Used International B414 Super for sale (10,758)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Godpfxsy D I I Re Aipsuh Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Gusdpfx Aezudu Soipoh Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left.

Year of construction: 2010, condition: used, TECHNICAL DATA Materials: • PE • PP • Extra cut • Thermo • Clear and transparent • PET • Suitable for blank materials • Suitable for pre-printed materials with registration marks Operating / Printing Modes: • Semi-rotary • Full-rotary • Center dancer Godpjz R D Ebjfx Aipeuh • Web threading mode • Printing mode • Web type selection: blank web / printed web Flexographic Printing Unit: • 1 flexographic printing station • Suitable for UV ink and varnish • Printing cylinder • Varnish cylinder • Impression roller • Anilox roller • Cartridge Electrical & Pneumatic Requirements: Electrical supply: 400 V Current: 40 A Frequency: 50 Hz Compressed air: 6 bar Air consumption: 300 l/min

Condition: used, functionality: fully functional, total length: 48,000 mm, total height: 6,464 mm, Year of construction: 2019, 2019 FONG KEE THREE-LAYER CO-EXTRUSION FLAT SHEET LINE Up to 2,100 mm net sheet width | 7,000 operating hours Direct owner sale | Can be seen running by appointment Company-owned Fong Kee sheet extrusion line, offered for sale directly by the owner. The line has been used in our own production and remains fully assembled at our facility in Torbalı, İzmir, Türkiye. Originally specified for flat sheet production for furniture applications, the line offers multiple material and layer options. A running demonstration can be arranged in advance for interested buyers. MACHINE OVERVIEW Manufacturer: FONG KEE INTERNATIONAL MACHINERY CO., LTD., Taiwan Model: TSE-90/150/150-2400 Year of manufacture: 2019 Operating hours: 7,000 h Type: Three-layer co-extrusion flat sheet line Layer configurations: A/B/A or A/B/C Processable materials: PET, PMMA, ABS, PS (HIPS / GPPS), PC and PP The material options and layer configurations listed above have been confirmed through our own production experience. PRODUCTION SPECIFICATIONS Net trimmed sheet width: 1,500–2,100 mm Die width: 2,300 mm Specified sheet thickness: PET: 0.3–0.8 mm PMMA/ABS: 0.6–0.8 mm Specified maximum output: Up to 1,000 kg/h, depending on resin and sheet thickness Specified operating speed: 3–10 m/min EXTRUSION AND MELT DELIVERY Three vented extruders: Extruder A: Ø90 mm, L/D 35:1 Extruder B: Ø150 mm, L/D 32:1 Extruder C: Ø150 mm, L/D 32:1 Three hydraulic screen changers Three MAAG melt gear pumps Dynisco melt-pressure instrumentation EDI Ultraflow I three-layer feedblock EDI Ultraflex HRC 100 Fastgap die, 2,300 mm CALENDER AND SURFACE FINISHES Horizontal three-roll mirror-polishing stack Roll diameters: 400 / 600 / 600 mm Roll face width: 2,400 mm Mirror-finished, hard-chrome-plated rolls Multi-zone roll temperature control Additional dedicated matte calender roll included In our own production, we have achieved both high-gloss / mirror optical-grade surfaces and anti-glare / matte finishes on this line. DOWNSTREAM EQUIPMENT Dual-sided protective masking film application unit Haul-off unit Automatic guillotine cutting unit Conveyor unit Automatic vacuum stacking unit Two-drum turret winder with automatic tension control ELECTRICAL AND AUTOMATION Siemens SIMATIC ET 200SP PLC Siemens 19-inch and 12-inch Comfort HMI touchscreens Siemens SINAMICS G120 drives Schneider Electric main electrical switchgear Air-conditioned electrical cabinets INSTALLATION AND CONDITION Location: Torbalı, İzmir, Türkiye Overall line length: Approximately 48 metres Condition: Excellent used condition, fully assembled and preserved indoors Current status: Currently idle; can be demonstrated running by prior arrangement Reason for sale: Production facility reconfiguration Gsdpfxjzzdnfs Aipjuh Please refer to the technical layout drawing for the detailed equipment arrangement, installation dimensions and utility information. INSPECTION AND COMMERCIAL TERMS The complete line is available for on-site inspection and can be seen running by prior arrangement. Delivery terms: EXW Torbalı, İzmir, Türkiye. Reasonable offers will be considered, taking into account the overall commercial terms of the transaction. Detailed technical specifications, the line layout drawing, photographs and an operating video are available for review.

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Gujdpjz Hw D Uefx Aipoh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P.0020001424, X-Ray Yxlon international MU231 - fully functional (2003) Fully automatic, 100% x-ray inspection of alloy wheels using YXLON's Y.AI/Rel.9 ADR program reaches a cycle time below 25 seconds per wheel. The automatic defect. Fully functional X-Ray for alu wheels. Possible alu wheels from size 12 to 19. Machine is fully working, perfect condition. During 2025 full repas was done - all issues are now sorted (tested). Guodpfx Aiox Hqnropsh Software is unlocked. New owner can test the machine before purchase (Central Bohemia). Machine label attached. Price: 49.000 EUR excl. VAT (price does not include transport and duties) Invoice will be issued in EUR from Czech company. When you will have any questions, do not hesitate to contact us - e-mail / WhatsApp / call Lead cabin (1) with shuttles (2) for the transport of wheels in/out the cabin Decollators to get single wheels for transportation in the cabin X-ray tube (3), Image Intensifier (4), High-voltage generator, X-ray control unit (5) Industrial PC (6) (with mechanical positions and X-ray parameters for every wheel type) Control cabinet with PLC (7) Wheel manipulator (8) (Rotation and linear movement of wheels) X-ray-manipulator (9) (tilt axis with X-ray tube and Image intensifier) Vision System for wheel type recognition Image-Processing Unit (Host PC with Slave PCs) Output conveyor (10) e.g. with an alterable switch (for accepted wheels / rejects)

Condition: reconditioned (used), functionality: fully functional, pressure: 180 bar, input voltage: 400 V, overall weight: 130 kg, temperature: 155 °C, Kärcher HDS Super M Eco Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 90/155 Connected load [kW]: 6.4 Detergent tank [l]: 20 Gujdpjz Nv R Hjfx Aipjh Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Guodpjzz Sidsfx Aipeh Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: reconditioned (used), functionality: fully functional, pressure: 180 bar, input voltage: 400 V, overall weight: 130 kg, temperature: 155 °C, Kärcher HDS Super M Eco Hot Water Pressure Washer New Pump Head The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head featuring new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique, actual photos; you are buying the exact machine shown. Technical Data: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Gusdpfx Aoz D D Axjipjh Operating pressure [bar]: 180 Max. Heating temp. [°C]: 90/155 Connected load [kW]: 6.4 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW pump head NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new FoodMAC International Ltd BULLDOG 6000/600 Electric Fryer for frying cut potatoes and similar products, year of construction 2023. Model: FRE 6000/600 Voltage: 400 V Power: 200 kW Year of manufacture: 2023 Guodpfxezgt D Hs Aipjh Weight: 1980 kg Machine number: 3035 Capacity: 1500 kg/h If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2113/21, type of input current: three-phase, input voltage: 400 V, total height: 2,200 mm, total width: 1,500 mm, total length: 2,000 mm, nominal power (apparent): 100 kVA, electrical fuse: 250 A, working range: 40 mm, welding power (max.): 100 kVA, overall weight: 2,500 kg, A new, unused butt-welding machine. Originally acquired for butt-welding 40 mm rebar, it was never put into service because the project was cancelled. The machine is currently fitted with 40 mm round jaws, but custom jaws of any required shape can easily be manufactured for it. In addition to rebar, the machine can be used to fabricate joints for heavy machinery or anchor bolts for reinforcement work. Suitable for the butt welding of all types of steel grades up to 1,500 mm². Guodpfx Aijz Ehvljpjh

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Guodjr A D S Eopfx Aipjh Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 16-head rotary filling machine Godpfx Aezlhy Hsipouh with 2 checkweighers year: 2020

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ASS.NO.330165301, turning length: 1,017 mm, turning diameter: 420 mm, total height: 2,840 mm, total length: 5,500 mm, total width: 2,800 mm, overall weight: 7,400 kg, bar passage: 70 mm, number of driven tool stations in tool turret 1: 12, MAZAK SUPER QUICK TURN 300 M CNC lathe Note: Technical data is provided without guarantee. - Swing diameter: approx. 620 mm - Max. turning diameter: approx. 420 mm - Max. turning length: up to approx. 1017 mm - Bar capacity: presumably 70 mm - Diameter of the three-jaw chuck: 250 mm - Number of powered tool stations: 12 - Includes technical documentation - Includes machine accessories such as tool holders, some powered, chuck jaws, and other accessories Transport will be carried out on a standard truck. FCA D-01445 Radebeul - loaded onto truck. Godoz Nwapspfx Aipeuh

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Gujdpfxed Tidxs Aipoh Lateral collection plates in the infeed section Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3, manual adjustment up/down, left/right - spindle 2, manual adjustment left/right - spindle 2, electric adjustment up/down - spindles 2 and 3 are equipped with brakes from above: - 3 feed rollers, pulling, metal toothed - 1 double output roller, pulling, rubber from below: - feed pressure roller - ribbed table - pulling roller, metal, smooth - electric adjustment of planing thickness - stepless adjustment of feed speed 6-24m/min - feed motor 3kW - feed on Cardan shafts - length of the feed table 1970mm - automatic lubrication system for the table - diameter of the dust extraction outlet 1x150mm, 2x140mm - dimensions L/W/H 3070x2000x1800mm - weight 2000kg ADVANTAGES Gusdpfx Ajzxq I Heipsh – German production – with 3 heads – for processing slats – ribbed table – heads included – unpainted – very good condition – used planer Net price: 115900 PLN Net price: 26960 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH > Siemens 808D control > Siemens motors > Linear guides > 6'' hydraulic universal with 3 jaws Gjdpfevwbvpex Aipsuh > 6-station electric turret

Condition: new, Year of construction: 2018, functionality: fully functional, power: 25 kW (33.99 HP), New in box specialized food waste shredder. Manufactured in 2018 but has never been used, still in box. Guodpfx Aijwq Rapspjh

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE 170 MM HYD 3 JAW CHUCK Gsdpfxsz Rnwbj Aipeuh MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL TOOL SETTER PARTS CATCHER BARFEED

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material Godpjwgc I Refx Aipouh • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Godow H Naajpfx Aipeuh Including pallet with tools and spare parts

Condition: used, Year of construction: 1963, overall weight: 1,050 kg, type of input current: three-phase, input voltage: 380 V, power: 2.8 kW (3.81 HP), input frequency: 50 Hz, input current: 7 A, CYLINDRICAL GRINDING MACHINE VEB BWF BERLIN SI 40x70 Model: SI 40X70 Gusdpfx Aezl Sn Ueipsh Serial number: 1436 Year of manufacture: 1963 Total weight: 1.05 t Circuit arrangement: SI40-60.0 Sp Wiring diagram: SI40-60.0 Lp Type of current: 3-phase AC Frequency: 50 Hz Operating voltage: 380 V Distribution voltage: 220 V Connected power: 2.8 kW Machine rated current: 7 A Rated current (fast): 25 A Permissible protection (slow): 20 A If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, For sale: a robust Dresser International M 10 A rough-terrain forklift from 1983. This powerful machine is equipped with a reliable International 6-cylinder diesel engine and has a recorded operating time of 4741 hours. With an impressive capacity of 10,000 lbs (approximately 4536 kg), this forklift is ideal for heavy-duty tasks on challenging terrain. The forklift features hydraulic fork adjustment and side shift for optimal flexibility and precision. The fork length is 1780 mm. The tire size is 20.5-25, and the machine is equipped with a cabin for comfortable operation. The overall dimensions are L: 9000 mm, W: 2550 mm, H: 3250 mm. Please note: the VIN number cannot be read. Gujdpoz D Auyjfx Aipsh

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Godpfx Aiowty Etopjuh

Condition: excellent (used), IM Very good condition. Gujdpfxsw Ebwuj Aipsh