Horizontal lathes Gurutzpe SUPER-BT 1300x4000

Gurutzpe

Condition: used, Year of construction: 1978, functionality: fully functional, spindle bore: 250 mm, overall weight: 11,000 kg, Brand: Gurutzpe Model: Super AT 8000/600 Distance between centers: 8,000mm Swing over bed: 1,200mm Swing over carriage: 910mm Spindle bore: 250mm Gap: - Maximum admissible diameter: 1,500mm - Length in front of spindle: 410mm Powered carriage Maximum load between centers: 3,500kg Maximum load with one steady rest: 4,400kg Maximum load with two steady rests: 5,300kg Hjdpfxsyc R I Aj Ah Sjnu Motor power: 15Hp Weight: 11,000kg Includes: - TdG 3-jaw chuck 520mm with internal, external, and soft jaws - Faceplate 1,100mm - Closed steady rest 500mm - Open steady rest with support 800mm - Open steady rest turret 100mm - Various lathe tools - 4-jaw chuck 700mm with 250mm spindle bore - 4-jaw chuck 800mm with 250mm spindle bore Year of lathe: 1978 *Original manual available

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm Hnodezuyfaopfx Ah Seu center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: good (used), turning diameter over cross slide: 380 mm, spindle bore: 70 mm, turning diameter: 640 mm, turning diameter over bed slide: 900 mm, Characteristics: Length between points: 2.000mm Diameter admitted on bed: 640mm Hnjdpfx Ahsudh Sle Ssu Diameter admitted on carriage: 380mm Diameter admitted on neckline: 900mm Shank pitch: 70mm Includes: 400mm 3-jaw chuck 390mm 4 independent jaw chuck Open steady rest and closed steady rest Quick-change toolholder with 4 tool holders.

Condition: good (used), GURUTZPE second hand lathe Brand: GURUTZPE Model: Super-A 3000/500 No.: 232 Distance between points: 3000mm Cane pitch: 325mm Center height: 500mm Maximum turning diameter: 1400mm Maximum diameter on bench: 1000mm Maximum diameter over trolley: 740mm Speeds: 16 Visualizer: FAGOR Model: NV 300T Hsdsh Ryfhspfx Ah Ssnu It includes: - Dish - Lunettes

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Hnsdpfx Ahevyyyxe Sou Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: used, total length: 3,700 mm, total width: 1,100 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 2000 - Bed width [mm]: 385 - Spindle bore [mm]: 73 - Min. spindle speed [rpm]: 26 - Max. spindle speed [rpm]: 1100 - Options: Fixed steady, Removable bed, Three-jaw chuck, Travelling steady - Swing over removable bed [mm]: 750 - Transport dimensions: 3700mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information Hsdpfxez Et Uae Ah Senu VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1996, spindle bore: 105 mm, Brand: GURUTZPE Type: A 800 CNC 2000 Year of build: 1996 Serial number: 1-27 Electric connection: 380 V Manual present: true Machine weight: 11000 kg Dimension l: 7300 mm Dimension w: 2200 mm Dimension h: 2350 mm Terms of delivery: Ex foundation-unpackaged Additional information: - Total installed power 40.40 KW. - Maximum turning length 2000 mm. - Turning on 600 mm bed. - Turning on a 500 mm carriage. - Bar pitch diameter 102 mm. - X-axis travel: 350 mm. - X-axis fast feed speed: 6 m/min. - Z-axis fast feed speed: 10 m/min. - Turret: 12 positions, the tools that appear in the photographs are included. Hodpsz D U Swefx Ah Sjnu - Main spindle: motor power 37 KW, maximum rotation speed 1800 rpm. - 3-jaw plate with a diameter of 500 mm. - Tailstock: Shank diameter 160 mm, rod travel 130 mm. - SIEMENS SINUMERIK control. - Equipped with automatic hydraulic window. - Chip extractor. - Accessories and cutting tools are included.

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm Hnodpfexrd Rnsx Ah Sju • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Hjdpfx Aeztz Hcsh Senu

Condition: excellent (used), functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 260 mm, spindle speed (max.): 800 rpm, travel distance X-axis: 3,000 mm, rotational speed (max.): 800 rpm, distance table center to spindle nose: 3,000 mm, Equipment: rotational speed infinitely variable, Gurutzpe A1000 x 3000mm lathe with Fagor 8037 CNC, equipped with a 3-jaw hydraulic chuck, 260mm spindle bore, 1000mm swing over the bed, 600mm swing over the cross slide, 260mm tailstock bore, 2 speed ranges of 0-800 rpm, rapid traverse on the X-axis at 8 m/min, rapid traverse on the Z-axis at 8 m/min, rapid traverse at 8 mpm, 140mm tailstock diameter, Morse 6 taper, 650mm bed width, 27 kW power, 12-ton weight. The lathe is in very good condition. Hnedpfx Ahjztz A Ro Seu

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Hedpfx Ajxmd U Aoh Ssnu Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Hedpfx Ajwd D Itoh Sjnu

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Hnjdpfx Ahev Rm Iws Seu

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Hsdpfx Ahsu Nwfue Sjnu Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: excellent (used), turning diameter over cross slide: 1,100 mm, spindle bore: 102 mm, turning diameter: 1,600 mm, turning diameter over bed slide: 1,950 mm, center height in crank: 800 mm, Lathe Gurutzpe Super BT 800 x 2000 mm e.p,with dimension display,turning on bed 1580mm,on cross slide 1100mm,on the neckline 1950mm,length of the neckline in front of the chuck 620mm,shank hole 102mm,36 speeds 2,8-400rpm,motor 30cv,4-jaw independent chuck diameter 1400mm, bed width 800mm, tailstock shaft diameter 180mm, lathe with dimension display, max weight on lathe between points 10tns with one steady rest 12tns, estimated weight of lathe and tooling 14450kg. Hsdpfxjq R Rkns Ah Sjnu