CNC lathe with 1200mm turning diameter

Gurutzpe AT-plus 2000 x 600

Condition: used, Year of construction: 2021, Horizontal precision lathe M.C.M. ATL HEAVY PLUS 900x14000 with CNC control Fanuc Condition: Used Year of manufacture: 2021 Technical data: Centre height: 900 mm Swing diameter over bed: 1800 mm Swing diameter over cross slide: 1400 mm Distance between centres: 14000 mm Max. workpiece weight between centres: 15000/18000 kg Bed width: 1100 mm Number of bed ways: 3 (2+1) Fgedpfeywhhkjx Akrjd Equipment: - FANUC CNC control, model FANUC 32i-B with MANUAL GUIDE i - Automatic turret with 12 positions and driven tool stations (Baruffaldi) MOD. TBMA 320 BDI 60 + C-axis - Chip conveyor (front) - Chip conveyor (rear) - 2 steady rests, diameter up to 600 mm - 2 steady rests, diameter up to 1100 mm

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Fedpfoxtbf Ejx Akregd Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Year of construction: 1996, turning diameter over cross slide: 1,000 mm, turning length: 4,000 mm, turning diameter: 1,450 mm, spindle bore: 150 mm, rotational speed (max.): 560 rpm, overall weight: 20,000 kg, CNC NUM T Plus Capacity 4000 x 1450 mm on bed 1000 mm on cross-slide 4-jaw chuck 1200 mm Steady rest Automatic turret Fgsdpfjyzhrkjx Akrjd Set of tool holders Weight 20,000 kg

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,250 mm, table load: 6,300 kg, spindle diameter: 120 mm, spindle speed (min.): 2,000 rpm, quill travel distance: 600 mm, quill stroke: 600 mm, quill diameter: 120 mm, Control: Wotan 1500 Dialog, SK50 DIN 69871, complete documentation available, table size 1600 x 1250, T-slot width 22 H7, Heidenhain linear scales/measurement systems, Siemens feed drive. Fgjdeyxwwwspfx Akred

Condition: excellent (used), Face plate diameter 1000 mm Spindle mount DIN 55027 - size 11 Weight 520 kg Fgjdpfx Akowgk Ilsred Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 4,000 mm, table width: 1,000 mm, CNC ECS 2301 (with the possibility of retrofitting) SPINDLE ISO 50 DIN 2080 taper AC motor: 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3.000 rpm Two automatic ranges TABLE (X-axis) Length 4.000 mm Width 1.000 mm Travel 4.000 mm Number of T-slots: 7 Width of slots: 18 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' HEAD (Y-axis RAM) Y-axis travel 1.000 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' VERTICAL CARRIAGE (Z-axis) Z-axis travel 1.500 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' COLUMN (W-axis) Fgjdpow Axmnofx Akrod W-axis travel mm 1.300 Working feed mm/1' 0 – 8.000 Rapid feed mm/1' - 15.000 ACCESSORIES: 40-position tool magazine

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 Fgodpfxev If T Ts Akred GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 1982, spindle diameter 150 mm x-travel 3.000 mm y-travel 2.000 mm spindle stroke 700 mm ram: horizontal adjustment 700 mm dimension of the ram 340 x 340 mm spindle taper ISO 50 spindle turning speed range 2 - 2.500 U/min feed 5000 mm/min rapid traverse 10 m/min table surface area 2.500 x 2.000 mm table load capacity 25.000 KG B - axis 360 ° total power requirement 100 kW weight of the machine ca. 38,5 t dimensions of the machine ca. 8,40 x 6,80 x 5,90 m Retrofit in 2004 Fgjdpfx Ajyw Th Ajkred

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Fsdpfx Asx Di Rqekregd Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1988, turning diameter over bed 1200 mm turning diameter over slide rest . mm turning length 5000 mm digital readout Digitalanzeige centre height 600 mm 55 PS spindle turning speed range 5-1000 U/min Rapid movement längs 4000 mm/min accessories: Futter, Planscheibe accessories: Stahlhalter, Lynetten Weight without Lynette zwischen Spitzen 8000 kg Weight with Lynette zwischen Spitzen 11500 kg Rapid movement quer 2000 mm/min weight of the machine ca. ca. 20 t Fgedpfx Akoyqvpnjrjd The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team