Bar feeder LNS

LNS

Condition: excellent (used), Year of construction: 2011, LNS Tryton 112 barfeeder Year of manufacture: 2011 Made in Switzerland Fsdpjz H I Iwjfx Ahdspn

Condition: used, Cutter Manufacturer: Alpina Made of stainless steel Volume: 200 liters Fsdettwbgspfx Ahdspn

Condition: used, Year of construction: 2008, machine/vehicle number: IntNr231684, A proven bar feeder magazine LNS, model Hydrobar Sprint 552, is for sale. Manufacturer: LNS (Switzerland) Model: Hydrobar Sprint 552 Year of construction: 2008 Working range (diameter): Ø 5 mm to Ø 52 mm Guiding principle: Hydrobaric / hydrostatic bar guidance Feed drive: Servo drive Magazine system: Bar magazine with automatic bar following Application area: CNC lathes / automatic bar machines Design: Automatic bar loader / short and long material feed Bar length: approx. 3,200 Loading: Chain magazine Fsdpfxoz E Ragj Ahdepn Drive: Servo motor Control: PLC-/servo-controlled bar feed Oil capacity: approx. 80 liters, ISO 100 Subject to changes and errors in the technical data and specifications as well as prior sale.

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines Fedpfjz E N Tlsx Ahdepn • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved!

Condition: used, TECHNICAL DETAILS - Max. bar length : 3200 [mm] Fpedpeu Hackefx Ahdsn - Pusher diameter : 12 [mm]

Condition: used, Brand : LNS QUICK LOAD SERVO Total length: 2570 mm Total width: 1340 mm Depth of the bar feeder: 1000 mm Height: 1240-1520 mm Axis height: 900-1180 mm Retraction device: 600 mm Fsdezl E Eaopfx Ahdjpn Minimum diameter: 6 mm Max. diameter: 80 mm (depending on settings 90mm) Min.bar permissible length: 150 mm Max. Bar permissible lenght: 1470mm (Depending on settings 1500 mm) Max. permissible bar weight: 60 kg Pneumatic feeding: 5 Bar Maximum tyre wear: 6 litres (per loading cycle) Supply voltage: 220-480 volt/ 50 Hz-60Hz Maximum current: 1 A Maximum thrust: 167 Nm Maximum feed rate: > 100 m/min Charging time: 8- 12 sec Loading time for short parts: 4-7 sec

Year of construction: 2001, condition: used, Number of guide tubes: 3, mains connection: 380V, 3-phase, frequency: 50Hz, control voltage: 24VDC, rated current / FLA: 5A, an on-site inspection is possible, not connected to power. Fpodpfx Ajz Egffshdsn

Condition: used, TECHNICAL DETAILS - Bar diameter : 1 - 12 [mm] - Bar length : 2000 [mm] Fedpfsvxlmuex Ahdopn

Condition: used, Year of construction: 2018, LNS QUICK LOAD SERVO III, year 2018 Fedjzpyq Eepfx Ahdopn in very good condition.

Condition: used, TECHNICAL DETAILS - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3990 x 400 [mm] Fpedpfez Dk N Sox Ahdsn - Machine height : 850 - 1200 [mm]

Condition: used, TECHNICAL DETAILS - Bar diameter : 12 maxi [mm] - Bar length : 3200 [mm] - Pushcart diameter : 10.2 [mm] - Channel diameter : 12 [mm] Fjdjuhbl Hopfx Ahdepn - Supply voltage : 400 [V] - Machine weight : 600 [kg]

Condition: used, TECHNICAL DETAILS - Bar diameter : 2 - 20 [mm] Fpsdpfx Asz Dk N Eohdsn - Bar length : 3000 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3990 x 400 [mm] - Machine height : 850 - 1200 [mm]

Condition: used, TECHNICAL DETAILS Fsdpsz Dk Nxsfx Ahdspn - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3990 x 400 [mm] - Machine height : 850 - 1200 [mm]

Year of construction: 2005, condition: ready for operation (used), Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible. Fsdpfx Aoxl Upnjhdjpn

Condition: used, TECHNICAL DETAILS - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3990 x 400 [mm] - Machine height : 850 - 1200 [mm] Fpsdpfx Aez Dk Nrohdsn