Barloader

LNS TRYTON 112

Condition: used, Cutter Itsdpottwbgsfx Af Ssr Manufacturer: Alpina Made of stainless steel Volume: 200 liters

Condition: used, TECHNICAL DETAILS Iedju Hackepfx Af Setr - Max. bar length : 3200 [mm] - Pusher diameter : 12 [mm]

Condition: good (used), functionality: fully functional, machine/vehicle number: Nr.72.092.010, spindle bore: 12 mm, Iemca CS112 No.72.092.010 Iemca Bar feeders and motor Round barsØ 1 - 12.7 mm (3/64" - 1/2") Itedpfxern I Dfj Af Sor With set of guides for 4 mm and 12 mm and with 2 motors for Tornos M4 For 3 m bars Hexagonal barsØ 1.3 - 11 mm (3/64" - 7/16") Capacity 28 bars Ø 7.5 mm - 16 bars Ø 12.7 mm Min. time bar change 26 sec. (with 3200 mm bars) (mod.32) Feed speed 1000 mm/sec. Return speed 1600 mm/sec. Supply voltage 230/400 volts Installed power 1.8 KW

Condition: used, TECHNICAL DETAILS Itedeuhbl Hjpfx Af Sor - Bar diameter : 12 maxi [mm] - Bar length : 3200 [mm] - Pushcart diameter : 10.2 [mm] - Channel diameter : 12 [mm] - Supply voltage : 400 [V] - Machine weight : 600 [kg]

Condition: used, TECHNICAL DETAILS - bar diameter : 0,8 - 18 [mm] - bar length : 3200 [mm] Iedpfx Aouhbifof Setr - stroller diameter : 15 [mm] - channel diameter : 18 [mm] - necessary power : 1,5 [kw] - loading time : approx. 22 sec (with bar of 3200 mm) - oil filling : 50 [l] - viscosity 100 [cSt] at : 40 [°C] - weight : 500 [kg] - max. remnant length : 300 [mm]

Condition: used, TECHNICAL DETAILS - bar diameter : 0,8 - 18 [mm] - bar length : 3200 [mm] Iodpfxsuhbh Uj Af Sjtr - stroller diameter : 15 [mm] - channel diameter : 18 [mm] - necessary power : 1,5 [kw] - loading time : approx. 22 sec (with bar of 3200 mm) - oil filling : 50 [l] - viscosity 100 [cSt] at : 40 [°C] - weight : 500 [kg] - max. remnant length : 300 [mm]

Year of construction: 2005, condition: ready for operation (used), Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible. Itodpfx Asxl Upnjf Ser

Condition: ready for operation (used), bar length: 3,200 mm, LNS SPRINT new control panel Ijdpfx Ajw Rcukef Setr

Condition: used, TECHNICAL DETAILS - pressure : 4 [t] - number of supports : 2 - fixed table dimensions : 210 x 210 [mm] - fixed press assembly - hole Ø in table : 80 [mm] - number of strokes in sharpening / cutting : 50 - 150 [c/min] - adjustable slide : 40 [mm] - fixed travel : 27 [mm] - max. height for tooling : 148 [mm] - longitudinal clearance between supports : 230 [mm] - max. part diameter in sharpening : 30 [mm] Itsdpfx Afouhahmj Ser - max. part thickness in sharpening / cutting : 1.5 / 2 [mm] - voltage : 380 [V] - installed power : 1.5 [kW] - floor space : 1100 x 1100 x 1650 [mm] - weight : 500 [kg]