Used Glass burners for sale (23)

Condition: excellent (used), Year of construction: 2021, Operating hours: 1,200 h, Functionality: fully functional, 3600*2400 is the largest glass size. Bf98Nngka

Condition: used, Year of construction: 2001, Functionality: fully functional, MAPPI Type : AU 1F 1S glass 2200 x 3800 mm Construction Year: 2001 / KW 423 400 V 50 HZ Bldwf7Xjwla 4 - 19 mm, Left > Right Without convection (no Low-E) Without convection (no Low-E) GMR Stock Place: GMR MM 1

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Total width: 2,440 mm, Total length: 4,200 mm, Total height: 1,996 mm, Temperature: 700 °C, Type of input current: AC, Outer dimension length: 20,000 mm, Energy consumption: 980 kWh, Input current: 380 A, Outer dimension width: 3,800 mm, Power: 980 kW (1,332.43 HP), Workpiece height (max.): 19 mm, Chambers: 1, Cuptor de securizare ,în stare bună de folosință Cuptorul se va vinde fără motoare Upg8G2U9W2

Condition: good (used), Year of construction: 2002, ESG: 6 - 19 mm, TVG: 4 - 12 mm, Bj77Se0Ufjs Size that can be covered: 2800 x 6000 mm, Power: Heating: 1060 kW, Motors: 235 kW, Total power: 1295 kW.

Condition: used, Year of construction: 2007, 2 (two) chambers Max. size: 2580 X 4200mm Min. size: 100 X 200 mm Thicknes: 4-19mm LowE Q8Rkh The line is currently dismantled and stored in our warehouse as shown on the pictures.

Year of construction: 1997, Condition: good (used), Functionality: fully functional, For tempering glass sheets TECHNICAL DETAILS pane size: min. 100 x 280 mm wheel size: max. 4200 x 2250 mm slice thickness: 3 - 19 mm Glass quality (building): DIN 1249-12 Csukawkzs8 Glass quality (vehicles): ECE R43 Loading capacity: 9,5 sqm Ventilation: 2 x fans for pre-charging + 1 x after-cooling fan MACHINE DETAILS power: 1936 kW supply voltage: 3 phases, 400 V, 50 Hz Weight: 54,2 t EQUIPMENT all documents from the instruction manual to the electrical circuit diagrams

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Machine/vehicle number: HTF-1430-CTA-10-R, Type: TAMGLASS HTF-1430-CTA-10-R Build year: 2002 Work load: 5-6 years in one shift, 9-10 years in one shift/periodically, 2020-2022 two shift. Condition: excellent - under yearly Glaston service Production range: 4-19 mm Max. glass size (float): 1400 x 3000 mm Blark0B03Q Top convection system (for hard coated Low-E glasses, >0,1) Axial ventillator (radical energy saving on thick glasses above 8 mm thickness) Installed electrical power: approx. 500 kW (285 Heating, 12 kW axial ventillator, 2 x 90 kW radial ventillators + other motors)

Condition: used, Year of construction: 2005, Functionality: fully functional, Heat soak test (EN 14 179/01 and 02) Inspection & test equipment Safe ESG glazing with the heat-soak test furnace! Electrically heated Various furnace sizes Various loading and unloading systems Coordinated heating and fan output Optimized temperature control and temperature gradient specification, different charging systems different variants of the distancing technology 3Ddtu2Tw Tamper-proof paperless recorder with industrial USB interface EDP interface and order assignment user-friendly, clear display with energy consumption indicator suitability of the oven for the production of autoclave-free laminated safety glass (optional) max glass 4200*2500 mm volume 21 m³ transport length of the unit is 5500 mm. H body 3210 mm W 2500 mm

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Machine/vehicle number: 261326-1001-30, Power: 353 kW (479.95 HP), Type of input current: three-phase, Workpiece weight (max.): 5,000 kg, Equipment: Type Plate Available, 2 blowers for a hardening furnace, cooling and high-pressure blowers dismantled from running operation For industrial applications Kig0Gsue

Condition: good (used), horizontal single-chamber glass tempering system suitable for coatet glass assignable area: max. 2400 x 4200 mm KW: 814,5 Dimensions: length = 22 m, width = 7 m Cgqrxmbqhu

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type G.11.01 Iqg83Hr Glasbeek finish Gas chamber furnace Type G.11.01 With loading trolley Maximum temperature 200 ° C BJ. 1991 3 x 380V 54 kW Approximate inside dimensions (B1900mm x T2940mm x H1965mm) More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2022, Functionality: fully functional, The glass cutting line includes an automatic loading table, a cutting table and a breaking table, and a control system. According to customer requirements, multi-station loading stations and glass storage system can be applied to our cutting line. The machine is capable of cutting shapes, circles, rectangles, squares and strips. Once the cutting information schedule is entered or imported from the customer's optimization software, the slicer will transmit the input glass requirements and rack location to the loading system in a sequential, overlapping order to keep the system running consistently. The glass is automatically fed into the slicer, cut and transferred to the breaking table. Loading table: The system consists of a roller conveyor and vacuum frames. The entire conveyor table is equipped with rollers. Each vacuum frame has individual arms that are nested between the conveyor rollers and tilt to pick up glass from the racks. The tilting motion is accomplished by an electric motor/gearbox drive system. Each individual arm is equipped with 4 adjustable frame suction cups. Cutting table: Features of the cutting unit - Durable construction - Aluminum alloy bridge - Integrated head - Automatic glass detection before cutting - 360° rotation of the cutting head - Automatic proportional pneumatic cutting pressure control - Independent control valve of oil module Gok3C8

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Total width: 4,400 mm, Total length: 18,000 mm, Total height: 6,450 mm, Dismantled and ready for loading! Machine Parameters: Max loading width 2000 mm Max loading length 3660 mm Maximum glass loading size 2000 x 3660 mm (at 5 - 19 mm) and 2000 x 1700 mm (at 4 mm only) Minimum glass loading size 100 x 300 mm Glass thickness range EN 12150 1:2000 (FT) 4 - 19 mm Glass thickness range EN 1863 1:2000 (HS) 4 - 8 mm Loading height 930 mm Furnace roller diameter 75 mm Pitch furnace rollers 120 mm Chjttmk0Ou Number of ceramic rollers 44 pcs Number of heating zones top half 40 pcs Number of heating zones bottom half 25 pcs Number of drive motor for convection support 4 pcs Lifting height top furnace half 460 mm Heat up time (20 ºC to 700 ºC) 12 hr (discontinuously) / 6 hr (continuously) Warm up time (550 ºC to 680 ºC) 1 hr Glass exit temperature ≤ 30 ºC + environment temperature Yield (at diamondtool worked edges) 92 % at 4 mm / 95 % at 5 19 mm Productivity (at clear float glass of 60 % - 70 % loading rate 4 mm = 32 batches / hr 5 mm = 15 batches / hr 6 mm = 13 batches / hr 8 mm = 10 batches / hr 10 mm = 7 batches / hr 12 mm = 6 batches / hr 15 mm = 5 batches / hr 19 mm = 3 batches / hr Compressed air supply 0.6- 0.8 m³ / minute (7 bar) Electric supply network furnace 3 x PH + N + PE 400 V +/ 10 %, 50 Hz Fan Drives 3 x PH + N + PE 400 V +/ 10 %, 50 Hz Installed / required power in kW / KVA Furnace heating 576 kW Convection 11 kW ( 4 x 5,5kW) Auxiliary Drives 20 kW Quenching Section 250 kW Total installed power 857 kW x 80% ≈ 700 kW

Condition: ready for operation (used), Year of construction: 2004, A horizontal, continuous, electric tempering furnace complete with pre-stressing cooler and post-cooling section is available. Total oven length: 19.44m, useful load width: 1250mm, length of tempering station: 15.12m, length of post-cooling station: 4m. Length of loading table: 4m, length of unloading table: 4m, total length of tempering system: 47.19m, including robot: 52m, total width without sound insulation: approx. 6.00m. Glass thickness range: 2.8mm to 10mm, max. glass size: 1250mm/2200mm, min. glass size: 100mm/250mm. Documentation available. Cm8Bz0Dtse

Year of construction: 2002, Condition: excellent (used), Tamglass/Glaston Glass tempering furnace ESG Ofen / Glashärtungsanlage / Piec do hartowania szkła HTF ProE - 2860-CTS-20L 2800 x 6000 mm, 4 – 19 mm, Left ᐳ Right Year / Baujahr / Rok budowy: 2002 Modification / Modifikation / Modyfikacja: 2011 Heating coils in the lower furnace renewed / Heizwendeln im Unterofen erneuert / Wymiana spirali grzewczych w dolnym piecu: 08/2019 In very good condition In sehr gutem technischen Zustand | W bardzo dobrym stanie technicznym Glasplattendicke / Thickness / Grubość szkła: 4 – 19 mm Glasmasse / Glass dimensions / Wymiary szyb – max.: 2800 x 6000 mm Leistung / Power / Moc: ~ 1500 kW Low-E 1.0 ab / from / od 4 mm With convection (bottom + top) / Mit Konvektion (unten und oben) / Z konwekcją górną i dolną In sehr gutem technischen Zustand | W bardzo dobrym stanie technicznym Inspection during production is possible by appointment. Bffkpehilb Besichtigung während der Produktion ist nach Terminvereinbarung möglich. Oględziny podczas produkcji są możliwe po ustaleniu terminu. Glasplattendicke / Thickness / Grubość szkła: 4 – 19 mm Glasmasse / Glass dimensions / Wymiary szyb – max.: 2800 x 6000 mm Leistung / Power / Moc: ~ 1500 kW Low-E 1.0 ab / from / od 4 mm With convection (bottom + top) / Mit Konvektion (unten und oben) / Z konwekcją górną i dolną Do you need servicemen to relocate (disassemble / assemble) machines? Contact us. Kontaktieren Sie uns bitte, wenn Sie unsere Servicetechnikern für die De-/Montagen brauchen. Potrzebujesz serwisantów do przeniesienia (demontaż / montaż) maszyn? Skontaktuj się z nami. OVER 30 YEARS SERVING THE GLASS INDUSTRY

Year of construction: 2017, Condition: excellent (used), Max. glass size: 3210 x 6000 mm Min. glass size: 200 x 400 mm Chvg9Hvo Glass thickness: 4 - 19 mm Start-Up: 2018

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Bfl2Jndj9X More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2008, Condition: excellent (used), NorthGlass 4 – 19 mm, 2000 x 3600 mm, Left – Right Glass tempering furnace Year: 2008 Iux7Kqkrq Connection value: 700 kW With upper convection In very good working condition. Annual technical inspections were performed each year. The furnace was dismantled in December 2023 and is in storage in Germany.

Condition: excellent (used), Year of construction: 2011, Available immediately. Available production sizes and materials: Width min: 200 mm; Width max: 2400 mm; Length min: 500 mm; Length max: 4800 mm; Glass thicknesses ESG: 4 to 12 mm; Glass types ESG: Float, Low-E (4-8 mm), Ornaments; Glass thicknesses TVG: 5 to 10 mm; Glass types TVG: Float; Diagonal: min. 500 mm. Dimensions: Maximum dimension 4 mm float: 1500 x 2500 mm; 2Nwenlwq Maximum dimension 5 mm float: 2000 x 3000 mm; Maximum dimension 6 mm float: 2400 x 4000 mm; Maximum dimension 4 mm Low-E: 1100 x 2000 mm; Maximum dimension 5 mm Low-E: 1500 x 2500 mm; Maximum dimension 4 mm Low-E: 2000 x 4000 mm; Max. length/aspect ratio: 10 to 1

Condition: excellent (used), Glasbeek finish   Gas Poederwand chamber oven  Maximum temperature 250°C Electrical connection 8 kW 51 KW 3x400V No2Jf Year 2003 Approx. internal dimensions W120cm x D300cm x H139cm with loading trolley (L280 x W102 cm) Approx. external dimensions LxWxH approx. 380x220x305 cm

Year of construction: 2003, Condition: good (used), TAMGLASS / GLASTON – Finland Chuv2C2Ic7 ProConvection-2130-C-20-L, HTF3 3,8 – 19 mm, 2100 x 3000 mm, L – R Glass tempering furnace Year: 2003 With convection (Low-E glass) Noise reduction cabin included In good condition. Dismantled and stored in warehouse.

Condition: good (used), Glasbeek Finish Gas Chamber Furnace G.11.01 200 ° C 54kW Glasbeek finish Gas chamber furnace Maximum temperature 200 ° C Electrical connection 4 kW 54 KW 3x380V Bforloe9Uq Approximate inside dimensions (B1900mm x T3000mm x H1880mm) More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 1992, Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bfmljwyrbo Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW More articles - new and used - can be found in our shop! International shipping costs on request!