Double-head cutting saw TD 500 GE

GreenMac TD 500 GE

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Kdodpfx Ahjwwvwyswoh

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Kdedpfexnlgcsx Ahwoh Storage location: Garbsen

Year of construction: 2012, condition: ready for operation (used), A Rotox bar processing machine for profile machining in window construction is available. Profile width range: 60mm-120mm, profile height range: 55mm-120mm, min. bar length: 300mm, max. bar length: 4650mm, axes: 3, output capacity: approx. 60-140 windows/shift. Machine dimensions X/Y/Z: approx. 10500mm/3500mm/2100mm, weight: approx. 4300kg. Documentation available. An on-site inspection is possible. Expected to be available at the end of 2026. Kdsdpfoxvru Ajx Ahweh

Condition: good (used), Year of construction: 2012, machine/vehicle number: 2445131603, Offer 26052 Technical Data: - Saw blade diameter: 550 mm - Maximum cutting length: 6000 mm - Minimum cutting length at 90° + 45°: 335 mm - Cutting range: see attached diagram - Swivel range inward, pneumatic: 90° - 45° - Swivel range inward, manual: 22.5° - Swivel range outward: 140° - Tilt range inward, pneumatic: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 400 V / 2 x 4000 Watts - Space requirements: approx. W 8000 x H 1600 x D 1400 mm Kedpfxsygv Ddj Ahwodh - Weight: approx. 2500 kg - Equipped with: - PC control E 555/1 for adjustment of cutting lengths - Motorized swiveling and tilting of both units - Automatic spray lubrication device - Traversing roller conveyor

Condition: excellent (used), functionality: fully functional, SCREW AIR COMPRESSOR model KAESER SK 19 with Vertical tank Lt. 750 second hand machine in Excellent working condition motor power Hp 15 ( Kw 11 ) Kedoydiggopfx Ahwsdh working pressure bar 10 volt. 380/50

Condition: excellent (used), functionality: fully functional, Voltage 380 v Absorption 3.5 kW Pressure 6-8 bar Blade motors 2800 g7min. 0.75 kW Blade diameter: 250+175 mm Max profile height 40 mm Minimum profile width 100 mm Minimum profile length 350 mm Kdodpfx Asv S I Arehweh Weight 150 kg Dimensions: 1300x550x1250 (h) mm

Condition: used, Year of construction: 1997, total length: 7,230 mm, total width: 1,450 mm, total height: 1,650 mm, Weight: 1.935 kg Price: On request Ksdpfx Aexwk Dxohwjdh - Year: 1997 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 970114 - Main motor power [kW]: 4.5 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Max. spindle speed [rpm]: 2800 - Transport dimensions: 7230mm x 1450mm x 1650mm (l x w x h) - Transport weight [kg]: 1935kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 1995, machine/vehicle number: 40105, Offer 26053 Technical Data: - Saw blade diameter: 550 mm - Max. cutting length: 6000 mm - Minimum cutting length at 90° + 45°: 350 mm - Cutting area, e.g. 90°: 110 x 390 mm - or as per diagram - Swivel range inward, pneumatically: 90° - 45° - Tilt range inward, pneumatically: 90° - 45° Kodpeyiz Hcsfx Ahwjdh - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 W - Space required approx.: W 7660 x H 1600 x D 1400 mm - Weight approx.: 2100 kg - With: adjustable cutting length and angle, - separate control cabinet, automatic spray unit, - integrated roller conveyor,

Condition: used, Year of construction: 2003, used, good condition Manufacturer: Rapid Model: DGS 200 Year of manufacture: 2003 Machine no.: 404 CE type-tested Motors: 2 x 2.2 kW Cutting width: 4000 mm Cutting depth: 130 x 140 - 100 x 230 - 60 x 270 mm Max. cutting height: 280 x 50 mm Max. blade diameter: 420 mm Tiltable manually 45° Linear feed pneumatic Digital displays for cutting length 4 x pneumatic workpiece clamps - 2 x horizontal, 2 x vertical Horizontal cylinders: 2 Vertical cylinders: 2 Required space approx. 5100 mm x 1180 mm x 1280 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, loaded on truck, unpackaged Transfer in as-is condition as inspected, without warranty or guarantee Kdjdsyclxpepfx Ahwsh

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Saw blade speed: 2800 rpm Ksdpfx Ahoyh Hn Hewjdh Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Weight: 50 kg