Wall-mounted welding fume extraction

KEMPER 832 000 0002

Year of construction: 2018, condition: like new (used), Dumeta welding rotary table hydraulic height adjustable 500 Kg load capacity welding turntable height adjustable with through hole 100 - 200mm plate diameter 700mm Isdpfxohua Dqo Af Soik Height horizontal min. 0,6m, max. 1,2m height tilted min. 0,40m, max. 1,0m speed from 0,11 - 1,25 rpm Weight 750 Kg Tilt up to 135 hand and foot remote control with speed indicator very robust

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013. Iodpfotp Dhpox Af Sjik

Condition: good (used), Year of construction: 2012, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel (propan) torches Beuting oscillating discharge table Donaldson DFPRO12 filtration system for outdoor installation Iiodpfxju U Hm Ae Af Sok 161225ä

Condition: new, table diameter 700 mm Isdpofv Azlofx Af Ssik table load 0,5 t swivelling range 0 - 135 Grad turning speeds 0,2 - 3 U/min height adjustment 400 - 900 mm boring diameter 100 mm welding current max. 500 Ampere total power requirement 0,75 kW including remote control and welding current transmission.

Condition: new, sheet width 1070 mm Iijdpfxevki E Se Af Sok plate thickness 4 mm distance between columns 1100 mm diameter of upper rolls 110 mm total power requirement 5,0 KW weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,9 x 1,1 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Kronos KR25SP Automatic gantry CNC Thermal cutting systems for large plates Plate size ( max.MM ) 2540 x 6000 Plate thickness with plasma ( max.no.) 50 Iiodov Iaqyjpfx Af Sek Plasma straight torches ( max.no) 1 Plasma bevel torches ( max.no.) 1 Plate thickness with oxy-fuel ( max.no.) 150 Oxy-fuel-fuel torches [max.no.] 4 Machine weight [kg] 2500 This machine has been completely cleaned and checked. For more information, please contact us.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low Iiodpfx Aovpalaof Sjk ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: as good as new (ex-display), Year of construction: 2024, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm Iisdpfxjxaaa Uj Af Sok roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm bending speed 5.3 m/min engine output 2.2 kW weight 1360 kg range L-W-H 2320 x 900 x 1200 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 29169319, type of input current: three-phase, input voltage: 400 V, type of cooling: water, open-circuit voltage: 73 V, welding current at 60% duty cycle: 360 A, welding current at 100% duty cycle: 320 A, protection type (IP code): IP23, welding current (max.): 400 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, TPS 400i Pulse Professional welding machine Very well-maintained condition. Not in continuous use! Serviced and inspected directly by Fronius. Latest software update in 2023 Torch package for 1.2mm wire (parts for 1mm wire also included) Isdpfx Aexzcyyjf Soik Commissioned in 2019

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, filter area: 50 m², suction capacity: 6,000 m³/h, compressed air connection: 5 bar, power: 5.5 kW (7.48 HP), Equipment: type plate available, Teka Filtercube 4H Year of manufacture: 2019. 5.5 KW / 11.5A - Equipped with Softstarter and Siemens PLC control. - Includes 4x25m2 NEW filter cartridges installed in the unit. - Fitted with compressed air cleaning system, Delta P controlled. - Ex works Soerendonk (NL), loaded onto truck free of cost. Tested and operational in our workshop. Iiodpfjxuqurex Af Sok - Supplied with Softstarter option included. - Including 4x 25m2 NEW filter cartridges fitted in the machine. - Fitted with compressed air dust discharge system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of cost. - Sold as is, no warranty. - Tested on site in proper working condition. - Testing and inspection possible.