Lathe gurutzpe Super-A 3000/500 - 325mmm

Gurutzpe Super-A 3000/500

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit Codpfx Apjycvaqjijri - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 70.0961.000.253, TECHNICAL DETAILS: Turning diameter: - Over bed: 800 mm - Over carriage: 560 mm - Diamter of face plate: 750 mm Height of centers: - Over flat ways: 380 mm - Over Vee ways: 358 mm Gap, bed and gap piece: - Turning diameter in gap: 980 mm - Width of gap in front of face plate: 380 mm - Swing in gap: 1040 mm - Width of gap in front of face plate within swing diamter: 330 mm - Width of bed: 560 mm Headstock spindle: - Diameter of spindle bore: 90 mm - Spindle diamteres in front bearing: 145 mm - Taper in spindle: 6 Morse Spindle speeds: - Number: 18 - Spindle speed ranges: 7,1 - 355 RPM Cjdeup A Rzopfx Apijri 9,0 - 450 RPM 11,2 - 560 RPM Power required: 7,5 - 14 kW Feeds: - Number: 32 - Sliding feeds per revolution: 32 longitudal feeds: 0,071 - 2,5 mm/rev. 32 cross feeds: 0,04 - 1,4 mm/rev. Extras: additional equipment, manuals for machine

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, Single-color flexographic printer for tissue paper. Year: 1991 Model: Fabio Perini 8930 Cedsy Iddvepfx Apiori Printing width: 2800 mm This printing unit must be integrated into your converting line.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning height: 1,500 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,700 mm, feed length X-axis: 1,100 mm, feed length Z-axis: 1,200 mm, faceplate diameter: 1,450 mm, feed rate Y-axis: 300 m/min, feed rate Z-axis: 300 m/min, total width: 5,000 mm, total length: 5,500 mm, rapid traverse X-axis: 4,000 m/min, rapid traverse Y-axis: 4,000 m/min, type of input current: three-phase, rotational speed (max.): 200 rpm, rotational speed (min.): 200 rpm, spindle speed (max.): 200 rpm, table load: 8,000 kg, year of last overhaul: 2025, travel distance X-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, stroke length: 1,200 mm, disc diameter: 1,450 mm, overall weight: 21,000 kg, tool weight: 3,000 g, power of the servo motor: 40,000 W, repeat accuracy: 0.01 mm, Equipment: documentation/manual, CNC vertical lathe SC17, completely modernized in 2025 with Fanuc control. The machine is in very good condition, fully functional, live and available for inspection and testing. Technical specifications: Maximum turning diameter: 1700 mm Maximum workpiece height: 1500 mm CNC: Fanuc (complete modernization in 2025) Condition: functional, live Type: vertical turret lathe Advantages: Recent modernization - no additional investment required Reliable Fanuc control system Suitable for large workpieces Video available on request. Price on request Cedoyxfgmspfx Apiori

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Credpfx Apexlngaoisi Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: refurbished (used), CN Centerless grinding machine Cedpfsmmqirex Apisri ROSSI MONZA 1500 CN currently being overhauled and fully electrically/electronically retrofitted Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing Grinding wheel 350 mm * 610 mm dia This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Grinding wheel width: 350 Grinding wheel diameter: 600 CNC: Siemens

Condition: not inspected (used), Please see technical details on photo. Codshvzxzepfx Apieri

Condition: good (used), Year of construction: 2001, functionality: fully functional, Horizontal Boring Mill UNION T110 Year of manufacture: 2001 Travel axes: X: 1500 mm Y: 1250 mm (total vertical adjustment) 0 mm - lowest position of the spindle center to the table surface Z: 1000 mm W: 550 mm (quill movement) Credjy Rpm Ujpfx Apioi B: 360° infinitely variable Spindle diameter: 110 mm Transmission steps: 2 Max. spindle speed: 4000 rpm Rapid traverse: 15 m/min Spindle taper: SK 50 Clamping table surface: 1000 x 1250 mm T-slot width: 22 mm Height of clamping surface above floor: 1050 mm Max. table load: 6 t Total weight (complete): approx. 13.5 t Control system: Heidenhain TNC 426 Electronic handwheel Various tool holders can be purchased additionally.

Condition: good (used), Year of construction: 2017, turning height: 1,600 mm, workpiece weight (max.): 16,000 kg, Videos of the machine in operation can be provided upon request. Max. turning diameter: 3200 mm Table diameter: 2800 mm Max. turning height: 1600 mm Max. workpiece weight: 16,000 kg Table speed range: 70 rpm Number of table speed ranges: constant Cedpfx Apeyrflzsieri Vertical movement in the Z-axis (ram stroke): 1100 mm Horizontal slide travel in the X-axis: 1720 mm Working feed rate range: 2 - 2000 mm/min Rapid traverse in the X/Z axis: 7 m/min Crossrail traverse: 360 mm/min Main motor power: 55 kW Installed power: 69 kW Dimensions: 5500 x 6540 x 4900 mm Weight: 43,000 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 Csdpfx Apsxur E Ssieri - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders