Face plate

BISON 1000-11

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Iijdpfx Ajxgdfbjf Ssk Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1200 operating hours is available. The working area includes a swing diameter of approx. 1100 mm over bed and approx. 800 mm over cross-slide. The tool holder is a Multifix D1. The distance between centers is 2000 mm. The main spindle drive is a motor with 46 kW power at 60% duty cycle and features a two-speed gearbox. Isdpjxlza Hefx Af Soik Tailstock: - Quill diameter: 125 mm - Taper: 6 Mk Electrical equipment: - Three-phase current: 400 V, 50 Hz - VDE and EMC directives EN50081-2 / EN50082-2 Delivery: Collection by the buyer Payment: 100% prepayment by bank transfer immediately upon invoicing All details are subject to change and prior sale is reserved. The machine is sold without any warranty claims and remains our property until full payment has been received.

Condition: ready for operation (used), Selfcentering 3-jaw-chuck 800mm Iiodpfov H T E Isx Af Sek

Condition: used, Year of construction: 2009, Spindle head diameter: 75 mm Spindle taper: Morse 5 Spindle stroke: 350 mm Min./max. overhang from the surface of the casing to the spindle axis: 1170/2070 mm Isdpfjvwbccsx Af Soik Min./max. radius at the extreme positions of the spindle: 1370/2270 mm Min./max. distance of the spindle head in the vertical position (with the spindle retracted) from the floor: 305/1555 mm Min./max. distance of the spindle axis in the horizontal position from the floor: 295/2725 mm Vertical adjustment of the arms (stroke): 1250 mm Horizontal adjustment of the arms (travel): 900 mm Arm rotation: 360° Headstock rotation: 360° Headstock rotation from the horizontal position up/down: 90° / 90° Slide travel along the bed (extended): 2500 mm Shell diameter: 400 mm

Condition: like new (used), Year of construction: 2011, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 2300 x 900 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Manual milling head (U22)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 20 - 3000 r.p.m. (4000 r.p.m.)Spindle power: 22 kW Feedrates Rapid feedrate (X-Y-Z):   20000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approx.: 14000 kgMachine dimensions approx.: 6114 x 5070 x 2803 mm Accesories External coolantElectronic handwheel: HR-510New foot clamping tool pedalGuarding and new perimetral safety fence installation Sales conditions Warranty: 6 months mechanical partsSale conditions and price: On request View all technical features Iisdpfx Afowk Rpdo Ssk

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Isdextbf Eopfx Af Seik Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2005, turning diameter over bed 935 mm turning dia. over face-slide 600 mm greates pass round over bed 1.600 mm turning length 2.000 / 3.000 mm control 810D / Manual Turn Siemens centre height 475 mm max. workpiece weight between centers 6.000 kg turning speed range - main spindle 10 - 1.100 min/-1 transmission ratio 4 power capacity - main spindel 37 kW max. Torque 8.000 Nm spindle diameter in front bearing 190 mm spindle bore 155 mm type Parat 4 pos. RD 4 number of cross-slides 1 x-axis 850 mm z-axis ca. 2.100 mm quill stroke 300 mm diameter of quill 140 mm capture MK 6 rapid speed X: 8 m/min rapid speed Z: 6 m/min Iedpfx Asw Spbmof Seik weight of the machine ca. 10,5 t dimensions of the machine ca. 8,00 x 2,30 x 4,00 m Semi-frontal Lathe KREWEMA - HFDM 45 475 x 2000/3000

Condition: excellent (used), Year of construction: 2010, Swing over bed 710 mm Center height 350 mm Distance between centers 3000 mm C-axis +/- 0.05° Spindle speeds 2-1850 rpm Ijdpfxex A Exbo Af Sjik Control: SIEMENS 840D Shop Turn Chip conveyor Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 4,000 mm, table width: 1,000 mm, CNC ECS 2301 (with the possibility of retrofitting) SPINDLE ISO 50 DIN 2080 taper AC motor: 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3.000 rpm Two automatic ranges TABLE (X-axis) Length 4.000 mm Width 1.000 mm Travel 4.000 mm Number of T-slots: 7 Width of slots: 18 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' Iijdpfx Aow Axmnef Sek HEAD (Y-axis RAM) Y-axis travel 1.000 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' VERTICAL CARRIAGE (Z-axis) Z-axis travel 1.500 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' COLUMN (W-axis) W-axis travel mm 1.300 Working feed mm/1' 0 – 8.000 Rapid feed mm/1' - 15.000 ACCESSORIES: 40-position tool magazine

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Iiodpfxsv If T Ts Af Sok Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment