Double mitre saw

RAPID DGS 200

Condition: used, 0 4000,5000 mm Working height 120 mm Gjdpfx Ajxmk Ameqxjit 0 ja

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Giedpfx Asxnlgcoqxet Storage location: Garbsen

Condition: good (used), Year of construction: 1997, Double mitre saw RAPID DGS 200 year of construction 1997 drive 2 x 2,2 KW, 400 V swivelling range manual 45° to 90 Saw blade 420 mm Ø Saw feed pneumatic cutting length 4000 mm Profile clamping 2 pcs. horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment manual Godpfx Aqjhctt Eexoit Length display digital Air pressure 7 bar Profile support fixed outside and movable in the middle dimension L/W/H 5200/1200/1500 mm Weight 800 kg

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Giodpewwlk Njfx Aqxet

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Gisdpfjwwvwyex Aqxot

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is almost new, following company liquidation. Giedpoyl R Uhefx Aqxet

Condition: good (used), Year of construction: 1995, machine/vehicle number: 40105, Offer 26053 Gedpfx Ajyiz Hceqxjit Technical Data: - Saw blade diameter: 550 mm - Max. cutting length: 6000 mm - Minimum cutting length at 90° + 45°: 350 mm - Cutting area, e.g. 90°: 110 x 390 mm - or as per diagram - Swivel range inward, pneumatically: 90° - 45° - Tilt range inward, pneumatically: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 W - Space required approx.: W 7660 x H 1600 x D 1400 mm - Weight approx.: 2100 kg - With: adjustable cutting length and angle, - separate control cabinet, automatic spray unit, - integrated roller conveyor,

Condition: excellent (used), functionality: fully functional, Voltage 380 v Absorption 3.5 kW Pressure 6-8 bar Blade motors 2800 g7min. 0.75 kW Blade diameter: 250+175 mm Gjdsv S I Arjpfx Aqxsit Max profile height 40 mm Minimum profile width 100 mm Minimum profile length 350 mm Weight 150 kg Dimensions: 1300x550x1250 (h) mm

Year of construction: 1998, condition: used, functionality: fully functional, Rapid dgl the saw blades automatically adjust to the desired dimension, control via touch panel, blade diameter 500 mm rotation speed 2710 cutting angle 45-90° Godpow I Hz Aofx Aqxjit cutting length approx. 3000 mm pneumatic clamping air requirement 200 NI the saw is in excellent condition, ready for immediate use, testing possible, invoice issued

Condition: good (used), Model: Univer 330IP Double mitre saw / compound mitre saw Year of manufacture: 2001 Motor power: 4.5 kW Maximum cutting length: 3300 mm Minimum cutting length: 240 mm Saw blade diameter: 330 mm Dimensions (L × W × H): approx. 3750 × 940 × 1450 mm Weight: 350 kg Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we recommend checking all relevant details. Gsdpfxoymg D Ue Aqxjit Financial information VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).