Lead and feed screw lathe TUD 50

Condition: excellent (used), Year of construction: 2023, operating hours: 533 h, functionality: fully functional, machine/vehicle number: 20230605, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 10,000 rpm, The machine was fully overhauled by the manufacturer at the end of 2025 (invoice attached). Documentation of completed work and replaced parts is available. The machine has only 533 spindle hours! The original price of the machine was EUR 222,000! TECHNICAL DETAILS Travel X-axis: 1,060 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Spindle speed: 10,000 rpm Spindle taper: ISO 40 MACHINE DETAILS Control: Heidenhain TNC 640 Coolant supply: 20 bar Rated power: 30 kVA Full-load current: 52 A Max. current load: 250 A Short circuit withstand: 25 kA Input voltage: 400 V Type of input current: Three-phase current Total weight: 7,800 kg Operating hours Spindle hours: 533 h Machine ON hours: 2,410 h Control ON hours: 2,436 h Rjdpfx Asyma Rusf Tsbw EQUIPMENT Documentation/manual Chip conveyor

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Rsdpeu Ix Dcofx Af Tebw Flansch Spitzen div. Zahnräder *

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Corner rounding unit Tools included Redpfx Afsyuylue Tjbw 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 3005, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 1,870 mm, table length: 3,756 mm, table width: 1,892 mm, Equipment: CE marking, TECHNICAL DETAILS Working area X-axis: 3,700 mm Working area Y-axis: 1,870 mm Table length: 3,756 mm Table width: 1,892 mm Tool clamping system: HSK-F63 Number of tool changer positions: 18 pcs. MACHINE DETAILS Drilling head: F20R Number of drilling spindles: 8 vertical, 12 horizontal Rbodpfsyuyf Uox Af Tsw System/Software: SCM Maestro Dimensions & Weight Dimensions (L x W x H): 6,100 mm x 2,600 mm x 2,450 mm Machine weight: 4,160 kg EQUIPMENT Worktable with 2 vacuum zones User manual FAST18 18-position tool changer (18/22XX) Electrical schematics CE marking CE certificate Drilling tools Bumper Vacuum pump (250/300 M3/H 50/60 Hz) OF0438 MAESTRO ACTIVE HUMAN-MACHINE INTERFACE SOFTWARE (HMI) OF0429 SCM DIGITAL SOLUTIONS: MAESTRO CONNECT 52.52.20 MAESTRO CONNECT; complete hardware preset for IoT platform 52.52.25 MAESTRO CONNECT; annual membership (validity unclear) OF0422 MAESTRO CNC programming software

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T Rbsdpoxpuf Rjfx Af Tsw

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, power: 16.2 kW (22.03 HP), input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, overall weight: 2,200 kg, TECHNICAL DETAILS Number of machining units: 10 1st unit: Pre-milling unit Tools included Rodpsyuyfzsfx Af Tobw 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough trimming unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Fine trimming unit Tools included 8th unit: Corner rounding unit Tools included 9th unit: Radius scraper unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Power: 16.2 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,415 x 1,670 mm Machine weight: 2,200 kg EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Rsdpfx Ajyuya Eof Tobw Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm MACHINE DETAILS Number of transport packages: 8 pcs. Year of manufacture: 2016

Condition: new, Distance between centers 1500 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Rsdpfx Aoygxb Eef Tjbw Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Redpfx Afoyux Rij Tjbw Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 250 mm, number of spindles: 16, TECHNICAL DETAILS Working area X-axis: 3,300 mm Working area Y-axis: 1,280 mm Working area Z-axis: 250 mm Travel X-axis: 4,000 mm Travel Y-axis: 1,670 mm Travel Z-axis: 500 mm Redpfjyux I Uex Af Tjbw Number of horizontal drilling spindles: 4 pcs. Number of vertical drilling spindles: 12 pcs. MACHINE DETAILS Voltage: 400 V Current consumption: 40 A Power: 18 kW Number of transport packages: 2 EQUIPMENT Documentation CE marking HSK-F63 tool clamping system Drilling tool Saw unit

Condition: ready for operation (used), A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible. Rbedpjyarqgefx Af Tow

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Rbsdpfxjyux Ego Af Tsw Power: 11 kW Line voltage: 400 V Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106015, saw blade diameter: 520 mm, overall weight: 500 kg, tilt adjustment saw blade: 45 °, cutting depth: 600 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rodpjyuxuzofx Af Tjbw Saw blade diameter: 520 mm Maximum cutting depth: 600 mm Saw blade tilt max.: 45° (electrically adjustable) MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 6,200 x 3,200 x 2,300 mm Machine weight: 500 kg

Condition: good (used), Year of construction: 2019, operating hours: 328 h, lifting height: 5,800 mm, Drive: Wheel Empty weight: 1.551 kg Working height: 780 cm CE mark: yes Technical condition: good Rsdpfxsxfptus Af Tebw Visual appearance: good Please contact Bas Sindorf for more information

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13350686, pressing force: 400 t, stroke length: 150 mm, power: 7.5 kW (10.20 HP), number of cylinders: 10, cylinder diameter: 120 mm, TECHNICAL DETAILS Pressing force: 400 t Maximum pressing dimensions: 1,500 x 4,400 mm Maximum stroke: 150 mm Number of cylinders: 10 Cylinder diameter: 120 mm Rbjdpfx Aoyuxh Uof Tjw Plate material: Aluminium (solid) Plate thickness top and bottom: 90 mm MACHINE DETAILS Power: 7.5 kW Voltage: 380 V Dimensions & Weight Transport dimensions (L x W x H): 13,000 x 2,400 x 2,400 mm Total weight: 25,000 kg EQUIPMENT Infeed and outfeed conveyor Oil heated Oil boiler