Used International B414 for sale (9,663)

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Iodsz I Uwnjpfx Apietn

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Iedpfx Apsz I Uv Doiotn

Condition: like new (used), Year of construction: 2016, operating hours: 9,300 h, machine/vehicle number: IntNr231649, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2016, with only approximately 9,300 operating hours. Technical Data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine Type: CNC Swiss-type automatic lathe Year of Manufacture: 2016 Control System: FANUC 31i-B Number of CNC Axes: 8 Number of Spindles: 2 Operating Hours: approx. 9,300 h Condition: very good Main Spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 rpm Spindle drive power: approx. 4 kW C-axis Counter-Spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 rpm Drive power: approx. 4 kW C-axis resolution: 0.001° Tool Carrier 1 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Tool Carrier 2 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Front machining Up to 4 tool positions Rear/Opposite-side machining Up to 8 tool positions Of which, up to 4 are driven positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Itjdpfx Ajz Er A Njpion Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected under power by prior appointment. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Internal grinder VOUMARD 203 C21 MINI Itjdpjz I Uvdofx Apijn

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Itodpfx Asz I Uvwspion

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Ijdpfxez I Uwbj Apistn

Condition: used, Internal grinder JUNG Iedpfxjz I Uu Ts Apiotn

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Itjdpfsz I Uv Rsx Apion

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Itodpfx Apjz I Uvqeien

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231674, A high-quality, 3-axis precision machining center, the MIKRON MILL P 900 from GF Machining Solutions, built in 2017, is for sale. TECHNICAL DATA General Data Manufacturer: MIKRON / GF Machining Solutions Model: MILL P 900 Machine type: Vertical 3-axis precision machining center Year of manufacture: 2017 Number of axes: 3 Spindle operating hours: approx. 1,530 hours CNC control: FANUC 31i-B TECHNICAL DATA Travel X: 900 mm Travel Y: 600 mm Travel Z: 450 mm Isdpfoz Ipnnex Apistn Rapid traverse X/Y/Z: 30 m/min Clamping area: approx. 1,000 × 600 mm Max. table load: 1,000 kg Max. spindle speed: 20,000 rpm Tool holder: HSK-A63 Spindle power: up to approx. 36 kW Torque: up to approx. 120 Nm Tool changer: 30-position Tool holder: HSK-A63 Machine concept: 3-axis gantry machining center The machine can be inspected on site by appointment. Subject to change, errors and prior sale!

Condition: used, Internal grinder VOUMARD 3ASCE Itjdpfoz I Uwujx Apien

Condition: used, Internal grinder VOUMARD Isdpfxjz I Uwzo Apistn

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231682, For sale is a Büchele / SF-Systeme SFB-301 eco high-pressure system with a 150 bar operating pressure, replaceable filter system, additional 10 µm fine filter, 8 valves, and a 200-liter tank capacity, manufactured in 2012. Technical data Manufacturer: SF-Systeme Büchele Model: SFB-301 eco Year of manufacture: 2012 Max. operating pressure: 150 bar Itodpfxoz Ir Ido Apion Flow rate at 150 bar: approx. 24 l/min Tank capacity: approx. 200 liters Main filter system: replaceable filter Filter fineness of main filter: approx. 40 µm Additional filter / fine filter: 10 µm Valve configuration: 8 valves Number of coolant outlets: up to 8 separately controllable circuits, depending on machine integration Overall dimensions L × W × H: approx. 1,475 × 700 × 730 mm Medium: cooling lubricant / KSS Technical documentation available. The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Itsdpou Ti Tvjfx Apijn Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Internal grinding machine | Brand: VOUMARD | Type: 5A LP 1000 Year of manufacture: 1991 Range of parts: Gear wheels, guide rollers, centring bushings. The machine can be inspected under power by appointment. Condition: In working order, ready for use. TECHNICAL SPECIFICATIONS: Working area - Internal grinding diameter: 5 mm - Internal grinding diameter max.: 200 mm Iedpfx Apozzcmyeijtn - Max. Grinding depth: 250 mm - Peak height: 180 mm - Peak distance: 1.000 mm Working spindle - Spindle bore: Ø 80 mm - Swivelling capability: 0° Sliding spindle carriage - Minimum and maximum swivel range: 25 degree - Minimum longitudinal movement: 3 mm - Maximum longitudinal movement: 600 mm - Table speed, continuously adjustable: 0 - 10 m/min - Workpiece weight: 0,25 tons Grinding wheel / disc - Diameter max.: Ø 60 mm - Width max.: 25 mm - Borehole: Ø 12 mm - Rotational speed: 3.600 - 40.000 rpm - Operating voltage: 380 V, 50 Hz - Control voltage: 24 V - Total power requirement: 8,7 kW - Machine weight approx.: 2,7 tons Dimensions: - Machine (L x W x H): 2,9 x 1,2 x 1,9 m - Water tank (L x W x H): 1,4 x 0,8 x 0,65 m - Motor (L x W x H): 0,8 x 0,4 x 0,65 m ACCESSORIES: - 4-jaw chuck, Ø 250 mm - 1 steady rest and various spindles No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Model: 95 L IM Intensive mixing of various rubbers Itedjy E I Awspfx Apien Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Active cycle time: Continuous Discharge door: Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t The main control panel: approx. 1.5t

Condition: used, Year of construction: 1952, 220 mm Isdsyn R Nwepfx Apietn ja weight of the machine ca. 1,4 t

Condition: used, External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Itodpez I A Dcjfx Apijn Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Itedpfx Ajz I Az Uspijn Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Itsdpfx Aoyg Nvtepion

Condition: good (used), Year of construction: 1974, internal diameter 25 - 300 mm grinding depth 250 mm swing diameter 50 mm Itjdpfjzbc I Sjx Apion centre height 300 mm internal grinding diameter 25 - 300 mm spindle bore 70 mm spindle speeds 45 - 450 mm inclination 30 ° table movement in milling step automatic 600 mm/min table speed - backwards 0 - 10 m/min spindle turning speed range 3000 - 18000 U/min spindle diameter 120 mm total power requirement 12 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,0 x 1,9 x 1,8 m

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Ijdpfx Apsz E Rbdjietn Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: good (used), Year of construction: 2004, machine/vehicle number: 3234, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. Iodjzluyaepfx Apiotn All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Swing over bridge: 500mm Swing over table: 800mm Isdpfjzqnlgox Apiotn Table travel: 1300mm Grinding depth: 800mm

Condition: used, Year of construction: 1971, grinding depth: 150 mm, grinding diameter: 80 mm, inner diameter: 80 mm, Manufacturer: OVERBECK Model: 250 I Year of construction: 1971 Workpiece clamping diameter: max. 140 mm Clamping length: max. 150 mm Grindable bore length: 150 mm Bore diameter: max. 80 mm Surface grinding device can be swiveled in by hand Coolant tank with pump without grinding spindle and drive motor was last operated with compressed air spindle Weight: approx. 1400 kg Itodju Ef Dqepfx Apijn