lift on the car as it has a hydraulic leak. There is also a bad battery on the car. This may need to be replaced. There are also some error codes on the display (see pictures)  besides this, the car starts and works according to the owner. Errors and deficiencies exist and some additional costs must be expected. Ready for delivery. Km: 192304 HK: 219 Technical approved: no EU-approved until: 02.06.2025 Own weight: 5730 Total Weight: 7500 Payload: 1695 Width: 255 Length: 848 Euro: 5 Model: midlum

Condition: used, mileage: 227,000 km, Year of construction: 2016, Serial number: ZCFA775F80265xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21673 Specifications: EU-approved until 01.11.2025 2016 model Approx. 227,000 km Automatic Tires (see photos) 1,500 kg Zepro tail lift Side door Norka box body 3 seats Euro 6 Length: 810 cm Width: 255 cm Wheelbase: 418 cm Curb weight: 4,940 kg 4x2 207 hp Internal length: approx. 613 cm Internal height: approx. 235 cm Reverse camera Radio/CD Air conditioning (A/C) Description:Iveco 75-210 two-axle box truck from 2016.New brake discs, clutch parts, and a front mirror were replaced during the service. last year.Equipped with a Norka box body and a 1,500 kg Zepro lift.Can be delivered on short notice.See video for more details. Km: 227000 HK: 207 Technical approved: no EU-approved until: 01.11.2025 Own weight: 4940 Total Weight: 7500 Payload: 2485 Width: 255 Length: 810 Itodpexq U T Dofx Af Sor Euro: 6 Model: 2016 Iveco 75-210 4x2 skapbil m/ lift Gearbox: Automatic

Condition: used, machine/vehicle number: WMA18SZZ8DW18xxxx, mileage: 311,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21034 Specifications: EU-approved until 14.11.2026 Mileage: approx. 311,000 km Transmission: Automatic Engine brake Suspension: Steel front, air rear Euro 5, 400 hp Good tires Iedpfsw Hwh Ssx Af Setr Full side opening 20-pallet box body FOKOR body Zepro tail lift, 2,000 kg Internal length: approx. 8.55 m Internal width: approx. 2.49 m Internal height: approx. 2.42 m 3 seats Air horns 6x2 Radio/CD Reversing camera Climate control / AC Services performed at a local workshop Video available Ready for delivery Description: MAN TGS box truck from 2013.The truck is equipped with a 20-pallet box body and On Spot. Km: 311000 HK: 399 Technical approved: Yes EU-approved until: 14.11.2026 Own weight: 11760 Total Weight: 27000 Payload: 15165 Width: 255 Length: 1055 Euro: 5 Model: TGS 26.400 6x2 Skapbil m/ Full sideåpning. SE VIDEO Gearbox: Automatic

Condition: used, machine/vehicle number: ZCFA875F50269xxxx, mileage: 113,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21794 Specifications:• Km: 113,000• Gearbox: Automatic• Engine brake• Euro 6, 207 hp• Good tires• Norka box body• Side door• Internal length: Approx. 6 meters• Internal width: Approx. 2.47 m• Internal height: Approx. 2.34 m• 4x2• Zepro tail lift, 1500 kg• Remote control• 3 seats• Reversing camera• Radio/CD• Climate control/AC• Services performed• Video• Ready for delivery Description:Iveco 75E-210 box truck from 2020.The truck has only 113,000 km.EU-approved and ready for delivery.Some cosmetic damage, see photos. Km: 113000 HK: 207 Technical approved: Yes EU-approved until: 28.03.2026 Own weight: 4980 Total Weight: 7500 Payload: 2445 Width: 255 Length: 790 Euro: 6 Model: 75E-210 Skapbil. 113 000 km! Itsdpexwkfcsfx Af Sjr Gearbox: Automatic